FLASHFORGE Adventurer 5M 3D Printer with Fully Auto Leveling, Max 600mm/s High Speed Printing, 280°C Direct Extruder with 3S Detachable Nozzle, Core XY All Metal Structure, Print Size 220x220x220mm

Je l adore

⭐⭐⭐⭐⭐ A Fast, Reliable, and Beginner‑Friendly 3D Printer The FLASHFORGE Adventurer 5M has been an impressive upgrade to my workspace. From the moment I unboxed it, the setup was incredibly smooth thanks to the fully automatic leveling system. No manual tweaking, no frustration — it was ready to print almost immediately. The speed is one of its biggest strengths. With a max printing speed of 600mm/s, it finishes projects much faster than other printers in this price range, and it does so without sacrificing quality. The CoreXY all‑metal structure keeps everything stable, so even high‑speed prints come out clean and consistent. The 280°C direct extruder with the 3‑second detachable nozzle is a game changer. Switching nozzles for different materials is quick and effortless, and the printer handles PLA, PETG, and other filaments with ease. The 220×220×220mm build volume is perfect for everyday projects, prototypes, and creative prints. Overall, this printer delivers a great balance of speed, precision, and convenience. Whether you're a beginner or an experienced maker, the Adventurer 5M offers excellent value and a smooth printing experience. Highly recommended for anyone looking to step up their 3D printing game.

I run a small business and had been using two printers: an Elegoo resin printer (fantastic printer) for prototypes, and an Creality Ender 3 S1 (below average experience) for tools and fittings. The Adventurer 5M was added to the stable in a fit of rage and desperation incrimentally fueled daily by the Ender 3 S1. This is a review for the Adventurer, but I need to share the behavior I'd been accustomed to from my eldest workhorse, context is important. I acquired the Ender 3 new in box at the end of November 2024. The first, second, third, and fourth things it produced were various sized nests of knotted filament. The plate had no adhesion to speak of, the self leveling feature...didn't, the physical distance the nozzle was from the print bed seemed to have little concern for the numbers indicating the Z-offset. I just figured it was my own inexperience and ineptitude preventing the machine from doing it's best work. Over a time span of roughly 3 months, countless instructional videos step by step articles helped me to triangulate an almost acceptable, almost reliable combination of settings, adjustments, and physical add-ons that would allow the printer to do it's job, most of the time. The best thing about the Creality product, is that it forced me into a level of competence I never would have attained with a reliable printer. It's a lot like owning a cheap Ford: It's just barely good enough to be called a car. Since the Ender 3 was my first foray into 3d printing, I just assumed that's just how printers are: Frustratingly sensitive to EVERYTHING. A few days ago I realized the errors I was dealing with were repeating frequently enough that I knew how to counter most of the behaviors before the wheels came off (The adjustment knobs literally came off 18 hours into a rather large print last month). After steadily escalating jaw clenching frustration was no longer tenable, I tried resetting it to factory spec...which it wouldn't do, it just beeped at me like a petulent child. Fine, I thought, I'll update the firmware. A word to the anyone considering purchasing a Creality product: I would recommend against it. The firmware update process ignores the fact that most people don't wish disassemble their machine to access a port that Creality decided shouldn't be on the OUTSIDE of the machine. Also, the old addage "Keep is Simple, Stupid" isn't terribly popular in that part of China. So, after doing my best to decode the cryptic instructions that later became clear, I loaded the update onto the SD card that came with the printer (which required the card to be reformatted for some reason) and followed the instructions in the helpful readme file. The read me file was one of FIVE files included in the download. I soon discovered that you need to load only ONE of those files to upgrade the control board's firmware. The instructions were originally in Chinese and obviously passed through Google translate a few times to ensure adequate user confusion. The result? My Ender 3 S1 is now a brick. I could feel the veins in my forehead pulsing as I pulled up Amazon. I ordered the Adventurer in an act that I can only describe as "rage quitting" Creality products, never to look back. Boy am I glad I did. The new printer arrived this morning. Well played to the distributor, that was a turn around of less than 12 hours. After some minor assembly and a few downloads, the Adventurer roared to life with a happy little tune. With zero adjustments, no tuning required, no bed leveling, and no drama, the thing just works perfectly. I printed the included benchmark models one after the other with none of the abrasive behaviors Creality built into their "good enough" S1. I then switched the filament to PETG and began running calibration models. Again, perfect performance and holy cow it's fast. It's not a quiet printer, I wouldn't recemmend locating it near a sleeping child, but that's really no concern to me. I'm very pleased with my purchase.

Shipping was fast. Install easy. If not there is plenty of support and videos to help someone if lost. WARNING: Do not put filament sample that is shipped with this printer on its holder. Doing so may cause damage to the machine. Ask me how I know. My filament sample was wounded up and I thought I Had it completely untangled and set the filament on its designed location but since this filament doesn’t come on a roll the filament just has a mind of its own. My filament was no longer sliding and ended up becoming too tight for the printer to pull the filament to the nozzle. I may have a damaged product now because of this. We will see. And I will update weather support is helpful or not. I’m a complete amateur on 3D design and the printing process. I did run TinkerCad and was able to print a few things with a little bit of a learning curve. Without YouTube I would have been lost. Best of luck. UPDATED: It has taken time for me to learn how to design things and after a few weeks I put this printer to use. Long story short, this printer has failed me after 7 different prints. I mean actual printers where something takes 30 mins to 3 hours to complete. My failure started when I was printing things back to back trying to fine tone my design and I ended up with a lot of Filament in a large blob pile instead of any sort of design. I tried to clean the nozzle right quick and try my luck again but I only ended up with a smaller blob of plastic. I decided to give the printer a rest and to try my design again but only doing one part on the layout instead of 2 or 3. This didn't go so well. The printer didn't go home or calibrate correctly on its on and when it started to print the nozzle dug into the base plate causing deem scoring marks. I tried to buff them out and the plate is probably going to be ok for what i need out of the printer but that's not the issue now. My issue continues to be filament not coming out when changing filament. More so I cant get the printer to even print a practice cube. I've tried completely cleaning the nozzle, removed the extruder and filament completely and made sure the extruder gears are messed with no missing or broken wheel cogs or teeth and watched the gears spin and feed the filament into the nozzle. My nozzle temp gets up to 280 degrees but still things are not feeding or spray out even the smallest practice designs. I cant even get a line up mark on the base plate. This printer is supposedly suppose to be simple and great for beginners. With my background in fixing robots and machinery this thing is giving me hell. I can only hope flash forge does away with this model. I would love nothing more than my money back or a newer model this thing needs to go in the trash. I had a feeling things would go south after the issue at setup and they did.

Been using this 3D printer almost daily and have had no issues. It was easy to install the screen and get it setup and calibrated. Print size is perfect for what I print. Using Elegoo Pla with no clogging or stringing. Loved the starter Pla it came with. Love how it has an upgrade to enclose it for more advanced filaments, and how you print most of the pieces needed ao you can make it how you want, which is a great design in my opinion. The only complaint iI have is the slicing program it recommended. The android app was clunky and I didn't like the interface, the program they created was too basic and couldn't get supports to work at all. Using Orca-Flashforge to use it, but it appears to use a really out dated fork of Orca Slicer and missing features that OrcaSlicer has had for a long while.