Deep Pour Epoxy Resin Liquid Glass 0.75 Gallon / 96 oz Kit, 2-4 inch Super Clear Amazing Flow Casting Resin Kit, High Temp Heat UV Resistant Food Safe Epoxy, Bubble Free Low Viscosity

I recently bought this Epoxy because I needed a deeper pour Epoxy that also needed to be crystal clear for embeds. This product did not disappoint. The cure time is a little longer than your run of the mill epoxy, but the quality of product that came out was worth the wait. Extremely minimal bubbles if any, because I didn't see any. Compared to other Epoxy's the smell was apparent, but not overpowering. The final product was rock hard and durable, worth the price, and I will be using this epoxy again. 5 stars for a really great epoxy.

Ok, 5 stars. Why? A great product! It is like glass when solid. It is moderately thin so bubbles come out easily. Ease of use - 3 stars - Might as well know up front, if you are in a hurry, this is not for you. Practice, practice and practice is the key to using this stuff. I probably went through a quart or more just practicing. To back up a bit, this was my first project with it and first time use ever with any clear epoxy. The project was 20”x12’x1.25”. It took multiple mixes and pours, which I did one right after the other. So the cure process was the whole thickness. It does generate a lot of heat. Enough heat that it cause a sheet of plexiglass that I was using as a dust cover over heated and sagged into the resin. I panicked but was able to release the plexiglass from the cured resin with a heat gun and all was OK. My warning is, they say it will heat up, they mean it and be prepared. The cure time is 1 to 2 days at this thickness. Mixing is a big deal with this stuff. When they say mix for 5 min, then pour into another container and mix some more and then mix some more, they mean it. I used wood 1 qt paint sticks, which worked for the 28 oz mixes I did. When I started mixing the resin would turn milky. After a while (over 5 min for me) it would turn clear. But I could still see wispy threads through the mixture. So more mixing. Then there was the pour into a second container and more mixing. At least 10 min of mixing per batch. A trick I found to keep bubble out was to set one of the paint sticks in the mixing container before pouring in the resins. Then pour the resins onto the stick and let it run down the stick. I did this with the base resin and the hardener. And then I did the some thing to pour the mixture into what I was making. Hope this helps. I did practice with a few thin pours (less than a half inch). These took at least 3 days to cure. So, while it could be used for that, it would be better to use their other product. So a great product, but takes slow and careful effort to use.

This epoxy resin is pretty awesome. Make sure you follow the directions. It's a 2-to-1 ratio. 2 of part A to 1 of part B. So if it's 100 mm of A then only 50 mm of B. Make sure you apply it in a dust free setting within the correct temperature range. My wooden table stump came out excellent it has a very nice crystal sign to it. My wooden table stump came out excellent it has a very nice glass look to it

I was gifted a rare piece of Canadian Redwood that had floated in the Gulf of Mexico for years, and pulled from the Gulf back in 1970. It was full of sea slug holes, and looked beautiful, but was very fragile, in some places most of the wood was missing due to the slug holes. After consideration, a guitar was the only way to go, since the gifting person's dad was there with him in 1970, and was an accomplished guitar player. Acrylic was the only way to go, since I decided to build a Telecaster electric guitar, and needed to encase the wood so it would be stable. In some places the holes go right through, and you can see clearly through them, this stuff is so crystal. This was about a 1 3/4" thick pour, and with all the holes, I knew I needed to put in a thin layer on the bottom of the mold I built, then lay the wood in, and pour the rest. Worked well. The product performed exactly as advertised. Set up nice, crystal clear, some bubbles got caught due to all the hundreds of holes in the wood, but that was to be expected. I just left them, since they were down a ways, and didn't hurt the structural integrity. Actually, it worked a bit faster than I thought, and in about 72 hours it was totally firm, and I peeled off the mold and began finishing the edges and polishing it. What I DIDN'T expect, was after about three additional days, with just the edges of the guitar to polish off and a few light scratches on the back from the mold, was that the product got SO HARD, I found I didn't have a polish or compound in my shop that would touch it. Now let it be said, I do a lot of golf club restoration, woodworking, file, planer blade and knife sharpening in my shop and I have compounds that will move stainless steel. Not this stuff. Once it fully cured, I could router it,(slowly), to make my neck pocket, control area and pickup holes, but polish it? Forget about it. I worked on it for days, and moved maybe .001 of the stuff. So although a great product, you had better get it polished within the first three days of hardening. For the record, I used a digital scale, calibrated, that measures out to a tenth of an ounce. I made sure the product was measured correctly. Been down that "it didn't cure right" road before. Mixing is everything also, and I used a wooden mixer I made on my lathe that matched the taper of the bottom of my containers that would also go into a drill, so I could mix it completely. Curing not a problem - hardening, Whoh...

Great product easy to work with fantastic quality finish

We use this to cast our daughter‘s wedding flowers into a 3 inch deep mold. 1) the directions tell you to stir for five minutes and then dump it into a second bucket and stir for another five minutes. Feels like overkill. But we did this and it worked perfectly with no issues. 2) when pouring from one bucket into the other bucket or the mold, we pour it onto the wooden paint stir and let it run down, which minimized air bubbles. We had zero issues with air bubbles with the finished product. 3) this product took close to 10+ hours to set up. So you have a long working time. 4) product was crystal clear and you could not tell where the individual pours or layers occurred. 5) cover your work if you can to prevent any dust or particles to settle on the top of it while it’s curing. 6) since we were casting flowers into a form we thought we could fill it halfway, place the flowers, and then finish the pour. We quickly learned that flowers float, and you had to wait for it to cure before the next layer could be poured on top. Therefore, we had to throw out mixed product and order additional. I would highly recommend this product to friends and family. But note that it is expensive.

I absolutely love this resin! I've made a number of things with it from earrings to pyramids, keychains and popsockets. You can use it for small intricate molds because it has a thin viscosity and will flow into small details easily. Also, for larger molds because you can pour up to 4" deep. It's awesome to have that kind of versatility! It does not have a strong odor (I still wear a respirator when usung though) and it's a 2:1 ratio so measure correctly! A couple things to keep in mind. 1: It does not suspend things like glitter. If you use glitter understand it will sink to the bottom of your mold. You can use this to your advantage as I did with my "boo" earrings pictured. The bottom of the mold became the front on the earrings where the glitter settled. 2: It takes two days to cure to the point where you can unmold and another day to fully harden. But man when it's fully cured it's nice and hard and very shiny! Beautiful resin! Another thing I want to mention is bubbles. There will be bubbles in any resin you use. However with Liquid Glass because it has a longer cure to it has longer to release those bubbles. This resin has a nice long working time too! I love that because I'm usually working on multiple projects at once. The long working time allows me to keep a large cup of clear resin on my table, then pour into smaller cups and add different colors as I go. I hope that makes sense. I've never really needed to work with it for longer than 40 minutes maybe an hour but it stayed nice and liquid that entire time. The only thing I would change is the price. It's not terribly expensive but as a small business owner I like to get my supplies as cheap as possible. I will always continue to buy liquid glass, it's awesome!

This stuff is very thin and watery so it penetrates into every little detail of your mold. I used this with a silicone mold with mold release that I got at the local big hobby store. The reproduction quality is great, and leaves very crisp, sharp, edges without any indications of bubbles or anything. It does take 3 days to cure; I didn't realize that when I bought it, but that's ok.