ComStar Copper Lock, 2 oz, Liquid Solder for Copper & Brass Pipes - Permanent Pinhole Leak Fix & Pipe Repair - No Heat, No Torch Plumbing Adhesive - High Pressure HVAC Sealant Up to 500 PSI (10-800)

Wow! This worked great. A friend of mine said it wouldn’t work, but I had a rusted leaking receiver drier on my old R-22 system, I cut it out and replaced with a new one and used this to reconnect it and no leaks, system has been performing great for 6 months now. Even more impressive is that this is close to the condenser and gets a lot of vibration and it’s holding up great

I replaced my gas water heater and needed to reattach the copper overflow pipe from the pressure release valve. I don’t have experience with copper solder so this was a great alternative. Very easy to use and appears to be a solid bond. I honestly don’t know if I would trust it if the copper pipe was under constant water pressure but for my application it is perfect. If the pressure relief valve pops and water flows into the overflow pipe I am having a bad day and it isn’t going to matter if the pipe leaks a little!

Great product. Life saver.

This creates a seal within copper fittings-- aka pipes into couplers. Works like a champ for connection copper water lines without soldering. It will not adhere brass to brass. It is not a glue, rather it is a seal that forms after setting. That is the only reason I didn't give it 5 stars.

Holy smokes! Is it glue or soldering? No torch, no heat, it can say soldering on the package all it wants, but it really looks to be just glue. But WHO CARES; it worked like a charm! Tried this because I was working on a gas boiler... it did the trick, has been holding approx 20psi and no sign of leaks - I don't think I'll go back to the torch unless forced.

not working as promised. I used it on copper. but did not work.

Had very good luck using this for capping off a copper pipe, also worked on couplers just remember if you have even the slightest bit of water touch this stuff game over as it “will” leak although with a little heat the fittings come right off. The best thing about this for me was using it to glue a chrome plated copper drain line to the inside of the main copper line, as those who know the chrome plated copper is slightly smaller in diameter than the inside diameter of the standard copper pipe, once all of the connections are made I simply drip copper lock in the small gap between the two pipes, tried it first with 2 scrap pieces to make sure it works as I do not want sewer vent gasses coming into the house, honey what’s that smell!

Telling you what as in for not leaking and Fast clean hold.. This stuff is amazing .. bending the pipe back and forth under pressure yeah it will break but any mechanic and plumber knows compare it too locktight if you twist it enough or bend it it will break loose but a copper pipe in the wall or for a fix its as good as solder its amazing actually i never believed it would work... for the price and the big bottle you can do allot allot of pipe repairs for allot less money for solder and Map gas so a better value for the money for sure

Pegamento fuerte y fácil de usar, resultó mejor de lo que esperaba.

Pour tous ceux qui ne sont pas capable de souder ou d'installer des tuyaux de cuivre dans des espaces très restreint, ce produit est dispensable.

My 2008 Yukon had one read defog tab ripped off. I tried a product from a store specifically to 'glue' it on - no good - completely disappointed. I used this in with a piece of copper tape which I got on amazon. The copper tape is conductive on both sides - yes - including the sticky side. Clean the area on the window so there is no dirt. I used a 1.5" long piece of conductive copper tape and taped it over the area on the glass where the tab is supposed to go. Rub the tape firmly on the window. Then, I used this product to 'glue' the tab to the copper tape I put put on the window. Prepare the tab by sanding it so it is shiny copper. I poured a thin layer of the red liquid on the back of the tab and placed it in place on the copper tape. Apply good pressure for 2 whole minutes AND DON'T MOVE IT. It stuck. I let it be for 10 minutes and then gently and carefully placed the electrical connected on the tab. I turned on the rear defog switch and used a multi-meter to determine there was voltage on the window. There was..and it works. It's too bad that they don't sell a smaller bottle. I only used about 15 drops in total. Good luck to you.

Very good product

Replacing an evaporator inside a residential refrigerator