Mediasonic PROBOX 4 Bay DAS 3.5” SATA Hard Drive Enclosure – USB 3.0 eSATA Support 30TB HDD (HF2-SU3S3)

This mediasonic probox 4 bay enclosure is exactly what I needed! I have two 14TB Seagate exos X16 enterprise HDDs in it hooked up to my PC using eSATA VIA a 10Gtek eSATA to PCie card (also purchased here on Amazon) and it works great! I did install and update the 10Gtek driver before I hooked the mediasonic enclosure to my computer. The drivers for the 10Gtek card is no where to be found if you search for 10Gtek drives BUT this card is based on the ASMedia ASM1061 chip so I went to ASMedias websites and found the driver there. Once that driver was installed, I hooked the mediasonic probox enclosure up and turned it on and windows 11 recognized both my drives with no issues! For me, It was easy to open and install the drives. Yes, as mentioned by others here, the front blue lights are bright when its on but it doesn't bother me because I have it under my desk where its not really visible and plus I don't leave it on all the time. I only turn it on when I have to make a backup of something. I have the fan on high because fan noise doesn't bother me, plus all I'll about keeping components as cool as possible. On high, yes it is very noticeable but on medium, it is barely audible to me from about 3 feet away where it sits. And speaking cooling, it does a good job of keeping my drives cool. At Idle, according to crystaldiskinfo, they sit at about 34c-36c. I copied 4 TB of data to both drives and even copying for 10+ hours straight, neither drive got above 45C. I should mention I copied data to one drive at a time and not simultaneously so I can't speak to how the the temps would be doing more then one at time. Copy time was as I expected for 7200RPM drives in the range of 60MB/s to 220MB/s with an average of about 80MBs-110MB/s. I had a lot of very small files in the transfer so speeds where up and down. I am also using a 6FT eSATA cable and no issues with that length. I have not used USB nor do I plan on it so I can't speak to how that performs but I'm sure its good. I had read that eSATA can be a little more reliable and stable when transferring large amounts of data at a time so since I had planned on moving 4+ TB at a time, I specially went with eSATA. So far, I'm more then pleased with purchasing the mediasonic probox enclosure and will definitely purchase another one if I ever need another in the future!

I add my voice to the small group who think that a drive activity indicator does not need to be bright enough to read the fine print in a EULA. There is a six-inch piece of black electrical tape in the future of my ProBox. The unit came with a map-fold sheet labeled 'Quick Installation Guide' on the front, and a 'Thank You' note. Both had different web links that offered a manual. I could not make either of these links work. When I came to write this review I discovered a bullet in the 'About This Item' section that offered a link to a manual. After scrolling up and down the page for a while I found the link rendered in the smallest type, just where the bullet said it would be. This link worked for me and led to a PDF version of the same map-fold sheet that came with the unit. In spite of what it says on the front, that sheet apparently is the manual. As such it offers pretty good graphics with mediocre and obviously translated accompanying text. The most glaring fault is the total absence of technical specifications. It does have enough information to get the unit set up and running. One of the things you may need the manual for is how to get the unit open. It features a unique set of molded plastic latches, one for the hinged front panel (which comes off when you open it) and a different style set-of-two to remove the plate that holds the drives in their bays. These appear fairly sturdy but I wonder about their longevity in the warm environment. Fortunately they don't appear to be necessary for the operation of the unit. As a person with experience using external drive enclosures I found the setup reasonably easy. The unit and all drives were immediately recognized by my eSATA I/O card and have run seamlessly for about a week. I am not a fan of power bricks and this one looks particularly vexing because it uses a right-angle connector to plug into the side of the unit at the back. This means you can't put that side up against anything or have two units side-by-side without a gap. I read some comments about overheating. I have not experienced this. I loaded the ProBox with four 7200RPM terabyte-sized drives and set it to a multi-hour backup task. I never saw temperatures in excess of 41°C. It didn't even ramp up the automatic fans. In any case there is a manual fan control that can turn them up to a dull roar. I used eSATA to hook the ProBox to my MacPro and discovered I had to disable the automatic shut-off feature because it would not wake when the computer came out of sleep mode. This might work better with a newer computer or over USB. This isn't a big power-waster because the computer system spins down the drives in sleep mode. I found the operation of some of the front panel push buttons less than intuitive. To change the interface mode you must hold the button for several seconds. To power the unit on you push and release the power button. To power it off you must push and hold the power button. Bottom Line: In spite of some quirky design choices, overall this appears to be a reasonably well constructed unit at an attractive price. I liked the first one well enough I ordered another.

I highly recommend this enclosure

I got my original boxes that were USB 2.0 and eSATA and have used them non-stop for over 10 years... they are simple to use but required a esata card with port multiplier to use, which made them a bit complicated to set up. The only situation I had for all those years was a power supply for one that died and had to be replaced. When COVID hit, one of the boxes died and I replaced it with a newer esata/USB 3.0 model but it was used as all new stock were impossible to find. And 2 years later, that is the box that has now died on me, but it is possible that it's due to power surges and such as these last few months, the city has had a lot of problems due to many storms and such, and it may have also damaged my UPS that should have prevented damage to my devices including these boxes... I'll never know. But that said, this box is replacing that other one (and is the exact same) and I will hope that it will last as long as my other older boxes that are still going strong so far. These boxes are simple to use, with only one annoyance of needing a small handle to be installed on the drives. The fans are very silent and aside the situation that requires me to get a replacement, have been very solid and working very well for a lot of year. In time I will most probably need to replace them for a more modern setup as the old boxes are supposedly limited to 4TB drives (while the newer ones are able to use much larger drives) and will switch to USB 3.0 (or better) and leave the eSATA in the past so to prevent the headaches I've had due to that. I almost went with the 8-bay boxes, but reviews have been alarming in reference to the number of issues that people have had compared to the 4-bay ones, so I'll have to see when the time comes. But for now, these boxes have been great, have been through constant use (24/7) and I've enjoyed them greatly, and for a price range that left all competition far behind.

Bought this to house 4x SATA drives from a broken PC. Really easy to assemble and place the drives, and no problems accessing them once seated. Intructions are fairly idiot-proof as well.

Works well as a JBOD, good data transfer speed. Front cover is held down by a flimsy plastic catch the broke on the second opening.

The blinken lights I find a bit too bright, especially the drive access ones as they flash quite brightly on and off a bunch. The set up was quite reasonable. The instructions were clear enough and the process only required the use of the included and rather cool little screwdriver for the drive brackets. I fell one could get by without screwing them on but YMMV. The actual plug in and access to the drives was as painless as anything i have experienced in the past 25 years. Speeds seem to be right. I am seeing the expected SATA 3.0 speeds I would be getting over a native SATA port and cabling. I also found the cabinet's construction to be much sturdier than expected. The internal plate that covers the drives and acts as a brace being a solid metal piece was a welcome surprise. The unit itself is sold and doesn't feel cheap.The case front and its plastic could have been better but it is adequate for its purpose. I had a coupon and an Amazon Rewards voucher so my cost was less than the price shown. Would buy another.