YAARHEJ 2 Set The Desk Mount for The Flight Sim Game Joystick, Throttle and Hotas Systems Compatible with Logitech X56, X52, Thrustmaster T-Flight Hotas,T.16000M,TCA,Wining orion 2

For the price, you really cant beat it. Holds my STECS standard super solid, but there is a tiny bit of flex with my Gunfighter MCGU (W/100mm ext) on the mounting rails. Not enough to be a cause for concern, however I would much rather see another solid piece of extrusion with a joiner rather than 2 separate, smaller rails for a little added stability. Edit: bumping this from 4-5 stars. I wanted to make a few customizations to resolve the flexing issue and lengthen the main piece of extrusion and they responded pretty quickly with all the answers I was looking for!

The quality of the product itself appears to be of good construction. I would love to actually be able to use this product but I cannot assemble it with the screws/nuts they sent. The assembly screws are the wrong size. The smallest round head screws (#12 from their instruction manual) are too long to be used in the assembly. They also do not have the proper amount of round-head screws or slide nuts. They included a total of 10 slide nuts (see my picture). There are two desk mounts, each mount needs 10 for the base connection and 4 more for the custom mount section that attaches to the peripheral (Joystick/HOTAS). That means that I need 28, not 10. Update - I contacted the manufacturer and they are sending the correct screws. They have been very responsive 2nd update - They sent the correct screws and nuts. The product works great once I got it assembled!

I was looking for a winwing compatible well made support. I have to say, this is really the best one you can get. Look at the pictures that is all you get, lot of bolts and small pieces for different controllers. Qualitty, well this is all metal and you get those plastics covers to avoid damage when touching the edge of the plates holders. Love it. Update: 2025 I got a second one,this time for my Thrustmaster A10 (got the first for my F16 winwing), I have to say I am really happy. Just to clarify Winwing users, if you're considering this mount for the F16 throttle you should consider to use one joystick base to get it done. The throttle itself have 2 holes located at the center. Take 2 long screws from top to boton, this will be the best way to get it done. There is no way to use the regular throttle base with F16 guide rail installed.

Provides what is advertised. Both mounts were very straightforward to put together, and are made of solid materials. The mounting plates worked well for both my Winwing Ursa Minor and Moza MTQ Throttle Quadrant, both of which have non-standard screw mounting holes. However, these mounts smell absolutely horrible. They have the smell of cheap industrial grease right out of the box to the point where after assembling them I had to remove them almost immediately because sitting at my computer was unpleasant. I washed each and every piece with heavy soap and steel wool, only for the smell to remain. Turns out, the smell was coming from the rubber pieces (the grip for the desk clamp and the rubber stoppers on the ends of the arms). The coating also left a residue, so anything I touched after also had grease on it. Once I cut off the rubber around the grip and threw out the end caps, the smell dissipated. If you're going to buy these, wear gloves when handling them until you can get the rubber off and clean them thoroughly.

Disappointed The product quality seems really good. It's nice and sturdy, however there is a serious issue with it. The screws (listed as #12 in instructions) are round which prevents the lower assembly from moving past the clamp when you are adjusting the height. You are only able to adjust the height either above or below the clamp assembly. Thr inly way around this is to remove one of the screws in the lower assembly which isnt a good idea. They really should have included flat screws for this purpose. This also prevents the product from folding for storage because the #12 screws hit the two arms on the side. The issue came up immediately during assembly and I spent probably 20 mins rechecking my work and the instructions thinking I was assembling it wrong. I wasn't.

I got this because I was looking to attach my joystick to my desk and get some more room back but i got cut on this joystick and throttle mouth about 5x just putting it together from the sharp edges and after I got them together I got cut twice just put them in reach Clamps for the desk mounting is great but they could have covered some of the sharp edges more they did a little bit but there's several more they could have covered

I've never used Monster Mounts or some of the pricier mounts but I can't imagine their higher price makes up for what you get with these. Those might better but for less than $100 these are almost impossible to beat. Using them with the TM Warthog HOTAS which is a pretty heavy HOTAS setup and they work great. If I had a complaint it would be that they aren't the easiest to assemble but if you follow the instructions and have half a brain you won't have a problem. Easier than setting up my bindings on SC or DCS.

When I open the box the bolts and anchors were all over. The bag that held them had broken open. Upon inspection it looked like just a really cheap bag. Once I cleaned them up I noticed the other hardware bag (same design) also had a slit in it but nothing had fallen out of it yet. It looked like all was there but after assembling everything there were 2 bolts missing from the first pack. Not a big deal as I picked up a couple from the local hardware store. Otherwise all works great just need better hardware bags.

Perfect, I've been using it for a month now and it's fantastic!

Super solid look nice !

1. Tag: Die Befestigung macht insgesamt einen guten Eindruck. Bei Belastung der Befestigung gibt bei mir sichtbar nur die Tischplatte nach. Die Befestigung selbst hat bei zweckgemäßer Belastung keine erkennbare Nachgiebigkeit. Die Kniehebelklemme rastet sicher ein und löst sich nicht unverhofft. Die Betätigungs- bzw. Klemmkraft lässt sich über eine Stellschraube am Gummipuffer oder durch Verschieben der gesamten Kniehebelklemme gut einstellen. Das Halteblech, gegen das der Kniehebel drückt, hatte ich eingangs als potenziell nachgiebige Schwachstelle vermutet, scheint seiner Aufgabe jedoch gerecht zu werden. Das Halteblech kam bei mir vormontiert an, die Schrauben waren aber nicht ganz fest gezogen. Die Verschraubung würde ich Benutzung überprüfen. Die Installationsanleitung sieht die Montage des Knotenblechs als umgekehrtes T vor. (ggf. Video ansehen) In dieser Einbaulage können jedoch rückwärtige Schraubenköpfe mit dem Abstandshalter der Kniehebelklemme kollidieren und zu Einschränkungen der vertikalen Verstellmöglichkeit führen. Es kann das Knotenblech aber auch als gekipptes T montiert werden, wodurch diese Einschränkung komplett aufgehoben werden kann. Im Paket enthalten ist außerdem ein nettes Sortiment an Schrauben, Flügelmuttern und Unterlegscheiben, die gut zur Montage der Joysticks und co. genutzt werden kann. Diese Sortiment scheint nicht beworben zu werden, ist aber definitiv nützlich. 2. Tag: Halterung passt übrigens auch problemlos für den HGP Shifter von MOZA RACING.

Produto começa a dobrar a base na zona dos parafusos do apoio da mesa, ainda só tem 2 meses de utilização. Acho o valor demasiado exagerado e o produto complexo para montar, demora bastante tempo. Quem não tiver jeito para bricolage têm um problema. A mim correu bem, mas demorou um pouco. Além do mais o cheiro a tinta marítima é muito intenso, os fechos vermelhos não são práticos para zonas da mesa onde nao seja completamente vão (que é o meu caso, tenho uma gaveta) então para ajustar nestes sitios é necessário prender a ponta e depois ir rodando até reposicionar. O fecho devia ser directo e na vertical. Isto produz que a borracha que é mal colada, tem-se vindo a descolar e a ficar separada. Portanto este produto não deveria custar mais do que uns 50 euros, e não 110

They work as described. Easy to attach or detach as required. Well designed and constructed. Caution they are self assembly and you will need to allow upto an hour to bolt it together. Lots of screws, bolts, nuts and plates are included allowing for fitting to practically any intended accessories.