Blender Extractor Blade Cross Blade Replacement Parts Compatible with Nutribullet 600W and Pro 900W Series (2 Pack)

Don’t leak like our old ones, secind time I’ve purchased new replacements and these are much better that what I go the 1st time around. The rubber seal is easy to remove and clean with the plastic notch thankfully. It was so difficult on the originals the 1st replacement we used. If harbinger same issues as use (leaks) I highly recommend these, but may consider also getting new cups. I didn’t replace ours and the 2nd issue which I think lead to the main issue of leaking wand that the keep getting cross threaded. So at this point still no leaks, but we have to be careful to make sure they are not cross threading and keeping them screwed on straight.

Out of the 2 blades, one fit just fine, but the second one always leaks and it harder to close.

Funny. I ordered these about a year ago. The first one went out after about 4 months and the second one started getting really loud after about 3 months...but I kept using it for about another 4 month's. I"m guessing it's the bearing that get really loud. So I figured I'd spend more money and buy directly from Nutribullet. The Nutribullet ones came in and the material was softer then these which made the threads bend out when you tightened it on the cups, which also made it leak. It you tried to tighten it down hard it would jump threads. you could also see on the side of the cup that the space between the blades and the cup were not even....there was a space. I tried both the nutribullet blades and they were the same. I called customer service and they are sending me 2 new ones under warranty....though I"m sure these will be the same as the last this is all I could get. Also they woman said not to remove the gasket or this would void the warranty....I'm guessing that the gasket is tighter now and won't let mold and crap grow under it like the last ones....I really didn't have a problem with the older looser fitting gaskets since I would clean they after each use. Actually the newer gaskets are harder to remove and replace. So my point is I also ordered the two blades here and they seemed to be of a stronger plastic and had a better seal the the OEM's. The one thing I did do when I first got the blades was to remove the blade and put some white lithium grease in the shaft and on the gaskets and seals....hoping this will allow it to last longer. If you don't do this when you first get the blades it will be almost impossible to remove the blade because of the reverse threading that tightens after the first use as a blender. Watch out the blades are very sharp so hold it with a glove or rag when removing it. Remember reverse threads. The woman also said don't remove the gasket or it will leak.....I had removed the gasket on both the OEM and this one....the gaskets seem the same but this one did not leak, just make sure it is set down enough....use a butter knife to push it down tight. I'll probably just take the gasket off less often since it is a tighter seal the the older version. It also was not the removal of the gasket that caused the bad fit on the OEM because I had ordered 2 and on the 2nd one I did not remove the gasket and it fit just as bad as the other OEM. Hope this helps....sorry for the long review.

Our Nutribullet blade unit finally destroyed itself but it gave us years of great use. We considered buying a new one and thought maybe we could just buy the blade unit and save money. Well it has worked many times like the original. Very satisfied and saved money!

Very bad product difícult to fit in and remove . I had to send it back .

We use this every day several times a day. About two weeks after purchasing this replacement, it started spewing some liquids out of the bottom. It became difficult to screw it on properly. Then shortly after that the gasket just snapped and spewed liquid all over my kitchen. Also it is very slick and hard to tighten if you have even the slightest moisture on your hands or on the blending portion. It is a very poor design. Our bullet lasted about a year before we needed one of these so obviously 2 weeks is a ridiculous quality! :(

Tighter fit than the original. Also included other replacement parts. Don’t need them now but it’s great to have them as back up.

I bought these to replace a leaky Nutribullet extractor. They are the correct size, fairly sturdy, but very difficult to screw on and off. You have to get it very very tight and there is still some leaking. I think the flaw is in the overall design of the whole machine, but these blades are fine otherwise.

Arrived on time, good fit on the appliance

Schnellere Lieferung als angegeben. Trotz Krise und weiter Entfernung.

Great replacement base for our Nutra bullet blender. Cannot distinguish difference from the OEM base that we replaced.

It pains me to say it but even having two in the pack didn't give me one good replacement for my original blade. I don't think these are genuine, made by Nutribullet blades. I bought for my 900 Pro blender and I couldn't stop them unscrewing when trying to blend. The search goes on for a good, reasonably priced replacement.

Everything runs smoothly.