PRYSM WB44T10011 Oven Bake Element Replacement - Compatible with General Electric, Hotpoint, RCA Ranges replaces WB44T10011, WB44T10059, 820921, AH249286, EA249286, PS249286

Perfect fit. Easy installation. Works great! Made my wife happy!

This is the second time I have had to install a new bake element in this oven. Last one was almost an exact 5 years ago, was also from Amazon but a different seller/brand. This one looks nicer right out of the box. Last one wasn't perfectly shaped and now that it has failed looks more exaggerated than it did 5 years ago. Hoping this one last longer, never had any issues with any other parts of the oven at all. Installs quick and easy, you really don't even need to pull the unit out from the wall unless you have no other way to remove power before you work. Took me all of 10minutes start to finish and works great first time. I did not need to go through a "burn off" cycle of anything like we used to years ago with electric ovens. Nice product, I would buy again. You really can't beat the price - even if you had to buy one every 5 years.

Super easy replacement, 2 spade connectors and two screws (after removing rear access panel) to remove and replace old element. New element working just as it should!

Perfect match for replacement! Arrived superfast. I installed it myself and it works great. No complaints here.

Purchased this replacement part for my stove when the old bake element shorted out spectacularly. We inherited the stove when we bought the house, so there's no knowing how old it was. The install was relatively easy but ended up being a two person job - we did end up having to pull the stove out and remove the back plate to swap out the elements due to how short the wires were. Much easier to swap the connectors from the back of the stove versus messing around with the insulation and wiring through the front. Also much easier to have two people to slide the stove out, and help line up the connectors and backplate when they're being reinstalled. After we put everything back together, we tested it and it heats up! The element did give off a smell, as is expected with a new part, but should dissipate with use. Hopefully this part lasts a long time! I'll update if anything changes but for now, I'm impressed that it only took $30 and a hour of my day to fix, versus spending $200+ for a service call.

The product was super easy to install. The dimensions given in the picture match perfectly. Now with the new coil my oven preheated in half the time it usually took! All in all, for the value this is a great product, considering the prices others wanted! It's never convenient when your oven quits, but this at least took away some of the headache!

It works great

Perfect fit easy to install

The element was the exact match to what I needed. It arrived about 2 to 3 weeks earlier than expected and was very easy to install. There were no instructions on how to install the new element, I went to the University of YouTube. It was very easy for this 57 year old woman to do, took all of 15 minutes to remove and install the element.

Well packaged exact replacement. It is an easy install, in some oven it can be done from the front only in others, you'll have to pull the appliance to wire from the back. Either way, with the right tools it is less than 30 minutes. You'll need a light source and a 1/4 inch nut driver. -turn off the breaker -empty your oven -remove the two screws in the back holding the element in place -slightly pull on it and see if you can expose the eyes connectors. If so replace the element, put the two screws back, run the breaker on and turn on the oven. -If you can't see the connector, pull the oven off the wall -pull the plug -remove the back panel(s), undo the connector for the element, go back to the front and screw the wiring in place -go back to the back, do the connection -close the back and continued with testing as above

Received on time. Easy to install. Works good 👍🏻

Fits perfectly in my GE jcbp240dt1ww. The original ge bake element was around $300. This saved me over $250.00

Perfect replacement for our broken bake element. Easy to install and will save you the cost of calling a repairman to do it for you.