OPT7 12pcs Motorcycle LED Strip Lights with App & Remote Control, RGB Multicolor & Sound Sync Neon Accent Bike Underglow Lighting Kit, 12V Switch for Harley Honda Yamaha Kawasaki

I have installed this kit three times on three bikes, and removed it from one bike to transfer to my new one. Removed it after a year and it was actually hard to take it off and remove the heat shrink on the connectors. Never had any problems with them over the year, aside from my seat being too far from where I wanted the switch mounted. The adhesive held very well and the connectors didn't come apart at all. My one gripe is that there are no "end pieces". All the 5.5" light strips have open ends on both sides to allow them to be run in sequence. Very nice, until you get to the end of one of the lines you want to run. I ended up having to buy the long strips from this same company because they terminate with a waterproof cap on one end, allowing for the whole line to be contained. Not the biggest problem, but something to be aware of. On the third install I also noticed that my buddy's remote will control the kit on my bike, as well as his, and I assume any other bike with this kit on it. It would be nice to see each one operate on its own frequency. Though maybe we just got "lucky" with what channels ours works on. Also not a real "problem", just a minor inconvenience. Lastly, with these being RGB LEDs it should be possible for the colors to be any color of the rainbow, but you are stuck with the 12 colors on the remote and white. Allowing us more freedom on the remote would be really cool, or through an app of some kind. The remote also has strobe, fade, and brightness settings. The rate of each can be adjusted between what seems like 10 or so speed settings, so a lot of options with it. I haven't used the key fob remote, as I don't want to ding up my tank with it, so it sits in the box the lights came with. The kit also comes with all the connectors, extensions, shrink tube, and zip ties you will ever need. The second one I bought seemed to have less shrink tube in it, so maybe they are giving less now, but it was enough to finish the job, with a few mess ups that had to be removed. The first kit I bought had enough to do the whole job twice with some to spare. All in all, I would recommend this kit to anyone that wants to light up their bike for whatever reason. The little extra this kit costs is 110% worth it for the quality you get.

These LED's are fantastic! They have awesome color. The brightness is superb, they can even be seen during the twilight hours. For my application I have 2002 Harley FXD. The install was a breeze. I used painters tape to hold the LED modules in place for testing before I permanently set them. The remote is handy for setting the color, Brightness, and the speed of the strobe effect, but that is all I used it for. I just set mine to one color and use the on off switch to toggle the system on. I absolutely love how good they look on my bike. Now here is where this company excels. I bought the LED's in April and in August they failed. I checked all the voltages and replaced the fuse and it still did not work. I knew that there was a warranty but I was not able to find out how to make a claim. I finally made contact with the company and they were ready and willing to help resolve the problem. I emailed them a video of the problem and BOOM! I had replacement parts in the mail. I installed them and my lights are back on again. I cant express how happy I am with these LED's. IMHO

This is the second set of motorcycle LEDs that I bought from them. They're always awesome. Easy to install and they look great and last.

Purchased for my vintage CBR600F1. The whole kit took about 45 minutes to install, and that was me taking my sweet time. The 3M tape appears as though it would hold for a lifetime, but I live in Florida and adhesives don't hold up well here, so I used zip-ties as well just to be certain. Looks great, lots of color options and love adjusting strobe speed. One thing that can be considered an upside or a downside is that if your friend has the same kit, the remote will also change their bikes lights if they're within 20-30 feet of you. I personally thought this was hilarious to change my color to hot pink, drop back 50 feet and switch my bike back to blue, my friend did not find it as funny. The only glaring flaw that kept me from putting 5 stars is the included on/off switch, it stopped functioning and I had to purchase another switch at the hardware store. The rest of the kit is very high quality, so it boggles the mind that they went cheap on the power switch, but it was an easy fix so it still gets 4 stars.

This is a FANTASTIC LED kit for any motorcycle. The quality is excellent and value for the money is superb. The two remotes are great and give you tons of control over the lights. My only gripe is that the sound control portion doesn't work for me, even after a replacement of the main module. One thing to note is that IF you do have any problems, the customer service with these folks is EXCELLENT. Simply can't ask for more and you won't find a better value at this price. [UPDATE 5-10-16] I've had this kit just over a year. So far it's been great, then suddenly the wallet sized remote has stopped working. Been emailing with customer service back and forth and it seems they have a robot or significantly under-qualified person on the other end of the emails. Their recommendations were completely useless and they just kept telling me to change the battery. <sigh> Since the unit is literally a hair over a year old, they will not warranty the remote. Knocking down from 5 to 3 stars to one for crappy customer service. Their solution is for me to buy an entirely new kit...apparently you can't buy a new remote.

I originally bought 1 kit of 10 installed them and they looked great. I was loving the look. I received several compliments on the bike due to the lights. Then I decided to buy another kit and as it to the bike as well. I un- installed the 10 original lights cleaned them up put new 3m tape on them. I laid out where I wanted the lights and started from the controller and worked my way out. It took me ruffly 4 hours but then end results is great. I’m extreme happy with how it turned out. Note to everyone make sure you clean the area good will denatured alcohol before placing your lights heat shrink the connections , electrical tape something to make the water proof

First off, let me discuss the shipping. This product arrived in less then 3 days. It shipped from California and I live in Oklahoma, which is a heck of a lot faster then most things reach me. The lights were well packaged and neatly placed in individual boxes to keep everything together. Have zero complaints on shipping. Second I'll discuss the lights themselves. I'll be honest, for the price I was really sketched out on just how well they would function and look but they turned out way beyond my expectations! I took a great deal of time figuring out just how I wanted the lights positioned and what I wanted the glow affect on. I set it up just the way I wanted as I have never seen a led kit that was so user friendly and convientant. I have installed LED floor well lights before and it was a nightmare figuring out where and how to tie everything into power and ground. This system is completely plug and play. Which I loved. The control/receiver box also is sound activated which... On my motorcycle doesn't get used at all. But I will be buying another set for my f-150 pickup to replace the static blue ones I have. The remotes that come with this set work flawlessly for me as well too. I used Velcro to attach the large remote under my passenger seat and the smaller less functional remote I keep on my key ring. I will post pictures of my bike here for you to see. And yes... It's in my kitchen due to weather and it was just easier to work on. I have gotten tons of compliments on my bike and like I said, I plan on getting another set for my vehicle. Only complaint I have is that the adhesive strips don't seem sticky enough. Granted I never tried to ride it with just the products adhesive alone... But I just didn't trust it. So I glued and stuck them on with my own product of choice. I simply just applied my adhesive to theirs and stuck It to the bike. I don't worry about residue because due to it being LED... The lights will far outlast my bike in ride time or I'll sell it and it won't matter anyway. This is just a really cheap and awesome way to add some character to your vehicle. I recommend this product 100%. I'll post these pictures now. Thank you, -Bobby

Update: in the last year I've bought four more one-foot strips. After initial installation, it worked great for about four months, then the control box slowly died. First it would turn on just fine, but not change colors. Then, it wouldn't work at all. I went through and ruled out all possibilities, then I contacted the company, they sent a new control module. After installing the new box, it was back to working perfectly. Since they didn't have me send the original back, I opened it up. The cradle for the power supply was cracked- the plastic weak and not built to withstand the vibrating of a motorcycle. Another six months or so later, same exact problem arises. Now my lights aren't working and when I contact the company, they say it has been a year since my initial purchase, so I just need to buy a new one. Original rating: It took me about 2 hours to install properly (figuring out where I wanted everything, running wires, hiding wires, adhering). I didn't use most of the adhesive so I can't say much about it. I just got a pack of black cable ties at the hardware store and mounted most everything with those. The lights are bright and work great. The remotes work great, but I've found that if you turn the lights off with a remote, the switch on the bike won't always work, so I make sure to turn off with the switch every time. I will probably be looking into buying a second kit for my bike, as I feel I need a bit more- it definitely doesn't light the bike up as much as the picture. Overall, very happy with this. Everything was easy and works great, and I've had it out in all kinds of heat and rain. The pictures show the full kit. I have one light strip on the front, one on the luggage rack, one on each side of the fuel tank (I'd like two on either side), and six on the frame (two for each side, one front, one back). I've had a lot of admirers- it is beautiful running at night no matter the color. The kit comes with everything you need except a heat source and tool. I just used an embossing heat gun to seal my connections. Worked like a charm.