MATICOD Motion Sensor Lights Indoor Under Bed Lights, 3500K Motion Sensor Led Strip Lights for Bedroom, Warm White Under Cabinet Lights for Kitchen, Closet, Stair Night Light, 16.4ft NO APP

Motion detection is very good. The 120° angle is more than sufficient for most cases. I have two sets of lights, one in the kitchen and one in the bedroom. Kitchen: Mounted under the cabinet provides plenty of light for a lot of activities. Sensor detects motion as soon as I enter & turns off a minute or so after I leave. Very rarely, I would be standing in an 'edge' location and the lights would go off but if I moved a bit they would come back on. Bedroom: After much trial & error, I found the ideal sensor location was at the foot of the bed, facing the door. When the sensor was on the headboard, facing towards the door, not only did it detect when I got out of bed, but the sheet hanging over the edge, or even my oxygen hose, would trigger the lights throughout the night. In addition, the sensor was able to pick up motion in the hallway 15' away. The lights are bright and fairly directional, almost too bright to look at directly without seeing spots afterwards. For this reason, mount them pointing down and below eye level. However, when mounted on the bottom of a bed frame they are susceptible to possible damage or loosening when moving boxes or other items stored under the bed. Instead, I mounted the strip lights on the inside edge of the frame. Now, the underside of the bed is fully illuminated yet still provides enough light on the outsides walk areas. The 'glue' on the back of the strip lights is typical one-time use. Decide the location beforehand, clean the surfaces, then affix the strips. There is sufficient adhesion to keep it applied under normal circumstances but it is still fairly easy to remove. The sensor consists of a snap-on mounting base with a small, yet powerful, magnet embedded in the back. Surprisingly, it maintained position pretty well using just the magnet. There is also an adhesive tape on the back of the sensor. This tape has EXTREMELY strong adhesive properties. I put it on a tile on the kitchen backsplash and it pretty much took a hammer & chisel to remove it! Unfortunately, it is also one-time use so choose the location carefully! The LED lights and sensor are integrated together. It would be nice if the sensor could be connected to different light sets. But for the value, this can't be beat!

Got these lights for under the bed after putting sensor lights up the hallway stairs. Wife loves the under bed lights. They are brite but not blinding. Light stays low depending how you stick them up. You can set them from 30 seconds to 60 seconds. Very sensitive sensor. Come on soon as feet move off the bed or as soon as you hit the doorway coming back. Great lights to not have to hit a switch on the wall. And nothing to forget to turn off after. They are plug in so no battery to recharge. Excelent motion detection. We chose the natural color. More of a yellow color rather then a bright white..

We wanted a motion sensing nightlight to put in our garage for when we open the door from inside the house and need to drop recycling into the bin right next to the door (without missing the bin and having a jar shatter on the concrete). We were tired of needing a hand free to get the light switch but the problem in there is no outlet in the garage that faces the door into the house… so a motion sensor nightlight wouldn’t work because we needed the motion of the door opening to trigger the light. And we weren’t finding a reasonably priced nightlight that would’ve been bright enough anyway. These are basically the led tape lights you put behind your tv or you see in kid’s bedroom with a small added sensor box. We opted for the white for maximum brightness and because we didn’t need colors, nor app control. These worked out perfectly, we could run an extension cord and have the sensor directly face the door and it works like a charm and provides plenty of light to temporarily light up the garage just enough. Through the garage window you can see it shuts itself off based on whatever you set the off mode at. I believe 1-4 are 30/90/150/240 seconds. There’s also an ‘always on’ option that defeats the motion sensor. The sensor is sensitive enough to open when the garage doors themselves are opened as well. We’re hopeful come summer that bugs won’t set it off, but not a huge dealbreaker if they do. Well worth the $10. These would be perfect to add light to a closet or inside a cabinet as well, triggered by the doors. If you want them for a kids nightlight, opt for the colored version for the cool factor.

Does well; range of motion sensor picks up a little further than we thought it would which is great. For a 'night light' under the bed its a little bright but not too bad; great for walking thru the bedroom to the bath tho. I got the clear/white; wish I had got the colored for muted shades. Overall a good pick and does the job well.

Very sticky tape! Set on sensor mode, works every time. Bought for elderly couple, installed under edge of bed, so when we get up at night, it’s low lights, but can see great to go to restroom or get to light switch. Also purchased another for other side of king bed. Purchased a motion sensor light for toilet also. Great solutions for elderly!

Very easy to install, lights look amazing where it needs to be. Now I can wash dishes without it being so dark. The app lowers the brightness so it’s not so bright. The only complaint I have is that the app for scheduling the lights for a certain time is horrible. No matter how much I try playing around with it, it doesn’t want to stay on for the scheduled time. So if you were hoping you could be able to schedule a time for when these lights can be on, I suggest looking somewhere else. But other than that the functionality of the lights so far is good! The motion sensor works well! I notice that if you play around with the app so much it will not detect your motion but nothing like a good old, turn off/turn on can’t fix (have to turn it off/on from the app to reset). Other than that complaint, love the lights :)

These under bed lights are easy to set up and are VERY bright. They are not able to be dimmed so they were too bright for me. I bought ones that can be dimmed.

These were so cheap that it was easy to buy them despite the comments doubting their durability. I’ve installed two of these inside an Ikea wardrobe, and they’ve been working great. It’s been 11 months and no sign of issue. The amount of light is perfect for a wardrobe, not too bright that it blinds you but enough to see everything. Great value.

We've put the lights under my son's bed to make the play space more usable, the lights are great and really bright, my son has positioned the sensor so they come on as he climbs our of bed. Excellent product especially for the price

I purchased the led motion strip , After reading Positive reviews. The item came in a small box , with very easy to read instructions. Straight forward to install. Sticky backing on the strip. But make sure you clean and dry the area , Before installing. The led lights look great. You can easily change the settings on how long you want to lights to stay on. I set mine for 2 minutes. Motion Sensor works all the time. Very happy with purchase ☺️

Nice and bright white lite and easy to apply. Sensor is very responsive. After some time a split developed on one of the bends so some don't work anymore but using in a cupboard so not a problem.