Fanttik S1 APEX Electric Screwdriver Multi-angle Handle 8-torque Settings 0.5-7 N.m Forward/Reverse Switch Type-C Rechargeable 3.7V 2-speed Rotation with 20 Bits Large Capacity Battery Screen

とりあえずの感想としては想像以上に使いやすいです。 特にドライバーを90度まで回転させられる機能は便利です。本体がもうちょっとスリムならなおよしだったのですが。 力の微調整が可能なのもいい点です。普通の組み立てでは３Nくらいの力があれば十分ですが、その倍以上の出力がありますんで通常工具の組み立てでは困ることはないかと思います。さらに力を弱くすればかなり繊細な場所にも対応できるのもよいです。 お値段は少々高いですが、これを1つ持っておけば結構な場所に対応できるので便利です。

とても役に立った、買って良かった。

かっこよくて満足

トルク設定が目に見えて尚且つカッコいい

使用感はよく、初心者でも簡単、安全に扱えるので良いものだと思っていた。しかし使っているうちに、付け替えの先端部が削れて金属片が出てきたので注意が必要かも。素材が結構柔いかも知れない。写真だとズームが必要でだとわかりにくいが、pcのネジを最低トルクで開け閉めしただけで先端部が削れて鉄片が飛び出ている。

耐久性無い 2025/8購入、半年もせずボタンが反応しなくなりました。

Wer einmal diesen elektronischen Schraubenzieher in der Hand hatte, benötigt nie wieder etwas anderes. Er richtet sich vor allem an Personen, die normale Haushaltsschrauben festziehen müssen und dabei die Schraube auf keinen Fall überdrehen dürfen. Meistens sind die normalen Bohrmaschinen viel zu stark. Dieses Gerät vermag es, die Schraube immer genau mit der richtigen Newton - Zahl anzuziehen und es ist dabei, mit dem eingebauten Gelenk, auch viel flexibler einsetzbar. Kraftreserven hat es auch reichlich. Man kann damit auch große Schrauben in dicke Holzbalken drehen, wenn man es eben muss.

Everything just seems to be well made and this product just exudes quality; nice box to hold tool, magnetic latch for easy opening, nice selection of bits, and the screw driver fits my hand very well. Multiple configurations from straight to maybe ~75 degree handle angle make it fairly easy to find a setting that suits the job, but I would've liked it to go to a full 90 degree handle angle. Ring style led light is nice and I feel gives better illumination than single led bulb. Torque is adequate for most household jobs, but not enough to screw wood screws into a piece of hardwood, but then you want something that has more umph for building your deck. There are 8 torque selections from 0.5-7.0 Nm -- Again, this is fine for most household and electronic work but not what you'd want to use for heavy duty projects. Also, the torque settings seem to be fairly accurate but I haven't checked actual calibrations, probably just ballpark for home use. Battery life is more than adequate for this type of device and I never had any issues during my periods of use; also, it charges fairly quickly from USB. However, it doesn't have a removable battery, so you can't just do a swap and charge to keep going for really long stretches. I never had any issues with the button selection for Fwd/Rev or Hi/Lo speed but the workflow (if you've used other electric screw drivers) may take a little adjustment time due to the position of the buttons. I use this mostly for my electronics projects and it's totally fine removing and replacing the case screws, however I have also used it to assemble ikea furniture and it handled that task with aplomb too. The magnetic latch on the storage box works for me but it might not hold as well as a snap latch would if you just toss it in your tool box and it gets rattled around. All-in-all, I'm very happy with this electric screw driver and I would buy it again...Just keep in mind it's limitations and choose the appropriate tool for the job, it's not a heavy duty screw driver.

This product is so well made and intuitive. I didn’t know what to expect, but it really has a lot of torque for most jobs. It has every bit I will need - and the case closes magnetically.

Gutes Werkzeug

Great quality, design, functionality worth the money