Bosch Professional 1x Diamond Cutting Disc Standard for Ceramic (for Stone, Tile, Ceramic, Ø 115 x 22,23 x 1,6 x 7 mm, Accessories for Angle Grinders)

I cut porcelain 10mm thick with this blade in an angle grinder and it went like a knife through butter. Excellent value foe money. I even cut 20 mm strips, 600mm long. Lovely blade

Good disc put it on my Milwaukee cordless grinder and cut alot of porcelain wall tiles,it comes smoothly and no juddering I've had with some other discs. Got plenty of life left in it it didn't chip the tiles and you can even just shave the tiles a bit if you need too.

Bought this for first time tiling and read some of the good reviews. It has done the job perfectly cutting my metro tiles. Would buy this disc again as it was a sensible price.

Cuts well. I have used it on porcelain tiles, bricks, concrete and it worked really well

Our daughter has recently moved house and asked me if I fancied a bit of tiling in her kitchen. Normally, Duncurin would avoid this sort of task like the plague but ever since I bought my Victrex wet cutter from Amazon, my confidence has grown and I suggested to her that I’d be happy to give it a go. Then she had the tiles delivered and I found myself regretting my decision. The large hexagonal tiles seemed really tricky and way outside my comfort zone. Gulping heavily, I thought that it was perhaps time for a new blade for the cutter, just to give me a fighting chance. I must confess that I was a little disappointed with this blade when it arrived and I regretted that I’d not bought a higher quality one which was perhaps thinner and would give better cuts. Sadly, it was too late to back out and I fitted the blade, which was the perfect size, and away we went. Although the blade is a teeny bit thicker than I was anticipating, it still cut beautifully and the hexagonal tiles didn’t represent a problem. I had it in my mind’s eye how I was going to fix the tiles and of course I was going to position the flat straight edge down so that it ran along the worktop. My wife and daughter, however, had different ideas and suggested that the way to apply them was pointy side down. This, even before I began, took me way outside my comfort zone and of course changed all the cuts I was anticipating having to make. The Bosch blade rose magnificently to the challenge and I found that by measuring and marking very carefully and then checking and checking; it cut really well and at no time was the thickness of the blade a problem. Of course, the water goes everywhere and using a rain poncho and full-face visor is just about a must and even then, prepare to get drenched but of course it goes without saying; not to let the reservoir run dry. The other useful thing was a little retaining bracket I made in wood which held the pointy bit of the tile when I needed to cut through the tile perpendicular to the flat edge. I wasn’t sure that I could hold a straight line but by using the wooden former and then running along the fence, this worked really well and excellent cuts were obtained which were the correct size and had a straight side. I also found that by turning the tile face side down improved the edge/smoothness of the cut and most vitally on the triangular bits, that of course I now needed to cut to fill between the tiles, it is vital to really slow down as you get to the end and let the cutter take its time or you will end up by chipping the end of the pointy bit and it may look untidy ie not something that the grout will forgive. The electrical sockets were the next problem and of course they all had to come off so that I could tile behind them. This meant that I needed longer screws to re-fix them so make sure you have a supply of these or you’ll have live sockets hanging off your newly-tiled surface while you wait for them to be delivered. Also tiling behind the sockets meant that “L” shapes would need to be cut out of the tiles and once again the blade and the wet cutter did this beautifully. Because of the curve of the blade and the angle of the cut it makes, in order to get the most precise meet point in such an “L” shape you may need to turn the tile face up in order to minimise any overcut and once again this worked really well. Please see the little video attached and I am pleased with my efforts. Most importantly my wife thought so too (big relief) and our daughter was delighted. So, the blade is inexpensive enough to perhaps order a new one for each tiling project and maybe this is a better strategy than buying a more expensive one and running it for longer.

Brilliant price. Brilliant product

Used successfully to cut flagstones, very sharp .

Having used many different porcelain cutting discs, I was attracted by the price and so decided to give this a try. Used for 600 x 600 20mm exterior porcelain tiles by CTD. In short, the performance was pretty average and the only downsides being the slow rate of cut and the tendency of the disc to cause some chipping. The wear rate was similar to other discs. If you have a light coloured exterior porcelain slab to cut (where chips are more noticeable) then, in my experience, this is not the best choice - an Abracs disc is thinner and faster and, although more expensive, they will chip much less. If you are cutting bricks or concrete then a continuous edge disc like this is not the best choice either. All in all, good value for very much an average performance on thick large format tiles.

Speciaal gekocht om een composiet aanrechtblad op maat door te slijpen. Ging perfect.

Uygun fiyat sorunuz alışveriş

Excelente producto, sirve para lo que se anuncia y el precio estaba regular, envio rapidisimo y materiales de muy buena calidad

daha önce avuç taşlama canavar sprial ne derseniz ile her şeyi kullandım ama mermer hiç kesmedim mutfağa kombinin altına dolap yaptım mermerleri zamanında yamuk uzun kesmişler onları düzelttim ama baya toz duman oluyor heryer elektrik süpürgesiyle birisi çekse daha iyi olur çok toz duman olmaz başarılı susuz kesmede

معرفة الاستخدام