Lian Li O11 Vision -Three Sided Tempered Glass Panels - Dual-Chamber ATX Mid Tower - Up to 2 x 360mm Radiators - Removable Motherboard Tray for PC Building - Up to 455mm Large GPUs (O11VW.US)

Fantastic case. Having built in the two previous versions of the O11 Dynamic Line, I had high expectations. The Evo was already a marked improvement over the original O11, but the Vision changed the game with the addition of a new glass panel on the top. Slightly less airflow, and you can't top mount a radiator if you use the glass panel, but you have both options available. Build quality was impressive as usual from Lian Li, and even with less airflow with the top pane, there was still more than enough to keep everything running cool. Plenty of room inside the main chamber for all of my parts, and plenty of cable management space in the back chamber. Just make sure all of the bottom cables on the mobo are properly arranged if you are using fans on the bottom of the case. It is definitely a larger case for fitting into a workspace but definitely worth making the room for it.

What More Can You Expect From Lian Li Cases!!! There Out Right Awesome!! I Run The 6 Intake Fans and 2 Exhaust Fans and The Glass Top Option!! Cooling is Not an issue!! Max Temps seen on gpu (72 degrees C and CPU (60 Degrees C) Playing Cyberpunk 4k High Settings 60fps Cable Management is Great!! Installation is Easy(If You Done This Before)!! One of the best looking cases on market that gives easy setup options using the thumb screws to remove panels etc The Value this brings for the money can’t be match! Size this great!! It’s Little Wide but not so tall. I was to fit on my desk from ikea which is about 58in with my 27in monitor and has plenty of room for another bigger monitor!!

The Lian Li O11 Vision Compact Black ATX Mid Tower Case is an absolute winner for anyone looking to build a clean, modern, and well-ventilated PC. From its premium materials to its smart layout, this case makes building both effortless and visually stunning. Build Quality & Design: ✅ High-Quality Construction – The steel frame feels solid and durable, while the tempered glass panels add a premium touch. ✅ Compact Yet Spacious – Despite being a compact mid-tower, it provides plenty of room for high-end components, including large GPUs and multiple cooling options. ✅ Panoramic View – The three-sided tempered glass design makes this case perfect for showcasing your build, especially with RGB lighting. Cooling & Airflow: ✅ Great Ventilation – The airflow is surprisingly good, thanks to well-placed vents and the option for multiple fan and radiator configurations. ✅ Customizable Cooling Options – Supports liquid cooling and high-performance air cooling with ease. Ease of Building & Features: ✅ Easy Cable Management – The back-connect motherboard support makes routing cables much cleaner, resulting in a clutter-free build. ✅ Tool-Free Installation – Installing components is quick and hassle-free with the tool-less design. A Few Things to Consider: ⚠️ Cable Routing Needs Planning – The compact design means that cable management requires some extra effort to keep everything neat. ⚠️ Limited Front I/O – The front ports are minimal, so if you need a lot of front-facing connectivity, you might need a hub. Final Verdict: If you're looking for a stylish, well-built, and feature-packed case that makes your PC look incredible while keeping it cool, this is the one to get. The tempered glass panels make it a showpiece, and the smart layout ensures excellent performance and easy upgrades. Highly recommended for anyone wanting a clean and high-end build experience.

Best case I've ever built with. Airflow is good. 7800x3D idles at 40 degrees. I appreciate the little things that this case provides and I never even knew I needed. Pros: - You can strip just about every panel off the case which gives you all the room you need to maneuver and route wires - Bottom and side radiator/fan brackets come out so you can mount your fans to the bracket and install all at once. Especially convenient on the bottom if you need to wire something on your mobo after the fans have been installed. No need to remove each fan individually to get back there. - Tons of room in the case, both in the front compartment and rear. - Hard drive cages allow you to secure the drives outside the case and then install with a single thumbscrew. - PSU mount is in the vertical center instead of the bottom so you don't have to run all cables the exact same way and cause a traffic jam. - Swinging gate on the back holds your wires in place and allows you to mount HDDs and hubs on the outer wall. - Grommets keep things looking clean - Everything fits tightly, provides good airflow, and assembles with the minimum amount of screws necessary while still feeling sturdy and secure - Glass is so clear it's easy to think it's not there. Cons: - GPU anti-sag bracket is a good idea but if you have a triple fan GPU, the bracket will interfere with your third fan. If you're not using it, it's just in the way. I will be removing the bracket.

Best case on the market. Cable management is easy in the back, setting this build up is super simple the way the case is laid out. the glass panels come off easily and this case was built with a builder in mind. Functionally it fits everything I need it to and I have 8 fans, a radiator with 3 more fans behind it and my 3 fan gpu so its full but looks great. stays cool too.

The Lian Li O11 Vision is a premium mid-tower PC case designed for builders who want their hardware to be fully visible. With three seamless tempered-glass panels, a dual-chamber layout, and strong water-cooling support, it’s widely considered a showcase case for high-end gaming builds. Overall Verdict The Lian Li O11 Vision is one of the best showcase PC cases available. It’s perfect for gamers and PC enthusiasts who want to display RGB lighting, custom loops, or high-end hardware through its panoramic glass panels.

Ürün de satıcı da başarılı

Fast delivery, the delivery guy called before delivery, which helped me to plan my time better. Item was well packed. Loved the design of the Lian Li O11, made the installation process a pleasant one. The seller made the effort to ask for feedback after the transaction. Would recommend!

My second Lian Li case. It looks wild right out of the box. Mine was perfectly protected. Feels as solid as it could, being 3-sided tempered glass. I don't overclock, and my temps are perfect, even under max load. Using a 360mm AIO pulling air in from the side, 2-140mm intake from bottom, and 1-120mm exhaust on back (this wasn't necessary at all, I only put it there for the look) and my 14700k does not crack 92. Recommend reusable latex gloves or whatever anytime handling the glass, less effort than cleaning smudges.

Great case, lots of airflow with the mesh top or max aesthetics with the glass top. Cable management is good, case is easy to take apart and put back together with multiple removable fan trays and relatively well thought out for AIO's. If using an AIO, double check tube length for the pump, I almost came up short with the Be Quiet Light Loop 360mm. Lots of room for big graphics cards and a GPU support bracket. First dual-chamber case I built in, and I don't think I can ever go back to a regular tower. Only cons I can think of is the weight and potential issues with PSU cables on the swing-out SSD door. I ran into an issue where I couldn't plug in the sata power cable to SSD drives, but managed to figure it out. Fantastic case by Lian Li, highly recommend it

This case is one of the best out there. This is my first white-themed build. A lot of room for anything you might have, the best cable management that I have had in a case, stylish, clear glass, smart design, love it!