Lian Li Accessory Universal 4-Slots Vertical GPU Card Holder Kit White, Premium Gen 4 Riser Cable PCI-E 4.0 x16-200mm, PCIe 3.0 Compatible, Compatible with E-ATX,ATX Case (VG4-4-V2W)

A little shaky on the installation and if you have a three fan GPU, it needs a secondary support bracket, but those only cost like five dollars the bill qualities all right and as for size it’s slim enough to fit and nearly in the case without being too noticeable, I think it makes my GPU look beautiful

Very happy! Looks and works great, It fit well with this system: 2019 Lian Li O11 Dynamic case, with MEG X570 ACE motherboard, iCUE LINK H150i CPU cooler, MSI RTX4080 16 GB Suprim, Startech PCIe 4 port serial card. The not so good (but not showstoppers): * It was shipped 'bare' and 'unsealed' in the super-thin (~2mm) factory carton. Thanks to the great amazon drivers, it arrived safely anyway. * The instructions are on a small ( 14 x 21 mm) piece of paper, with mostly pictures, and few words. I can understand the economics of pictures (lower translation expenses), but it was difficult for me to get what the pictures were trying to convey. * The water pump on my CPU made it impossible to fit the GPU if one installed this adapter first The good: * I installed the GPU onto this adapter first, and then installed that combination into the computer. worked great! * No sag noted (instructions did saw to tighten the top screw first, which I think helped). * There was still room under this adapter for my single 4-port StarTech PCIe serial card to fit. * Looks great, shows off GPU * My guess is that cooling is better fans in bottom of case blow cool air through GPU fins I also appreciate the replies to my questions posted here before I purchased this product. That was the nudge I needed to give it a try.

Works perfectly in my O11 Dynamic XL white case. Super easy to install. Color matches the case. Very strong for the most part. I do have a dual water block on my 3090ti, so my graphics card is a little heavy. It does like to sag on the front right corner inside of the case. I put something underneath this corner to help support the GPU from sagging and causing my hardline tubing from looking crooked. Would help if Lian Li provided a small support bracket to keep the far side from sagging with heavier cards.

Installed a 7900 XTX in standard (horizontal) format using the 'Z' bracket that comes with the model i got. Temps were a little hot and i didn't like the look. Install this Lan Li accessory and it helped drop the GPU temps ~8 degrees in vertical configuration. Pics of before and after shown. Works great in case i have - see parts list below. If use build with a Lian Li O11DX or similar case these work perfect. Parts list: - LIAN LI PC-O11DX - Dynamic Black Tempered Glass on the Front and Left Side - AMD RYZEN 7 9800X3D 8-Core, CPU - Thermalright AM5 Secure Frame Black V2 AM5 CPU Holder - MSI MAG X870 Tomahawk WiFi Gaming Motherboard - G.SKILL Flare X5 Series (AMD Expo) DDR5 RAM 64GB (2x32GB) 6000MT/s CL30-40-40-96 1.40V - 1X SAMSUNG 990 PRO SSD NVMe M.2 PCIe Gen4, M.2 2280 - 2TB WINDOWS DRIVE - 3X SAMSUNG 990 PRO SSD 4TB PCIe 4.0 M.2 2280 SSD 1X USED FOR GAMES/PROGRAMS/PHOTOS 2X RAID (MIRRORED) FOR STORAGE - XFX Speedster MERC310 AMD Radeon RX 7900XTX Black Gaming Graphics Card with 24GB GDDR6 - Seasonic Focus GX-1000, 1000W 80+ Gold - Lian Li Accessory Universal 4-Slots Vertical GPU Card Holder Kit Black - 3X Cable Matters 8 Pin GPU Power Cable 2ft, 8 Pin EPS / 8 Pin ATX Male TO PCIe Male Graphics Card Power Cable - NZXT 360mm AIO CPU Liquid Cooler with Customizable LCD Display - 3X Phanteks (PH-F120T30_BG_3P) T30-120 Fan Triple-Pack (9 TOTAL FANS)

Super easy to install in my Lian Li 011D Evo XL, but weight of 4090 does cause the bracket to sag a bit. Doesn’t cause any pressure issues with the graphics card itself (I am using a MSI 4090 Gaming X Slim) just looks a little funky. Making some type of support for it should be difficult though.

Works overall, but could be stronger. Card sags a bit on the end. Can’t use all slots, some are covered by the back of the case. Wish I had waited for the latest version

The fitment was fine, but after much painstaking troubleshooting, I've discovered that the riser cable has not only been causing my random crashes, but it's been making my screen flicker in and out of HDR while enable in Windows. I thought I was going crazy, testing my RAM and CPU for stability issues, but it was the riser cable all along. Buyer beware that this might cause issues. For reference, I'm using a RTX 5080 paired with a NZXT Z690 and i13900K.

Pretty sturdy and looks great.

Finally found a mount that allows for 2 rear fans (120mm) and fans at the bottom in my O11 Vision Compact.

harika

nessun problema a tenere su una rtx 4070 super ti senza flettere neanche di 1 mm

Top ! Magnifique rendu et pas d'inclinaison malgré le poids d’une 4090 Suprim X.

جودة المسامير المرفقة سيئة