VK-162 USB GPS Dongle - Remote Mount USB - External GPS Navigation Dongle - Supports Stratux, Raspberry Pi, Google Earth, Windows, Linux

I bought this to use on a Linux NTP server as a local GPS time source. It works perfectly, no special drivers required, just plug in and it works on a modern kernel. Just be aware that there is no PPS output. Generally this is hard to find on USB connected GPS units, so not a huge surprise. Time is still very accurate (compared to another system with a PPS), extremely good enough for any non-scentitic use like managing home or small business network time.

I'm using this with a Raspberry Pi in a ham radio application, keeping the Pi on schedule for FT8. After you set it up properly (Google for the obscure procedure to add a hardware clock), it does the job perfectly well.

This works flawlessly on my HP desktop computer running Windows 11. It manages to spot and sync with satellites immediately after turning on the computer. In under a minute, I was able to set up the device and get the software to synchronize my computer's time with the circling GPS satellites. However, I am disappointed that I have been unable to get it to work on my Microsoft Surface Tablet computer running Windows 11. While the device driver does install, the GPS puck is unable to get a lock on any satellites, so does not synchronize my laptop's time with the many overhead GPS satellites.

The original one that I bought is still working and works every time with no issues. I just bought this second one to carry as a backup as the first one is now 5 years old. My only comment that is negative is that this unit should have a symbol on the bottom that indicates that there is a magnet inside. I understand why some would want a magnet if they are using this for an non-aviation purpose but if you are using this with a stratux or as a GPS for your tablet, be warned, there is a magnet in the bottom of it and needs to be removed. If you put this on your glareshield, it has a very strong potential to alter your magetic compass readings.... the magetic compass is your baseline compass indicator and you should avoid putting any magnets even close to it. The magnet is easy to remove. Peel up the label and it pops right out.

Added this to my victron cerbo to track my rv. It is plug and play and works from inside the trailer. Adding this allows me to see wjere the rv is and provide a solar forcast for my area.

We have a trailer that came with a Victron Cerbo GX system. I plugged this in to the Cerbo and within seconds it automatically fixed a position and worked flawlessly, even while being installed under a bench, without direct line of sight to the sky (much like our phones work). I'm very impressed, and I think every single Victron system owner should have one of these as a means to locate their trailer should it ever be stolen!

This works with Windows 11, but not Windows 8. Stratux - the maker - has a pdf guide on their web site. It directs you to a u-blox web site for drivers. The u-blox site says "Page not found" after following the link. It seems to connect and receive very well though in Windows 11.

I'm just a PC hobbyist with an irrational interest in network and device time synchronization. All the other GPS time gadgets I've looked up were complicated and very expensive. I plugged this in and used BktTimeSync (Windows) but soon discovered I needed to set the proper COM port. Since Widows decides that, you either need to pay attention to the initial Windows device setup notification or look in Device Manager for "Ports (COM & LPT)" and under that, "USB Serial Device (COMX)". The proper COM port will be displayed there in place of the "X". Once I set the COM port in BktTimeSync it immediately synced the PC's time with GPS. I was surprised since I was testing it in the basement which was dumb, but instructional since it worked. So, curiosity has been rewarded. It's quite redundant since NTP is so reliable (called "Internet Time" in Windows) but it's calming to know that my PC network will have accurate time during the inevitable zombie apocalypse (at least until all the satellites die).

You don't need any driver.. But its good to download U-center to check your device.. OR Any application that retrieve the coordinates from this device. I wish it has a led light to indicate GPS fix or something tells you it catches the satellites. Very happy and sure I recommended.

Plugged it into a linux laptop, made sure I had gpsd installed, and then checked with gpsmon. It quickly fixed to a few satellites and the location was correct.

Works with openCPN. Not very intuitive to use if you're not tech savy. I had to fumble a while online and watch video to understand how to set it up. No explanation come with it.

Works as intended. No problems.

Works as advertised, quick GPS lock.