SSD Enclosure, Tool-Free USB C External, 10Gbps M.2 NVMe to USB Adapter/Reader Supports M and B&M Keys and Size 2230/2242 /2260/2280 SSDs

I bought this enclosure and I’m really impressed. Installing the drive was completely tool-free and straightforward, thanks to the simple sliding design. The aluminum shell is lightweight and not burdensome. Once I plugged it in via USB-C, it was instantly recognized (no drivers required) Solid build quality and good cooling thanks to the aluminum body and thermal pad. Broad compatibility: worked with my Windows PC, and also tested on a Mac without a hitch.

Works like you expect. Nice enclosure that saves you from holding on to that old drive from a deceased laptop. Now we have mondo storage for videos on the tv. Sturdy, light and easy to load.

Get this over the SSK, seriously. They cost the same. This one is actually USB3 10Gbps, whereas the SSK runs at USB2 but claims USB3. My cheapo NVMe drive in this UGREEN adapter gets over 900MB/s. It's also very easy to insert the drive, with a little rotatable rubber nub holding it in place.

perfect product, the "screw" it comes with to keep the SSD down was a joke but it works perfectly nonetheless, its been sitting out of sight holding my games for a while now its worth it for 15$ or wtv i paid.

Love this thing. Works quickly to allow me to flash whatever is necessary onto the SSD. Plus-and-play usage is excellent, acting the same as any other drive plugged into a USB. The plastic "screw" to hold in the drive is a little tough but I am a larger person with big hands, so it was a little expected. Overall, excellent quality.

UGreen usually has great products and this is no exception. Easy to install the SDD and it works as advertise. I like the rubber protection, but who knows how effective it would be, I'm not going to test that for y'all. I have purchased a few as backup devices for work, they work great. Too bad NVME drives have gone thru the roof lately.

This enclosure is slightly bigger than a full-length nmve SSD, so reasonably sized. This makes it easily portable. There are no screws, but at the same time, the mechanism to open it and get the SSD in/out is pretty flimsy. I'm talking about the enclosure, not the hold downs for the SSD itself. It uses twist style capture locks for the SSD, which were great. I didn't test the speed transfer, but it was except able and comparable to other devices. I'm using an older USB 3 hub, not a 3.1 or 3.2 hub. So, for me it was fast enough. All in all, this was a functional enclosure. I bought it for a particular purpose which I ended up not needing it for, but still used it for some data transfers. It worked great for that purpose. The biggest challenge was actually getting the SSD into the M2 slot. It's tight and required more effort than I'm used to.

It works, but I had to come back to this listing to figure it out. 1st: I bought a similar enclosure before this from ssk, and everything worked out of the box. 2nd: in a way, this one worked out of the box, except I would have had to reinstall the nugget pin that held in the drive, and would have had to replace the heatsink after having to open it and handle it. ********3rd VERY IMPORTANT: Though this wasn’t the case for my ssk enclosure, with this enclosure you must format the drive before windows recognizes it as a drive****** I went through a lot of troubleshooting before realizing that it was perfectly fine that when I plugged in the enclosure to my computer, the ssd didn’t show up as a drive. I’m sticking it on a raspberry pi. The raspberry pi image creator had no trouble seeing the drive as a drive I might want to flash raspberry pi os to. I immediately was able to write the image and format the drive. The problem was that I expected windows to call it D: or E:, and it didn’t. I figured there was something wrong. There wasn’t. While there are special instructions about this in the Amazon listing at the end of the description, it cost me a lot of time. Also, the tool less design isn’t solid. It realize on a little nugget that you push through a hole on the frame of the enclosure. It failed the first time I tried it, I think because the thermal pad got snagged on it and it came out of the mounting hole. Because of that I ended up dropping the thermal pad and possibly ruining it. …. I’m going with three stars not 4. On the other hand I do believe it’s working fine now. I have replacement pads coming in the mail. I’d rather have a little screw. Tool less makes it sound easier, but it wasn’t for me. I’d much rather use a mounting screw that I can count on than a nugget pin that I can’t. I hope the enclosure works well from here on out, but the ssk with a mounting screw is much better than this tool free enclosure. Yes, being that I’m replacing the thermal pad, I think a loss of 2 stars is warranted. If you’re comfortable with everything I mentioned, this could be a five star enclosure, but it obviously was a huge pain my first time around.

J’ai utilisé ce boîtier UGREEN pour transformer un SSD M.2 en disque externe après une mise à jour de ma config. Mon usage principal a été le transfert d’environ 300 Go de données de jeux + quelques fichiers depuis un WD SN750 NVMe. L’installation est ultra simple : c’est du plug & play. Le SSD s’insère sans effort, le capot se referme facilement, et c’est directement utilisable. Le boîtier est compact, léger, bien fini, la coque inspire confiance. Bref, du UGREEN. Les transferts ont été très rapides. Je ne peux pas donner un temps exact, mais j’ai lancé le transfert, été me faire un café et en revenant (environ 15 minutes plus tard) tout était terminé. Pour un boîtier externe je trouve que c’est largement suffisant. Évidemment, on ne peut pas comparer avec la vitesse du SSD directement monté sur la carte mère, mais ce n’est pas son rôle. En SSD externe secondaire, c’est parfait, surtout au prix. J'aurais tout de même un point de vigilance concernant le petit pad thermique à placer entre le SSD et le boîtier. Si vous changez souvent de SSD pour en lire plusieurs au fil du temps, j’ai un doute sur sa durabilité et je ne sais pas s’il est facile à remplacer. Autre point à noter, au vu de l’espace interne, le boîtier ne semble pas compatible avec les SSD équipés d’un dissipateur. Depuis, je l’utilise comme une “grosse clé USB” pour transférer rapidement des données entre PC. En résumé : pour l’usage que j’en fais, ce boîtier fait parfaitement le job. Si vous cherchez une solution simple et efficace pour utiliser un SSD NVMe en externe sans prise de tête, c’est un très bon choix.

Antes de abrir el impecable embalaje, algo ya te anuncia que vas a encontrar un buen artículo. Todos los componentes (cables, carcasa y protector) en su bolsa correspondiente, inmaculadamente sellada. Una vez en la mano presenta un peso y una consistencia que asegura un perfecto alojamiento para tu disco M.2. Un escueto y sencillo manual, en español, te facilita el elemental montaje. Conexión firme en todos los contactos, interno y del cableado externo. La estética, en tonos azulados oscuros, discreta y elegante. Se acompaña de una especie de colchón disipador elástico adhesivo, de instalación interna para el disco, que te asegura que una posible sobreelevación de la temperatura del disco no será un problema. Ugreen para ni siempre ha sido una marca de calidad y confianza y, con este artículo lo confirma. Compraré alguno más, en un futuro próximo.

I recently purchased the UGREEN M.2 NVMe SSD Enclosure Adapter, and it has been an excellent addition to my tech setup. This enclosure is perfect for anyone looking to convert their internal SSD into a high-speed external drive. Pros: High-Speed Performance: With support for 10Gbps USB C 3.2 Gen2, this enclosure offers impressive transfer speeds, making it ideal for tasks that require fast data access and transfer. Tool-Free Installation: The tool-free design makes it incredibly easy to install your SSD. Simply slide the SSD into the enclosure, and you're ready to go. This feature is especially convenient for those who frequently swap out drives. Wide Compatibility: The enclosure supports both M and B&M keys and various SSD sizes (2230, 2242, 2260, 2280), ensuring compatibility with a wide range of SSDs. Durable Design: Made from high-quality materials, the enclosure is sturdy and built to last. The sleek grey finish adds a touch of elegance to your tech accessories. Thunderbolt 3 Compatible: The enclosure is compatible with Thunderbolt 3, providing even greater versatility and performance for users with Thunderbolt-enabled devices. Cons: Price: It is slightly more expensive than some basic enclosures, but the added features and performance justify the investment. Plastic Components: While the overall build quality is good, some users might prefer an all-metal construction for added durability. Overall, the UGREEN M.2 NVMe SSD Enclosure Adapter is an excellent investment for anyone looking to enhance their storage solutions. Its combination of high-speed performance, tool-free installation, and wide compatibility makes it a standout product in its category.

Buen dispositivo, solo los retenedores de los ssd son frágiles aunque sean de caucho se deterioren fácilmente

Very good product