ANYCUBIC Photon Mono 4, Resin 3D Printer with 7'' 10K Mono LCD Screen, Stable LighTurbo Light Source and 70mm/h Fast Printing, Print Volume 6.04'' x 3.42'' x 6.49''

Great printing 90% of the time. I did experience some leveling issues in the back corner, but was not a big deal. The quality of the prints were very good, especially for the price of the printer, although it had a smaller print size than I was expecting, which had me constantly having to adjust the size of my model. Most of the time the prints were very accurate, although some of the time, especially when I was printing larger things I would experience some warping. And in one specific case when I was trying to print a light saber that came in many pieces it straight up just didn’t print a few of them. I don’t know if this was a printer error or a computer error but something happened that caused like half of the parts to not print. The resin vats did have a tendency of breaking, which was annoying, but not too bad, and may have been my own fault. although it did cause me to have to replace the LCD screen, which surprisingly was not that expensive and I think was only like 25 to 50 bucks. One thing I will say is it doesn’t work great after your friend punches it because they don’t know how to play VR and set up their boundary way too close. Although this is not the printer’s fault, it did give me a good chance to see how easy it was to clean seeing as when my friend punched it. It was in the progress of printing. It is very easy to clean, and if you approach it with common sense is not too difficult to take apart and deep clean.

I was a little hesitant about getting into resin printing, but the ANYCUBIC Photon Mono 4 has completely won me over. Right out of the box, setup was quick and straightforward. The instructions were clear, and within an hour, I had my first test print done. The print quality is fantastic—sharp details, smooth surfaces, and minimal layer lines. I’ve printed miniatures, custom parts, and even some intricate models, and everything has turned out beautifully. The monochrome screen speeds up print times while also lasting longer than traditional LCDs, which is a huge plus. I also appreciate how user-friendly this printer is. The resin vat and build plate are easy to clean, and leveling is simple compared to other printers I’ve used. So far, I’ve had zero failed prints, which speaks to how well-calibrated this machine is. If you’re looking for a reliable, high-quality resin printer at a great price, this is definitely the one to get. Highly recommended!

Bought this on sale and have been so impressed with the smooth, detail oriented quality prints & ease of use. Perfect for serious printers who are eager to print. Highly recommend!!!

This printer is my first foray into printing 3d models of characters and the setup was quick, and quite easy despite that the leveling is manual it is also straightforward, and the overall user experience is beginner friendly. I really like the laser-engraved build plate and resume function, plus the included tools helped me out quite a bit for a first print. Print quality is consistently high, even with minimal settings tweak on the slicer, I did notice some lines on my print but I feel like that is more due to my settings and trying to understand things. However it also has its downsides which include a mostly plastic build, a small low-quality touchscreen, and a slicer (Photon Workshop) that can be buggy, so I ended up using two slicers with the Photon just for printer settings and export. ALSO the biggest downside is the FEP is a whole unit complete and stretched that is not compatible with any other models and you do need to buy specifically, which I had to do it asap due to it quickly making my prints fail due to the lightest scratch. Still, for the print quality and price, it’s a great entry-level resin printer with good results.

Pura vida 😍

Liked: I liked the easy setup and high resolution. It prints fast - about twice as fast as my current 4k printer. The print size is large enough to accommodate most prints you'd want, while not being so large that it takes an entire bottle of resin to get to a good level. The bed is very easy to level and feels more secure than my Elegoo Mars 3 with four points to tighten rather than just two. If you have a print where a piece fell off, it give you an option after each print to clean the vat - I love that! Disliked: It feels a little cheap. Very lightweight and the cover is an almost flexible plastic. But, they had to get that price down somehow, am I right? Neither of these things affect print quality, o they don't bother me much. I will probably order another so I can print more, faster.

While the printer was easy to assemble the printing quality was subpar. Also the printer broke after only a few months even though it was only being used sparingly. Disappointed in this printers quality. I expected a little more out of Anycubic’s resin printer division.

I tried filament printing a few years back, and I just couldn't get it to work very well. The cost of this was reasonable, so I figured I'd give it a shot. I'm so glad I did. The software is usable. I wish I could move the view a bit easier, but it's not utter crap. I liked that the plate leveling was easy- and a one-and-done. I've printed a few things on here now, and I'm happy with them. My only issue is the prints stick too much to the build plate, but that's likely a setting I'm still honinig in. Here are a couple of the things I printed. First is Uzi Jesus from the novel Dungeon Crawler Carl (great read). I painted him for my brother-in-law as he related to this character. The second print was a miniature I created from Hero Forge. The bigger one is standard game size, the smaller one is 72mm scale for a diorama I build. They all printed great with the water-washable resin from Anycubic. Overall, I'd recommend this for anyone wanting to build some small bits for arts and crafts or some practical builds (I printed a small spade to clear out the snowblower chute, works great).

Stampante veramente ottima

Hola buen día, adquirí este producto con ustedes, me gustaría que me dieran orientación ya que la impresora no reconoce los archivos de la usb que agregue para imprimir, si reconoce y ya imprimí los archivos muestra que traía la usb Muchas gracias

I'd advice against buying a resin printer as it's too much work, safety wise. Dangerous too. But it delivers quality. Be careful when you are removing your model, I punctured the thin coated film. It's easy to use for most cases. Comes with pen drive too. Performance is good too. Not fast, at the beginning. Value for money for sure. Just be careful. Because resins are dangerous, I did not know that time.

Impressora incr'vel. Tinha uma antiga photon e esta supera em tudo, desde tempo de impressão, qualidade da impressão e extremamente silenciosa (nem parece que está funcionando). Recomendo

Not good