Bones Bearings Press Puller Bearing Tool Skate Tool

I live by the beach in Miami and use my longboard to get around almost everywhere, including to and from work as far as 6 miles each way. with all the puddles, sand and surprise florida downpours, i end up cleaning both mine and my girlfriends bearings quite often. I personally don't like using my trucks axles to pry out the bearings so I wanted something that I could use regularly to do this without damaging the bearings. This tool is amazing, its the size of a large keychain trinket, just a few inches long but made sturdy of all metal. The two balls on the end retract when you push the button at the top, allowing you to push it through the bearing, release the button and easily pull the bearing out, if you have spacers like me, you can use this tool just like your truck axels, insert it into the bearing, and use it as a lever to pry the bearing out. it fits so well into the center of the bearing that this causes no damage whatsoever. and it works just as well to push them back in.

Works great. Excellent way to remove bearings safely and easily. This is a great tool!! Small and stores easily. Just replaced an entire set of wheels with all new bearings and was a snap. I removed the bearings from the old wheels very easily and no damage tot he bearings.

Thank goodness for this tool. I nearly had to break my bearings before to get them out of any wheel with an aluminum hub. This sucker pulls them right out. And I don't need a giant bearing press to do it! Presses bearings in, pulls them back out. Has a hole for adding to a lanyard or key chain. Worth every penny.

Best $15 I have spent so far in my short derby career. It took me 10 minutes to switch out my bearings, and most of that was cleaning the gunk off of them. It was a pleasure to pull and press them in, and I didn't feel like I was damaging my wheels like I did when I used a screwdriver to remove them. It is super small and easy to carry. I would like to sing love songs about this bearing press/puller.

Puller works as expected, but the handle is a little small and not ergonomically contoured well. The edges of the handle bite into my fingers if I have a jammed bearing in a wheel. The hole for a key ring was a little smaller than needed for flexible positioning in a pocket, and far enough from the edge to make installing a ring harder than it needed to be. Over time, the hole will wear wider and the ring will tilt more. Overall, this is a solid tool that works as intended to pull bearings from skates, but if using steel inside spacers, the bearing has to be rocked out slightly before the balls of the tool will grab it.

They work with ease. Great tool if you change out wheels or clean your bearings often!

If you break this product, you must be REALLY pulling/pushing on it. This is a great product and it's really easy to use. Before I bought this I used a screwdriver and my thumbs to put in and push out my bearings. But with this, I can do it really easy. I don't even need to touch the bearings. This is great if you take out an put in bearings a lot. It doesn't damage them at all.

This thing is cool if you wanna pull yout bearings out super quick without damaging them then this tool is the one you want. Ive been skating awhile and have messed up several sets of bearing due to removing from old wheels. Tapping them out of the wheel or using your truck to get them out can damage the outter race which will no longer roll good. So if this problem is what your having i suggest this awesome tool. Easy to carry and small so fitting it in your pockect is not a problem. Thanks Bones awesome product.

Nice

Good quality tool

Produit beaucoup trop cheap pour le prix demandé. Gros défaut de conception: la tige d'extraction est attachée au support en plastique. Le plastique est trop fin et casse. Si vos bearings rentrent facilement dans vos roues, cet extracteur fonctionne, mais dans ce cas pas besoin d'un extracteur, les trucks ou un tournevis suffisent. Si vos bearings sont durs a sortir, l'extracteur est trop cheap pour aider et va briser. Conclusion: ne pas acheter, beaucoup trop cher pour un produit aussi mal conçu, le rendant inutile et de mauvaise qualité.

Very nice

Product build quality is good but too costly and not does his work, it doesn't pull bearing and need to struggle a lot , we can pull bearing from nail easily but not from this tool.