Hold Stable Pressure 0-60 PSI Mini Keg Regulator, No Leaking Portable Cornelius Corny Beer Growler Outdoor Picnic Party Carbonation CO2 Gas Ball Lock Disconnect Mini keg Charger Regulator

Works great, but do not use 24 gram CO2 cartridges, only 16 gram. I use it for forced carbonation and serving hard cider in 3 gal kegs. Works great and fits in my spare fridge nicely. First one failed after a year because (I'm very sure) I used 24g to force carbonate and 16g to store and serve. Switched to only 16g now. Great little units for the price!

The regulator certainly functions, but it isn’t as precise as I had hoped. The adjustment range feels a bit coarse — it seems to jump in roughly 10 PSI increments rather than allowing for fine-tuned control. Because of that, I couldn’t dial it down to my preferred serving pressure of around 5 PSI, which was a bit disappointing. It’s serviceable for general use, but not ideal if you need more nuanced pressure settings.

I used this with a 5-gallon Corny/Cornelius keg that I had filled with commercial beer for a birthday party where alcohol discretion was required. After filling, I purged the keg of oxygen with CO2 and pressurized it to about 20 PSI overnight. The next day, when it was time to serve, I connected this mini regulator, vented the keg down to around 8 PSI, then slowly increased pressure until the needle just passed 8 PSI before backing it off slightly. (I found 8–10 PSI to be the sweet spot to minimize foam.) The regulator performed flawlessly throughout the entire event. We dispensed about 4.5 gallons of beer using only three or four 16g food-safe CO2 canisters, also purchased on Amazon. While there’s some initial setup involved, once dialed in, I found the regulator reliable and convenient. It saved me the hassle of lugging around a full-size CO2 tank and kept things nice and discrete. To proactively prevent any leaks, I removed all fittings and wrapped them in thread-sealing tape- highly recommended for peace of mind.

The construction on this item is exceptional. It comes with all the needed attractions and attachments. The valve assembly regulator is well-made. It can meter the pressure down to five psi which is what I used to deliver beer out of a Corny keg. In the future, it is a back up CO2 source that I will have on all of our kegerators in the future.

This regulator is the best for use with small CO2 cylinders. It works well and according to the description. I ordered a nd used more of them, but not beer. I use it for a medical device, and I am very happy with it.

Works great. It seems a bit fragile to me, but has worked flawlessly for 10 gal of beer. I’m just very careful. No leaks after connecting 6 CO2 mini bottles.

Works great easy to put together and great product for the price fits my corny keg tap perfectly.

These things are unreliable. I use them to gauge pressure in sacrificial bottles for brewing to know when to pasteurize my batch. There seems to always be something wrong with them, I have two. One leaks pressure, so I have no idea how much PSI is in a whole 5gal batch of bottles, and the other gauge just lost pressure after I manipulated the attachment slightly. Terrible product.