Pop Filter, [Upgraded Three Layers] Metal Mesh & Foam & Etamine Layer Microphone Windscreen Cover Handheld Mic Shield Mask,Microphone Accessories for Vocal Recording,YouTube Videos,Streaming

I didn't hold out a ton of hope for this little guy, being its small stature, small price and what I assumed were super cheap materials. But for the price (and the promise of free returns) I thought it would be worth a try. I'm glad to report I was very satisfied with its performance. I'm a Composer/Sound Designer and do a ton of voiceover as well. I did a lengthy voice session last night using only this as a pop filter, after testing it extensively for its intended purpose of removing plosives. The thing was great! It wasn't too bad fitting it over a large condenser mic and using it for side-address positioning. It is definitely a minimalist design, but the construction seems to be good enough to last a long while. Shipping was fast, it came packaged well and the "chemical smell," a review mentioned wasn't even an issue. There was a slight smell when first opening the box, but that is what I call, "New Gear Smell," and I actually like it. It faded fast once unwrapped, btw. I figured I would at least need to use one of the traditional "pantyhose-on-a-hanger" pop filters in front of this device, but I quickly found this wasn't needed at all. I POPPED the screen many times during my voiceover tests (harder than I would ever need to in a real session) and this thing prevented them all. I do not agree that it prevents unwanted room sound or noise, so I use a big shield attached to the mic stand to accomplish this. The only minor issue I had, is that it does affect the sound slightly, removing some of the high-mid frequencies (I have a deep baritone voice) but this is more of a nitpick, which I corrected using a little EQ to sharpen up that part of the spectrum. All in all, I love this thing! It's a great solution to a bulky and sometimes very ineffective solution.

I am using this pop filter on my Sennheiser Professional Profile, and it works great! I did need to flip it upside down in order to retain access to my dials, but that is hardly an issue. Maybe I had it upside down originally and this is actually correct. There isn't any branding on it thankfully, so it doesn't matter. As for the job it is meant to do, I can definitely tell the difference, but I do wish it were just a little more effective. That said, for the money, this is a no brainer. If you just want an improvement without the need for studio quality or studio pricing, then this is the pop filter for you. It even came with extras bands in case the first set break (not that I find that likely). If nothing else, this is an excellent spit guard

I used this with a Rode NT-USB Mini to provide just a bit more buffer against plosives — the P's and B's sounds that can be harsh on microphones. Works decent enough. Little weird to install it but it's lightweight and decent value for the money.

It works as well as the pop filter that came with my mic while being so much better looking and way smaller. Installation was easy, but be sure to stretch the rubber bands across all four pegs for a better fit. At first, I had the bands only stretched across the two outer pegs and the microphone wasn’t centered and was wobbly. The look is fantastic. I use a cheap Tonor mic for some of my recordings and this filter makes it look much more professional. It also works as well as the filter that came with the mic, but that filter is a big circle that connects to the arm, rather than the mic. It looks terrible on camera. Replacing it with this filter made the microphone setup look a lot better and swivel around easier. Definitely would recommend this filter. It’s a huge upgrade over the big circle kind.

Simple enough for people to set up without having any prior experience with microphone accessories. It’s metal, not fabric, so there’s no muffling on the audio input. Only downside is that it’s not as lenient when it comes to different types of mics. You can still put it on, but unless your microphone has a solo stand, it won’t be put on the way it’s necessarily supposed to be. Great value for money. Nice look to it. Fits decent.

This simple design works great, to filter plosives, and smooth out the sound from my condenser mic. I use an Audio Technica AT3035, and this pop screen works, as well as any I have used- without the annoying "gooseneck", weighing down my swing arm... or the cumbersome screen ring, blocking the view of my scripts. Best of all, the rubber bands which hold the filter to the mic, make no scratches, and transfer NO VIBRATION... if fact, attached to the mic, the whole assembly rides the same shock-mount, as the mic- alone. And- just like the gooseneck, ring filter, this does NOT obstruct the rear of the mic- so your cardioid mic, stays cardioid. This pop screen isn't compatible with the foam windscreen that came with the mic- but then, you wouldn't want to use both, anyway.

The filter does its job at taming harsh sounds and keeping the audio level stable. I enjoyed using this until the strap broke on its own. The strap holding this filter onto the mic is a thick rubber band, kind of like a gasket. I put in on Razer Emote microphone and left it untouched for 3 months until the strap ripped itself. The strap wasn't overstretched or anything. Including extra strap would be nice.

It's well priced and works great. The mesh is metal and the housing is cheap plastic. The cheap plastic should not break as long as you don't treat it harshly. The housing is actually two pieces that you can unclip and slide apart, allowing you to remove the metal and foam filters individually for cleaning, then reassemble. It also comes with some extra rubber bands just in case. I am very pleased with this.

Kendi çapımda Youtube kanalım olduğu ve arkadaşlarla VC girdiğimde eski kayıtlarla karşılaştırınca etkisini fark ettim.

Good product

Picked up the Aokeo pop filter for my microphone, and it does the job nicely. Flexible gooseneck lets you position it exactly where you need, and it really reduces those annoying “p” and “b” pops when recording vocals. Perfect for YouTube videos, streaming, or podcasting. Only minor gripe is the clamp isn’t super large, so make sure your mic stand fits it. Otherwise, simple, effective, and a must-have for cleaner recordings.

Perfecto para evitar los soplidos, sonidos al tragar saliva y, sobre todo, las explosiones con las letras b y p. En mi caso lo coloqué sobre una espuma que ya tenía en el micrófono y que era insuficiente para evitar el mencionado problema, para ello retiré las gomas que trae y quedó perfectamente encajado. Buen material y buen funcionamiento.

J'enregistre depuis peu ma voix sur des videos et j'avais besoin de quelque chose de simple et efficace. Le produit correspond parfaitement a mes attentes.