Sealey Suction Clamp Set, 81mm x 258mm x 193mm, Blue, 6 Pieces - RE006

Worked really well fixing it rear window on my audi a3 convertible

Excellent product when used as should be used tighten slowly and work middle then ends and so on adjust as needed used on my convertible rear window would have been lost without but as I said before tighten slowly and do no tighten from 1 end to the other

They do the job, just. Windscreen needs to be clean or the suckers won’t stick.

Used to hold Audi TT rear window to fabric . I had the bottom corners starting to come away . Used Masterbond windscreen adhesive which has held very well . Clamps very useful for holding in place until adhesive dries as per many reviewers pictures . Would be happy to reseal whole window but hopefully won’t be necessary . Don’t worry about wiping away excess adhesive as can be gently cut away once dried . The adhesive is messy stuff so wear gloves if possible .

Used on the rear glass on my cabriolet. Kinda worked but hit and miss. Often would detach even though glass was clean. When they worked, they were great.

These are a game changer. I purchased these with master bond 1 hr windscreen kit. What I will say is change the nozzle on the bond to half the size it comes already cut. I got rid of old glue as best I could but not factory glue. Squeeze this between roof and window then clamp down. Obviously the bond squeezes out. It’s difficult to wipe away excess as the clamps are there so as stated don’t squeeze out too much. It then bonds within an hour. Once stuck unless you are a professional corker I then put masking tape on roof and window used the bond and then finished with your finger. What a result. It’s stuck and the finish is like from the factory

Performs and expected and don't bend when left over night.

Great set of clamps. I purchased them to aid my refitting of the rear glass window in my convertible soft-top, it was starting to become loosened ....( it is 21 yrs old ). They worked very well. Can definitely recommend.

I was told by a convertible top company, when the glass pops out the top needs replacement. That so far does not seem to be a true statement some good 3M window sealant and these clamps. Follow the directions, get some paint sticks from the local hardware and spend a day or two in warm weather putting your rear window back in. These devices will save you 100's if not a thousand plus to have your top replaced. We did this repair on three cars now and the windows are all still perfectly sealed. This clamp set works great! Just take your time to work around the window if yours completely popped out. This set of 6 will get you across the top of the glass and the corners of a larger window.

Facile d'utilisation et bon maintien

Hält was es Verspricht , konnte Cabrio Heckscheibe Kleben

No functionar, cualidad bajo de China, no tiene, no comprar

Used these to stabilize the glass window to my ragtop on my C5. Works very well! Suction cups actually work!