Thermal Grizzly TG Putty Advance - 30 Gram - Electrically Non-Conductive Thermal Putty for GPU Modding and Thermal Pad Replacement

I wish i took pictures of what my gigabyte rtx 4070ti gaming oc looked like with all the putty on but i was eager to just close up It up and get it back into my pc. 1.) i will say that this putty is pretty difficult to work with, i recommend following the methods seen on YouTube from a creator called “snarksdomain” he’s absolutely fantastic in explaining what he’s doing and his methods are easy to replicate so i highly recommend yall watching his putty application videos. Now back to the difficulty of this putty, it’s pretty difficult for it to stick onto the subject area but i believe you have to do make sure the area has some of that smoky debris for it to stick. 2.) if i had to talk about the value for money of this product, i do wish that maybe they gave a little more with the price they charge. It is what it is because this is some pretty great stuff but you’ll be underwhelmed with how much you get as it’ll be enough for only one GPU application. 3.) as for the temperatures the hotspots are down at least 10 degrees Celsius and the averages are down just as much. It’s quite possible i should’ve applied more putty to certain areas but the temperatures are lower than the stock pads that it came with. I recommend this product and i will also say their phase change material pad is also ideal for the GPU die fyi.

Great if not better putty then the original Xbox series x putty have had my series x for 5 years now and had a huge hot spot on my apu so this mixed with mx-6 was a huge upgrade in cooling

Overall a great product. Take this with a grain of salt as the last time I looked was quite awhile ago but I believe it's helped lower VRM temps on my GPU about 10-12 deg when under load. All in all, while pricey for the amount you get(hence the one star deduction), it could be worth it. Notes: - You may have to use generous amounts depending on your situation, so I'd recommend to buy at least 2 vials unless you have a store nearby that also sells this. I almost ran out; better to have another vial available and ready rather then run out and have to wait to get more. Hopefully you'll only need one and can return the second one. - Sticking it in the fridge does help with usability; that said it's not terrible when it's room temp. The one thing I would say though is that it makes it a bit more difficult to get exactly the right amount. It'd be way easier to get the exact amount to spread across the component you want to use it on, the question would then be, given how little you get with each vial, is whether or not the amount too much or too little in terms of being able to make contact with your waterblock/air cooler while still covering the components. - Use at least 2 of the spatulas; one to scoop, one to spread. For me it was a lot easier to spread with a clean(er) spatula than a dirty one. - cleanup seems do-able with the isopropyl alcohol, but will may be a bit tougher to clean up in between components depending on it's state and/or how it was applied.

I purchased the Thermal Grizzly Putty Advance 30g as a replacement for the thermal pads on a MSI Armor 2070 Super due to an increased thermal hotspot temperature. There was a noticeable improvement in thermal hotspot temperature by more than 20% in some instances. I also used Thermal Grizzly Kryonaut thermal paste for the GPU die and CPU with good results as well. My biggest complaint is that the putty is a pain to apply if you're looking to spread it. The spreaders that come with the putty are not very helpful as the putty just sticks to them. I found that it was best to use the provided gloves to distribute the putty even though it will require multiple attempts due to the stickiness, but eventually it will hold nicely to components. I HIGHLY RECOMMEND you purchase a large syringe to push the putty through when applying it to the VRAM and other components (I did this). The 30g container was more than enough and I had approximately 50% or so left over. If I can give the Thermal Grizzly Putty Advance 4.5 stars due to the annoyance of its application, I would; however, I cannot argue with the thermal results which is what truly matters.

Good quality putty for electronics.

Made a Swift X 14 2024 no longer overheat, and that model always overheats

This stuff is amazing. I did a re-putty on my Gigabyte 5070ti Windforce to avoid the poorly-formulated stock putty from running out and leaving my components exposed more than it already had. Given the 5070ti is a mid-range card (albeit at a high-end price), I did not feel like spending more on the "Pro" putty. All I was hoping was to meet the stock performance while avoiding running out. I only needed about 15g to replace the factory locations, and used the remaining putty between my backplate and PCB along the power rails and above the 12v connector. I was quite pleased to find that this outperforms the factory "gel" by 10-15°! My memory temps are now lower than my core temps. I paired the putty with TG's Phasesheet for the core, and could not be happier with the combo.

Absolutely worth every penny! I use this on almost everything! Seriously helps with the temperatures. I bought 30g but as you can see from picture, is not as much as seems. Even though the amount might not seem so much, it also can depend on what you’re using it for. It dos spread quite well, and the performance almost justifies the price.

ما جربته لسى لكن حسب اللي اسمعه ان الجوده حلوه

Utilizzata per sostituire i pad termici di una 3080TI che necessitava di repaste del die, con risultati molto soddisfacenti. Ho scelto putty per caso, non avendo mai fatto prima questo tipo di lavori. Il primo utilizzo è stato un incubo in quanto maneggiare il prodotto non è per nulla facile e il risultato è stato pessimo (temperature della VRAM molto più alte dei pad originali). Immaginavo che il problema fosse l'applicazione errata, infatti riaprendo la scheda ho visto subito che la quantità di materiale utilizzata non era sufficiente, lasciando scoperta parte della superficie dei componenti. Come consigliato da un altro utente, se non siete esperti date un'occhiata al canale "snarksdomain" su YouTube, è molto utile per capire bene come applicare la pasta (non serve la precisione estrema mostrata nel video). Ho quindi rifatto il lavoro assicurandomi di coprire tutta la superficie con una quantità maggiore di pasta (i pad della mia VRAM sono spessi 2.25mm) e il risultato è ora molto buono, con temperature inferiori ai pad originali. Resta il fatto che maneggiare con precisione questa putty advance è molto difficile, in quanto tende ad attaccarsi alle mani (anche con guanti) e si allunga e deforma facilmente mentre la posate. Consiglio di maneggiarla con le palettine fornite nella confezione, assicurandovi che siano ben pulite. Non ho provato altre putty, quindi non posso fare confronti con altri modelli. A causa di queste difficoltà, ho deciso per la seconda applicazione di utilizzare la putty solo nelle VRAM e mettere pad termici tradizionali nei componenti più piccoli o dove l'accesso era difficoltoso.

Ich habe das Thermal Grizzly Putty für meine PowerColor Radeon RX 6800 XT Red Devil gekauft, um die etwas in die Jahre gekommenen Standard-Pads zu ersetzen. ​Anwendung: Das Auftragen anstelle von klassischen Pads ist genial. Man muss keine Angst haben, die falsche Dicke (1mm vs 1.5mm) zu wählen, was bei der 6800 XT oft dazu führt, dass der Kühler keinen richtigen Kontakt zum GPU-Core hat. Das Putty komprimiert sich perfekt und sorgt für optimalen Kontakt überall. ​Ergebnis: ​GPU Hotspot: Vorher ca. [100]°C -> Jetzt maximal [80-85]°C. ​Speichertemperatur (VRAM): Deutlich kühler. ​Lautstärke: Da die Karte nicht mehr thermisch am Limit läuft, bleiben die Lüfter viel ruhiger. ​Für High-End-Karten mit Hitzeproblemen beim Hotspot ist dieses Produkt absolut sein Geld wert. Würde ich jederzeit wieder kaufen.

excelente para poner en un xbox series x

A little pricey as compared to material like Upsiren but performance is really good. Temps went from 95° C to 80° C on GPU Memory and it is easier to work with than compared to the Basic variant.