GSI Outdoors Glass PercView Top , 1.4 inch

Yes glassview doesn't fit you have to take some steps to make it fit. It's pretty simple. But once you do this you still can't tighten it down while the coffee is percolating or cooling down. I first performed a tempering process. I place the glass top on a silicone pad that I had placed on a sheet pan. Placing the pan in a cool oven along with the glass top. Letting the oven heat up to 450 degrees. I did this while baking chicken about 45 minutes as to not waste the energy during this process. The most important process is the glass top stays in the oven until it is completely cool cannot be removed very important. I repeated this three times yes it seems like a lot of work this will help relieve some of the tensions inside the glass. This is a primitive process for tempering glass. It still doesn't mean it won't break. But once you do this you still can't tighten it down while the coffee is percolating. I'll give you instructions on how to do that. But once you do this you still can't tighten it down while the coffee is percolating.did not design this for this pot. This is only for cone (conical) shaped outdoor version (/ \). Here's the simple version pick some sandpaper and sand out the whole to make it larger. If the holes not big enough on the coffee pot expands at a different rate than the glass top it will crack. But more so than not it will crack during the cooling process if it's too tight.please keep in mind that no matter what you do it may still crack. This could happen on the first use or a use 10 years from now. So you need to make the whole a little larger than necessary so there's wiggle room. I use the rotary tool method with sandpaper attachment and a fine grinder attachment to smooth it out. Making a hole about 1/16 of an inch larger than it needed to be. This was the first time I use a rotary tool ever I was very careful so not to damage the coffee pot or injure myself. Always read the instruction booklet. Keep in mind while it's percolating it might tighten itself up. When you pull this percolator off the burner make sure it's loose. Leave it on the stove until it's completely cool do not put it in water do not take it off the stove. Most of all don't drop it. If this is cold before it starts percolating it will crack Another good train of thought never put a percolator in a sink and leave it there with other dishes pots and pans it will surely Bend or break some part of it. Always wash it after it has cooled down set aside to drain and air dry.

fits perfect

I preferred a glass top to the plastic top that came with the GSI 3-cup percolator and I also read accounts of the plastic top melting. As soon as I pressed the new glass top to the hole in the percolator lid to thread it in, the glass crumbled. After examining the top more closely it became clear that the glass top would NOT fit the 3-cup percolator regardless of the crumbling issue. Between the danger of someone ingesting glass and the top not fitting (even though the description states "Fits all GSI Outdoors conical shaped percolators" and "a universal replacement top for all GSI brand coffee percolators") this glass top is too large for the 3-cup percolator. GSI should pull this item before it damages their reputation. It appears we will have to stick with the plastic cap or purchase a different brand percolator.

This product is meant to replace a glass per top that came with my coffee pot. Comparing them side by side the original has sharp crisp lines; the corkscrew inclines are thin with the right amount of steepness to actually screw into pot lid. The replacement looks like it was made from a mold of the original and the lines are thicker, softer, not precise and somewhat ill-fitting. In reality it is off by millimeters- but it doesn't quite fit. So I resorted to making the metal opening of the pot fit this wonky replacement with my jewelry making tools. It took an hour and now it fits. You can get all manner of plastic ones to fit, but if you insist on glass as I do, prepare to become crafty with it. Stars were deducted for the production quality, lack of perfect fit, etc.

I had a Bass Pro outdoor coffee pot, it has cheap plastic cap, but the stainless was way best one. When this plastic cap wear off and stains on it, I had to look for a new cap and I think glass cap would be better, when I order it and the first one come into broke pieces, they send other one, and I try it on, it doesn't fit, it is like really fraction, I just give up and have not think of other things for a while, but then, I got idea, maybe I can use a file or a grind to rub some of it off, but I find better way, I just have to find a 3/4 pcv and buy 400 and 800 grit steel sandpaper, then wrap it round on pcv.. Then I work through on it run all around and finished all, make sure no sharp edge, then try to fit it again and it FIT! I am glad it fit! After while use it, I was worrying about developing rust on rim, but no rust... You can do it, if it does not fit your coffee pot and it look like very fraction fit, just rub it off with 3/4 pcv and sandpaper... You will be happy...

This is good percolator top but it has to be GSI outdoors brand if it’s not it won’t fit on the top. Overall it’s good and it’s hard plastic it won’t break easily

Great to have an old timey glass top percolator. Smells so good brewing. Top was a little large but a twerk here and there on the coffee pot and it actually fits better than the original plastic top. Love this!

Lo recomiendo!! Es de vidrio es resistente al calor y claramente puedes ver cuando el cafe ya esta en su punto, enrosca perfectamente, inicialmente mi cafetera tenia uno de plastico pero se derritio por el calor de la fogata, ahora puedo disfrutar de un delicioso cafe sin problemas.

Excelente materiales recistentes

Absolutely will not fit the GSI Glacier Stainless Steel camping 12 cup percolator I purchased in August 2020. Neck of the glass is a larger diameter than the hole + the thread is different to that of the acrylic perc top that came with the percolator. Pointless to try to force a fit otherwise you'll end up with a bent perc and broken glass. Don't even try it. Very disappointed, given that this item as it is supposed to be a universal top made by the same company that made my percolator! Suspect this is why they don't fit glass as standard on these Percs.

A pesar de que me lo voy a quedar, muy a duras penas he conseguido que entrase en el agujero y a costa de cargarme un poco el esmalte de la cafetera. El que viene de serie no ajusta del todo y tuve que ponerle una junta de goma, con lo cual parece que va algo mejor. Este es de cristal, mejor que el que trae (que no se por que, no los ponen todos de cristal aunque hubiera una pequeña diferencia de precio) Mi cafetera es GSI Outdoors pero este articulo, para nada ajusta como es debido, suave y sin percances. Luego con el miedo de que se rompa al forzarlo al ser de cristal. Lo dicho, me lo quedare porque no son faciles de encontrar y guardare el de origen por si tuviera algun percance; pero lo dicho, si lo se, no lo compro.

Remplacement du bouchon du percolateur. Attention, soucis d'adaptation: le pas de vis est différent de l'original.

Dieser Deckel für Outdoor-Percolatoren ist aus Glas gefertigt, so wie es sein soll. Dank der Angabe des Lochdurchmessers, passt er auch perfekt für den Percolator eines anderen Herstellers! Das Loch für den Stopfen muß 29mm haben und aus relativ dünnem Edelstahl bestehen, dann kann man mit etwas Geduld den Anfang des Gewindes finden und das Ding passt bombenfest und perfekt!