icolor Laptop Skin Sticker Decal 12 13 13.3 14 15 15.4 15.6 inch Personalized Universal Notebook Vinyl Skin Stickers Cover Art Decal Computer Protector (070)

I didn't see a review with photos for pattern 61, the pink roses with a blue background, so I hope this helps. I included three photos, the collage one shows my steps. As you can see it comes with an over sized sheet that you trim to fit your laptop and two side panels. I only chose to adhere the full sheet. I really like that it has a grid pattern on the paper as that makes it easier to fit and that it's a nice thick quality. The image is a really nice sharp enough resolution. Luckily, I'm a crafter and had all the tools I needed. It really helps to have a paper trimmer and a corner rounder for sharp cuts. 1. First I used a card to place it over the ends of my laptop and crease it so I knew where to cut. I wanted most of the florals on the left to show so I went all the way on the left side of the pattern and creased on the other three sides. 2. Use a paper trimmer to cut just slightly shorter than your crease marks to allow a border on the side for when applying. If you don't have one, align as close as possible to the nearest grid line just before the crease mark cutting slowly, with sharp scissors. If the label hangs over the ends, it will get jagged with use, so give yourself that border. 3. Use a corner rounder to cut the newly cute angled edge corner to make it a rounded edge to match the laptop. If you don't have a corner rounder, trace the pre cut rounded corner on the cut corner and cute slowly with sharp scissors. 4. I chose to remove the paper slowly in the middle first by tearing and edge and then using the scissors to trim the paper only, not the vinyl, down the middle, and adhere in the center so I would get good placement. If you like how it looks, then remove the paper on the sides after the center was adhered and then I used a card to flatten it out starting on the inside going outwards to the sides. You get less bubbles that way. If it doesn't seem as centered as you like, you can easily lift up and try again. The adhesion is forgiving enough while still maintaining its stickiness. I have had this on my laptop for a month now, with daily use, and it still looks like day one application. I can see myself changing up different patterns for something new, so please keep adding new styles. I would love to see holiday themed ones also.

It’s even prettier in person! It’s very easy to install. I just got it so I don’t know if it’s reusable but it it seems like it would be. The hardest part is making sure there are no air bubbles & that’s bc my hands don’t work well.

If you have ever worked with contact paper you’ll have an easy time with this. The skin is thicker of course but easy to cut and fit in and around your laptop. Adhesion was secure once’s it was smoothed down to my freshly cleaned laptop lid. As for spatula tool; I used a spatula from my kitchen to press out any air bubbles. It was easy. I love the colorful pattern we chose also. This was a great solution for a laptop that was hard to fit. The quality is decent. I would order this medium again. Great solution to keep your surface covered.

Beautiful and vivid option that is of great quality. Neat idea and sticks very well. A bit of adjusting and cutting was required to get it in place properly.

Very pretty laptop skin. I had to cut it to size for my laptop but there were lines giving guidance for where to cut. I hope it lasts a long time.

Love the design, the colors, so much so that I bought a matching mouse pad! The decal seemed good quality when it arrived; the vinyl is durable and washable. However, to get the right fit, the decal itself required cutting, which resulted in somewhat uneven edges. Also, the lid of my laptop has a slight curve at the edges so the edge of the decal keeps lifting and one corner is pretty much non-stick at this point. I rarely take my laptop anywhere other than to other rooms so it does not get slid into a laptop case or anything and still have this problem. Maybe someone with better cutting skills will have less of an issue ;) I just know that for even gentle use, this decal was not sticky enough for my laptop and so I doubt it will stand up to more rigorous use. Not a horrible product, and I might order another one at some point, just not a "5".

Exactly as described. Beautiful picture and easy to remove and place again without losing adhesive or leave behind residue. Easy to trim with the grid on the back.

It arrived in poor condition. All bent up, which of course isn't the fault of the seller. I returned the item for that reason as well as because it was too big for my 13 inch laptop. I love the design, but by the time I'd cut it to size, I'd have lost a lot of the design. I'd recommend it for larger laptops.

super very nice

通販は日々ポチポチとしておりますが、久々に心がときめいたのでレビューします。 傷隠しに安いのでいいやとシー〇ンで数百円のスキンステッカーを初めて購入してみたところ、プリントはボケた感じで筒状に丸まって届いた上に、かなり薄くてシールはめちゃくちゃ強力。貼りにくいこと貼りにくいこと・・・。 数百円で購入したのでその点は想定内でしたが、パソコンが壊れないか不安になりつつ空気が入らないよう何度も貼っては剥がしを繰り返すこと約2時間(⁉)でようやくそれなりに貼れました。(何度も剥がしたせいで一部分は伸びてしまって浮いてしまいました(泣)) どうしても気に入らないので、結局前から気になっていたこちらをポチり。 アマゾンの紙袋から取り出した時点で「わー！！素敵！可愛い！」と、子どもの寝かしつけまで待てずにすぐに作業に取り掛かりました。 筒状ではなく、ちゃんと平らな状態でパッケージされています。 苦労して貼ったものを剥がして型紙として再利用。(シー〇ンで買ったものがかなり役立った(笑)) サクサクハサミでカット。そしてめちゃくちゃ貼りやすい！空気は入りにくいし、貼り直しても伸びない。 トータル30分もかからずに作業終了。前回が激ムズだったので余計簡単に感じました。 しっかりとした素材なので角っこなどの丸み(？)のある部分にはフィットしにくく、フラットな面に合わせてひとまわり小さめに切ると浮かずにうまく貼れると思います。 表面はレザー調で高級感があります。プリントもピンク系の大理石が派手過ぎずモダンでオサレ。 ちなみに17インチですがいけました。 自分からは見えないけど明日から仕事が楽しくなりそうです。

Well made, not quite the quality of a Dbrand wrap but for the cost it is great alternative. While it is intended to go over the top of your laptop I'm using it by cutting out the size of the KB so it goes wound the KB and mousepad of my surface book 3. I am also going to cut one piece that can go over the mouse pad as well and i have already tested and it does not effect the glass high quality touch pad on the surface book 3.

Suitable for my need

جميل جدا