Fluance RT85 Reference High Fidelity Vinyl Turntable

Great value for the price point. Looks amazing and solid material. Nice hefty size and clean rotation with exposed motor away from the center. The 2M Blue cartridge makes the vintage vinyl sound clear, bright and presents a good sound stage of separation with vocals and instruments. Setup was fairly straightforward, only issue was zeroing out and setting the counterweight, but after about 30 minutes of research it was good to go. The high density acrylic platter is a nice touch. I paired the RT85 with the Fluance PA10 preamp and they both look great together. 10/10 would recommend for anyone looking to upgrade to a turntable under $600. I upgraded from a Audio-Technica AT-LP60XBT. The Fluance RT85 is a manual turntable, not fully automatic, however there is a switch on the back that can be turned on to stop the record from spinning after 30 seconds if you tend to be forgetful. There is no built-in preamplifier so make sure to purchase one from Fluance or any of your choosing that is compatible with your cartridge/stylus.

I bought this to replace an Audio Technica LP-120X USB. That turntable was upgraded with an acrylic platter mat instead of the rubber that came with it. I had also replaced the cartridge with an AT VM540ML/H. This is a definite upgrade from the cartridge that came on that turntable. Because I have that cartridge, I decided to buy the RT85 with the Ortofon 2M Blue cartridge. I think the Nagaoka MP-110 is probably similar to the VM540. The RT85 came quickly and surprisingly was only single boxed. But the contents were very well protected inside. Setup was like most other turntables. This table is smaller than the AT it is replacing but the bamboo veneer gives it a much better appearance. The acrylic platter gets a 10 vs the aluminum platter on the AT. The tonearm, headshell and cueing lever are similar to the AT. However, the tonearm weight has a scale that is almost impossible to read without the assistance of a bright light and maybe even some magnification. The anti skate dial is only slightly easier to read. The AT is much easier to read. Fluance, this needs to be improved. Maybe my eyes failed me when setting the tracking force, but it was off by about 0.2 when I checked it with my scale which was calibrated (1.6g vs 1.8g). Also, I've seen some reviews where people said the speed knob was cheap. It feels fine to me. I do like the on/off knob and start button feature on my AT LP-120 better. But the Fluance is still good. Also, the AT turntable it is replacing has an indentation for storing the 45rpm adapter and place that actually holds a second cartridge. I don't have any 45s, so that doesn't really matter to me, but the cartridge holder is a nice feature on my other turntable. Once it was setup, I grabbed a Pink Floyd album (what else). I played Shine On You Crazy Diamond. It sounded really good and I have to say, I think there may be a little more bass coming from this cartridge setup vs the AT VM540. But I'll need to do some A/B comparisons. Also, a light finger tap on the right side of this turntable is quieter that when tapping the plastic right side of the AT. The same is true when tapping the top of the plinth and much quieter when tapping the left side. Also, the cueing lever is damped much better than the AT. It will just dump the arm onto the record and this one is nice and slow. For reference, the speakers are Q Acoustics 3050 towers and the power comes from a 1990 Denon DRA 1025 (125wpc) which I bought new for $999. I also have a set of Wharfedale Lintons coming later this week and I'm looking so forward to getting them going. So, this is a $500 turntable out of the box. My AT LP-120X with the upgrades (acrylic mat and AT VM540 cartridge/headshell) is now at $650 or maybe more. I can easily change over to the AT VM540 if I want and I don't know of any upgrades I could make to this table. So, it is a better buy. The veneered MDF is prettier and quieter than the black plastic AT LP-120X. The professional reviewers all over the internet and YouTube are correct about this table. I also considered a couple of Dual turntables, Thorens and even a Technics ranging from $599 up to about $1,100. I'm sure the Technics is probably a much better table than this RT85 but Dual is just not the same company it was in the 70s and early 80s. They are no longer made in Germany. I have about 120 vinyl records, maybe a few more and have about 500 CDs. So, I decided that the RT85 is right where I need to be.

Turntable arrived as expected, box was clean and undamaged. It was very easy to set up with the instructions provided and start playing almost immediately. I love the acrylic platter and the ortophon needle sounds great. The finish on the base is very nice, and the three feet are very stable. Have not experienced and skips, the arm tracks cleanly. Speeds work great at both 33 and 45.

I’ve collected vinyl for many decades and have several turntables ranging from vintage Thorens and several Technics to an expensive VPI with Clearaudio Maestro cartridge. I’m a big fan of the Ortofon line and when I saw that the RT85 Reference came with a 2M Blue installed I had to jump at the opportunity. I had purchased speakers from Fluance some years ago and was impressed with their quality and customer service so I expected nothing different with this purchase. I read several of the online reviews that were impressed with the quality of the build, the ease of use, the wonderful Ortofon 2M Blue cartridge and the outstanding sound quality. My unit arrived professionally packed and assembly was a breeze. Kudos for a clearly written user manual. Even though I am not a beginner the clear instructions would be easy for anyone to follow. Once installed I put it to the test with a wide variety of genres and styles of music. I’m still impressed and I’ve been listening every day for a few weeks now. This is a killer combo and I’m still shaking my head in amazement that Fluance has been able to pack so much quality in such an inexpensive unit. The auto stop feature is especially appreciated as my other manual turntables lack anything like that, requiring me to get up and replace the tonearm at the end of each side. While auto stop is not as convenient as semiautomatic, it’s a welcome addition to an otherwise manual turntable. Well done Fluance for putting a quality audio product within reach of almost anyone who is into vinyl. It really shines with my Parks Audio Budgie Tube preamp and has become my favorite turntable!!!! Five solid stars!!!!

Schöner Plattenspieler mit Ortofon 2M Blue. Versand erfolgte aus England innerhalb von 5 Tagen via Prime. Die Verzollung übernahm Amazon. Die drei Füße sind gedämpft und laufen spitz zu um Resonanzen zu vermeiden. Die Ausrichtung ist mit der mitgelieferten Libelle/Wasserwaage einfach, da nur drei Füße. Das Gesamtgewicht beträgt knapp 8 kg. Der Motor läuft für mich unhörbar und treibt den äußeren Riemen an. Die Geschwindigkeit wird mittels Schalter eingestellt. Eine Elektronik überwacht die konstante Geschwindigkeit (angeblich 500x in der Sekunde). Der Tonarm ist aus Alu. Der Plattenteller aus durchsichtigem Acryl und wiegt alleine über 1 kg. Die Haube ist leicht schwarz getönt. Der Schalter für die Geschwindigkeit ist aus schwarz eloxiertem gebürstem Metall. Ebenso auch die Abdeckung für den Motor. Das Antriebsrad ist ebenfalls aus gebürstetem Metall. Sehr chick: Im Außenring des Drehknopfs ist eine kleine weiße LED enthalten, die zeigt, dass der Plattenspieler angeschaltet ist. Es liegen sogar ein hochwertiges Audiokabel, ein Erdungskabel, eine Wasserwaage und weiße Handschuhe bei. Der Tonabnehmer ist vorausgerichtet. In der (englischen) Anleitung steht der notwendige Anpressdruck und das Anti-Skating und ist auch für Einsteiger erklärt, wie man den Tonarm einstellt. Mitgliefert wird ein Netzteil mit UK-Netzstecker. Alternativ zu einem UK-Adapter kann man auch anderweitiges Netzteil mit 12V und 0,5A (6W) und innen plus/außen minus verwenden, wie es beispielsweise hier angeboten wird: https://www.amazon.de/gp/product/B01M1DR19X/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1 Klanglich gefällt mir der Plattenspieler im Zusammenhang mit einem Marantz PM8005 (eingebauter MM-Vorverstärker) und B&W CM9. Ein Vorverstärker ist im Plattenspieler nicht eingebaut. Bzgl. des Auto-Stops: Es dauert eine Weile in der Auslaufrille, bis der Plattenteller tatsächlich stehen bleibt. Der Tonarm wird jedoch nicht angehoben. Beim Zurückschwenken dreht der Plattenteller wieder an. Bei angeschaltetem Auto-Stop springt zusätzlich der Motor erst an, wenn man den Tonarm aus der Halterung bewegt. Wenn der Auto-Stop-Schalter ausgeschaltet ist, startet der Motor direkt nach dem Drehen des Schalters auf 33 bzw. 45, unabhängig vom Tonarm. Ich habe Walnuss bestellt, auf dem Karton steht Walnuss aber drinnen war Bambus (siehe Foto), was (derzeit) so bei Amazon garnicht angeboten wird. Jetzt muss ich mir noch überlegen, ob ich damit leben kann oder nicht... das Bambus ist matt lackiert während Walnuss glänzend lackiert ist. Ich bin kein Bambus Fan, aber da der Tonarm komplett in (matt) schwarz gehalten ist bildet es einen guten Kontrast zur hellen Chassis. Das matte Holz passt auch gut zum Acryl-Teller. Ein Umtausch könnte ohne Rücksendungskosten vollzogen werden. Auch hierfür 5 Sterne für Amazon!

Probablemente el producto más equilibrado y con menos conflictos técnicos en su gama de precio. Muy buen funcionamiento, suave, silencioso, con una buena cápsula MM de origen (Ortofon 2M Blue) y un magnífico acabado. Renovar -mejorando- un veterano Pioneer con 38 años de trabajo en perfectas condiciones de uso y con cápsula PC5 MC no era asunto fácil. Confieso que estoy encantado. Además: es muy bonito; qué quieren que les diga.

I’m absolutely satisfied with this purchase; this turntable offers outstanding value for money. It is easy to set up and delivers excellent sound quality. The Ortofon cartridge certainly plays a significant role, but the overall build is precise and results in superb performance. Highly recommended for audiophiles—far superior to other options such as the Audio-Technica AT-LP120, which has a more basic finish and includes some unnecessary features.

For Christmas, I got the Fluance RT80. I had about 4 or 5 U2 records on vinyl that I had bought over the years, just because I love the band and loved having the physical object with the big 12" covers and inserts and the cool looking albums. Fast forward several months, and I had fallen deep in love with vinyl. I had expanded my U2 collection to all the major albums, most of the Record Store Day singles, and a fair bit of other bands and artists in my eclectic taste like Gorillaz, Bjork, Beatles, Rush, Tame Impala, REM, Huey Lewis, Inhaler, and more... I upgraded my speakers to Paradigm bookshelves, a higher end Yamaha Amp and a good pre-amp, and I was loving it, really enjoying the music but I just needed some more from my RT80's. Just some more punch, high-ends and mids. I loved the sound stage I was getting and other aspects, I just needed more. Digital music from Tidal and even Apple Music was sounding better to my ears. I looked into upgrading my stylus on the RT80 from the Audio-Technica ATN91 Conical Stylus to the Audio-Technica AT95E Elliptical (Eliptical stylus' can get in the groves a little deeper). I was also having a problem levelling my turntable on the surface I needed to use without using annoying shims. Also wasn't sure the AT95E was going to be enough. I decided to sell my RT80 and order the RT85 which I got setup to my system a few days ago. All I'll say is WOW. I know my setup isn't super high end audiophile equipment. There's a world of McIntosh receivers and pre-amps and speakers that go $10,000 and up and it's a world I'll probably never afford... but ****** do I love the sound of this setup! I couldn't stop listening to all my albums. It was the sound I was looking for. I once heard advice that you have an awesome system if you can get emotional about the music you're hearing, and I absolutely love my setup. There's probably still I could get more out of it if I had a better listening room design, which I hope to setup sometime in the future when moving. But for now, I love my setup and this turntable / Ortofon 2m Blue cartridge. The sound stage is bigger... and my ears just hear a lot more of the music and the brighter highs and mids my ears were yearning for. It's a great overall sound now, not to strong in any area and not weak in any area for me... Just a full, clear, punchy but not tiring sound. The thing looks and sounds so good. Love the 3 point levelling feet (Have it perfectly level now), love the motor that keeps accurate time while. super quiet, love the acrylic platter, love it all. The acrylic platter looks so cool, especially at night with a light close by it... it looks like it glows. Coloured records spill their colour into it. Not that looks are the main thing, but I love records for the tactileness of it, the album covers and artwork, and I love it that I love the looks of this turntable. I have zero complaints from it and I highly recommend. I'm listening to albums every evening whether listening intently or playing some tunes in the background while I do dishes. Make me relaxed and ready for the next day and is great for Saturdays and some relaxing with friends and a drink or your buddies who love listening music.

I bought this player to upgrade from a PS-LX310BT. The difference was fantastic and I love this player. It looks and feels premium, and the Ortofon 2M Blue gives a clear and well presented sound. Couldn't be happier and if you're looking to dip into the 'audiophile' world, then I really recommend this player.