SPR457 Elipse P100 Dust Half Mask Respirator with replaceable and reusable filters included, blue, m/l size

As a sufferer of extreme asthma, as someone who can't walk down the street for fear that a clerk on a smoke break, concealed behind some pillar or window-box shrub, will cause me to hyperventilate periodically for up to a week post-encounter, this mask has turned my life around. Sure, it takes a bit of getting used to, walking flamboyantly down the street like Modern Joe, and sure, people stop me to applaud my commitment to cosplay (which has so far, always been sincere, and highly amusing), but it has been the single greatest boon to my respiratory health and peace of mind in the course of my life. It has opened up avenues for travel - I can now go to countries where smoking is very prevalent, so long as I enter nonsmoking indoor establishments for lodging/eating/etc. and even though one certainly isn't anonymous or subtle with this accessory, the functionality (safely breathing, anywhere) is unbeatable. A bit of odor does come through the mask, from time to time. I know when someone is smoking nearby, because I can smell it through the mask. However, it's an odd scent, quite distinguishable from the unmasked, unfiltered odor of smoked tobacco. It's not a pleasant scent, but it is a breathable one, nonetheless. The only time the odor through the mask was very strong was in the case of painting with aerosol. I couldn't distinguish between the filtered and unfiltered odor of spraypaint. Nonetheless, I had no breathing issues during or afterward, so I suppose the mask did its job. In terms of fit - everyone's face is different, sure, but I can vouch for the fit on my face at least. I ordered the large/medium, though the small/medium was tempting. I'm a fairly petite girl with a narrow, oval face and this size fits me quite well, leaving no gaps. It sometimes pops a little when I'm breathing heavily - I'm not sure what causes that, but it doesn't seem to be letting air through when this happens, so it's more distracting than problematic. I've done some aerobics in this mask before, and the passage of air is sufficient to allow me to comfortably breathe, even when my respiration is fairly accelerated. When hyperventilating on a cold clear day, this mask has helped normalize my breathing - I believe this is because it heats up and moistens the air somewhat? But I'm not sure if that's the case. I live in a cold climate. Not sure if this would be bearable in the desert - or in a particularly warm climate. The airflow is sufficient to keep it from getting muggy and sweaty during a Pacific Northwest summer, but things might get uncomfortable if it were any warmer. That said, this mask is by far the best option I've found to date. Haven't replaced the filters yet - so I can't say whether or not that's a turnkey process. Lost the first mask, and had to buy a replacement. Both were top notch quality and equally functional.

Very effective and comfortable, even for long term use. The exhalation valve works really well (my glasses never fog up), and it doesn't feel too hot or sweaty even when working on warm days.

good quality. works well. fit me.

I got this mask to replace the 3M N100 that I've been using. Unfortunately none of the 3M disposable respirators seem to be made for medium/large faces - I'm constantly fiddling with them as they shift position while wearing (have tried N95, N99, and N100, same problem with all of them). By comparison the Elipse is a huge improvement. I bought the med/lg size and it fits very well, seals completely, doesn't shift in use. The only problem, and the reason for a 4 instead of 5 rating, is that the plastic construction causes condensation to gather inside the mask (I've been using it outdoors in 50 degree weather fwiw). On the plus side, it's super easy to dis-assemble and re-assemble the mask, which I do occasionally to clean and fully dry it. It's worth the trouble to get the comfort and filtering that the mask offers.

i have been using the GVS SPR457 Elipse P100 Half Mask Respirator for about 2 months now. I am a welder and i also have asthma. i work in small shop making safes, welding for 8 hours a day 7 days a week can really put a toll on your body. you are constantly breathing in toxic fumes that you can clearly see the side effects of at the end of the day ie. black mucus in my nostrils and throat. this respirator worked perfectly for me because i needed something small and compact enough to fit under my welding hood but efficient enough to actually be worth wearing. i am constantly moving around going inside safes (some of which only my head fits) and i rarely even realize that i am wearing this respirator. it fits snug of your face and it is super comfortable. the respirator is never obtrusive and if need be easily removable with only one hand, you can pull the top strap and let it hang around your neck until it is needed again. best of all my sinuses are clean and clear and under control pros: lightweight yet durable easy to put on and remove does not restrict breathing easy to clean and change filters compact design gives it great versatility cons: on cold days or if working hard moisture can build up on inside requiring you to wipe it away straps do tend to get loose after a while, just make sure they are tight your voice will get muffled especially in loud environments requiring you to pull on mask to be heard properly overall the versatility of the GVS SPR457 Elipse P100 Half Mask Respirator is unparalleled whether you need it for light duty home work or for more demanding daily work it will fit your needs. there to protect you when you need it and out of the way when you don't.

Yeah, this seems expensive for a mask, when you can just get a bunch of N95 dust masks - but I'm here to tell you this product works WAY better! You can actually breath effortlessly, much better than a cloth mask. I used these when dry-cutting stone (tons of fine dust), and they worked great. Very happy overall.

If you have a well defined jaw, this P457 might fit; however if you have a small chin, the P100 is likely the just-right fit. My head circumference is 22 inches. By far the most comfortable mask ever on my face, & breathing is sooo easy.

great product

I recently purchased this face mask for sanding drywall, and I couldn't be more impressed with its performance. Not only does it look sleek and stylish, but the filters also work exceptionally well. After an hour of intense sanding, I didn't feel affected at all, thanks to its excellent filtration capabilities. What sets this mask apart is its incredibly light weight (only 130g) and perfect fit to the contours of the face, ensuring maximum comfort without hindering movement. One of the standout features of this mask is its unique and low-profile filter design, which provides an unobstructed field of vision. This feature is especially crucial for tasks like sanding, where visibility is essential for precision work. Additionally, the low breathing resistance of the mask reduces the risk of user fatigue, allowing for extended periods of wear without discomfort. The pleated HEPA filters further enhance comfort while ensuring high filtration efficiency. I highly recommend this face mask to anyone in need of reliable respiratory protection. Its NIOSH approval (TC-84A-6949) assures its quality and effectiveness. Made from hypoallergenic materials and featuring an easy-to-adjust headband, it's suitable for long-term use without causing irritation. Whether you're working on DIY projects at home or in a professional setting, this mask is a must-have for safety and comfort.

Buena mascarilla hace su función es muy cómoda y no estorba al momento que te pones la careta para soldar.

Muy cómodo, lo uso casi todo el día para soldar y esmerilar. No sé empaña la careta ni los lentes de seguridad y queda bien con las caretas ya sea de soldad o de seguridad.

Probably the best mask out there. Comfortable and easy to clean. Bought a few for my self and crew.