GPU Support Bracket, Graphics Card Support, GPU Bracket Brace, Video Card Sag Holder, GPU Stand, Adjustable Anti Sag GPU Stand for Fan Aluminum 129mm

Case: Lancool 216 GPU: 7800XT reference (Sapphire Pulse) 140mm bottom case fans All the screw holes lined up, it secures in place pretty well, provides sturdy support, and is a nice addition to a black case. I love that it came with two longer screws for mounting through the fan and into the case as opposed to some crappy inserts that would leave the fan floppy on that side. I have the motherboard mounted in the lower 'water cooling' configuration. The pole sticks up about an inch over the top of the GPU. This means it would work well for the air cooled config too. If all you want is a fan mounted solution with a minimal offset to take the weight off your GPU, this will work. Put this thing in your cart and stop reading here. My end goal is to have a rigid anti-sag solution utilizing the four 4mm screw holes on the end of the GPU. The end of the GPU lines up a couple mm short of the center of the lower case fan screws. This design was the only one providing a minimal offset plus the freedom to attach the pole anywhere along the length of the fan-mounted bracket. The greater offset afforded by brackets with two sets of fan mount holes may be handy for anyone trying this with 120mm fans, but you will be limited by which holes will be useful on the end of the GPU. I appreciate that this listing included the 8mm pole diameter measurement. After some searching, it seems an 8mm "MSCF Sliding Bracket Guide" (google image search that) is the only other thing necessary to complete a rigid mount. Language barriers exist, so it may actually be a JSCF sliding bracket. I dunno. Amazon does not have any, and I'm ordering by picture. The GPU screw holes are ~21mm apart, so going with the 70mm length bracket guide.

I have an ASUS Prime 5080 OC and it’s kind of heavy, but not ridiculously heavy. So this is just for piece of mind and because I know some newer reinforced PCIE slots can break down when a heavy GPU sags for a long time. So this bracket will take those worries away. I set mine on the bottom intake fans and it fit perfectly fine. However you do have to remove the right middle screw to make sure it sits flush as the holes don’t line up with all 120mm fans. So if you set it on the right side like mine you’ll have to do screw, screw, screw, empty, screw, screw. Look at my last picture & video for example.

Honestly. This was perfect. Needed a basic GPU stand. The way thks attaches is very helpful. Great product!

Works perfectly. It held my gpu well.

For starters the screws don't actually screw into a fan slot. The next issue is that the arm that sticks up vertically doesn't twist into the slider on the bracket how it is supposed to and lastly it doesn't reach high enough to touch my graphics card even if it was able to be secured into my PC case. This was a waste of money and resources and I will be looking for American or European made brackets moving forward.

I would rate this part higher, as it ultimately serves it's purpose extremely well, but the first couple of threads on the post stripped on my first attempt to assemble it. I made sure it was properly aligned first, so I'm not sure if it was a defect or maybe something wrong with the block it screws into. I was originally going to return it, but I was able to get it all together securely with a little bit of added effort. Overall, this is a very convenient and functional solution to GPU sag. The mounting holes aligned perfectly with the holes on my cases bottom intake fans, and the prop is very secure and supports the weight of my 7800xt Nitro + with ease, which is a pretty beefy card. I would recommend it to anyone who wants more GPU support, especially with bottom-mounted case fans.

Perfect for those cases with fans mounted below the GPU. Very easy to set up. Solid, stable and important. My PC has a 4090 and they are nutorious for twising with heat over time; seperating the graphics processor from the printed circuit board. This is a must for anyone with a large, heavy graphics card.

Pretty easy to setup. Cheap and doesn’t look too awkward in the case. It holds strong and actually stopped the GPU fans from making creaking noises. Installed it on a Lian Li TL-140 wireless reverse fan in the O11D EVO XL case at the bottom and fit perfectly.

Exactly as described. Easy to adjust and a secure fit

I recently built a 5070ti setup and I noticed sag within a week, the fans on the card and on the bottom of my case made it quite hard to find one that will work, the normal cylinder ones would end up in my fan and break things. This actually bolts into your fan and then you can slide the entire thing back and fourth to position anywhere along the channel, Its built really well and dosent feel flimsy, it also doesn't attract attention to itself keeping your setup clean

Easy to install and easy to adjust.

Perfect fit for 120mm Lian Li fans, and fixed my GPU sag

I love that Perfectly fits ( you can change the location ) Material 10\10 easy to use