PCCOOLER CPS C3T500 AIRFLOW Mid-Tower ATX/M-ATX/ITX Case, Pre-installed 6 120mm PWM ARGB Fans,Column-Free Design,270° Full View Tempered Glass,360MM Radiator&400MM GPU Support,Easy Installation,BK

First time buying this type of case, and was concerned about the size. I need not have worried as it's easily the best case I've ever bought and at a much lower price than others. Recommended it to a friend and they bought the same one. Love the glass sides and the fans are so quiet I forget it's even on if I leave my PC running in the background.

Wanted to downsize case from a Corsair 680x to This C3T500 case for more desk space. Came well packaged, no damage and was very happy with footprint and aesthetics of the case. Case comes with some pre installed fans which I must say are not great in terms of A, air flow and B, orientation of some fans. The side fans are set to exhaust, but ideally should be intakes. The 3 fans on the bottom are reverse intake fans and the rear is set to exhaust. But I knew I was never keeping them so not a huge issue but please be mindful of this when purchasing, Comes with a handy fan hub controller secured to the bottom of the case. Cables were a bit messy but easily tidied. If you have a large heavy gpu that requires some kind of sag support bracket, it installs fine, but at the rear, there is a PCIE cover. The cover will not close if the sag bracket is used. You have a bay at the rear for additional drives, this can be removed for storage of excess cables, or hub controllers etc. space is limited in the back being such a compact case so spend extra time in cable management. If your using a full size ATX board, the header for my usb 3.0 fouled on the fans, I had to purchase a right hand angled usb 3.0 extension cable to connect up. Some small issues but overall, this case is designed fairly well, let down but a few issues but nothing that is a deal breaker. Case looks beautiful and one happy customer

Its alright. Hard drive space seems to assume you have NVME as it only really has space for a HDD and one SSD (SATA) However I managed to Rig it for two SATA and one HDD alongside my NVME without sacrificing space. Lots of space in the back to tuck cables, even with extenders, and plenty of fixings for cable management. If you use a Full ATX board there's no space on the bottom to pull thru cables, but you can rout them around the side from the side ports and the fans hide most cabling. Be prepared to remove the fans to access the bottom of the board. Great airflow and overall design is lovely once assembled. Seems solid build and looks sharp. Value case.

Case looks lovely and is big enough for my setup including a rather large water-cooler radiator.

well worth the money absolutely fantastic, good quality, looks amazing and was an absolute pleasure to build inside.

For this price bracket the case is alright. Would be much better suited to lower end PC builds. If you’re fitting an ATX board as I have it can get a little cramped with trying to wire things up properly. Cable management is ok, but wouldn’t expect much more for this price range. I love the separate compartment for the power supply and hard drives. Air flow is alright considering the space. However the fans that come supplied are absolutely terrible in regards to performance , they max out at 850rpm and their performance is very minimal. They are incredible quiet, but they would be for not a great design with low speeds. They are also all installed to draw air into the computer with no exhaust configuration, so you’ll have to rotate some before assembling. If you are using higher end cards/cpus I would strongly suggest changing these out completely before building the computer. I have had this case for a little over a month and one of the fans has stopped working already. You get what you pay for!

This case delivers everything it was advertised. Stable , good finish, heavy enough not to vibrate. Silent coolers.

I am a big fan of the overall appearance and the fans it comes with, however found that plugging the cables into the motherboard is just as viable as using the fan hub it comes with, as all the cables are chained together. The fans are very quiet and look great for the price. Can be a bit tight for installing some parts.

chassit är billigt och bra o med 6 stycken fläktar så kan man absolut inte klanka på priset. Nu tog jag bort HDD huset på baksidan av chassit så datorn inte kommer använda annat än m2. så det blev sjukt mycket utrymme och enkelt kabelhantering. en negativ del dock är att kör du ATX moderkort så se till att usb,audio och alla F-panel kablar dras fram först för du kommer aldrig få dem att gå under ifrån annars. du kan även göra samma sak med GPU kabeln vilket jag inte gjorde men det ser ändå någorlunda clean ut. chassit har bra med utrymme och ser bra ut. en ska o tilläga är ju den fläkt hub som medföljer också det är guld värt i dem delarna som finns med från grund i chassit. för priset så rekommenderar jag detta chassit.

Dieses Gehäuse ist bisher das einzige, in das ich eine Wasserkühlung, eine RTX 4090, eine Soundkarte, und alle vorinstallierten Lüfter reinbekommen habe! Und trotzdem könnte die Grafikkarte noch ca. 10 cm länger sein, Platz von der Tiefe her ist genug. auch von der Breite her ist noch ca. 6-8cm Platz, für den Airflow also kein Problem. Da das Netzteil getrennt von den anderen Bauteilen liegt, kann man ganz elegant alle Kabel verstecken. Kleiner Tipp: Wer eine 4090/4080 einbauen möchte, sollte das Gewicht der Karten nicht unterschätzen. Durch die Lüfter auf dem Gehäuseboden kann man keinen Halter zwischen Boden und Karte installieren. Es müsste entweder ein Lüfter raus, oder aber man installiert eine Halterung von der Seite.

Goed product. Maar houd er rekening mee dat er wat werk nodig is om het moederbord en andere componenten in het moederbord te installeren.

Both of the the 2 cases before this had some correctable but items that should not have failed in the first place. It was worth the wait this case had the best fan and cable arrangement. The hinged glass door on the front is the only way to go. Not all manufacturers with glass in this price range do it. With the side glass snapping back in place it left this case the best ( of the 3 ) to work on during my build. Highly recommend but change out that cheesy little cloth pull on the door panel put a proper metal one. Will look better & work better.

My first PC case had a covered top. This was a mistake. My GPU was running at 75 degrees Celsius under Load or While Gaming. This case has dropped the Temp by 10*C. My GPU idles at 50*C or below and runs between 60* to 67*C while gaming and watching videos on 2nd and 3rd screen. My CPU is always under 50*C whether idle or Gaming. The case looks amazing and the dust filters do not raise the Temperature. I am really happy that the RGB hub has a SATA power plug on it. My MOBO has the old 4 pin header and this case uses a 3 pin. I was able to plug a 4pin into the MOBO and get all the fans to work and light up. I am not able to change the color with the button on the case. This could be the way I wired it. I was also able to add 3 120mm fans to the top as exhaust. These are from my old build and are Molex daisy chained then plugged into my PSU. With a 3 pin on your MOBO you will not have these issues. The fans are completely silent. I cannot hear a thing. This case keeps my PC so cool the GPU fans are not even on at times. The fact it comes with 6 fans that actually work is a huge pro. I tested with a piece of paper and it blew it away and sucked it to the vents. I would purchase again and recommend, especially at the $83 price point. This was an outstanding deal and there is plenty of room for when I upgrade my MOBO to a full size ATX. It is very large for a Mid size. I could put a GPU in twice the size of my RTX 3060.