---
product_id: 323938699
title: "WINSINN 40mm Blower Fan 24V, 3D Printer Micro 24 Volt Fans Blower 4020 Dual Ball Bearing, Brushless Cooling 40mmx20mm 2PIN (Pack of 2Pcs)"
brand: "winsinn"
price: "$U1541"
currency: UYU
in_stock: true
reviews_count: 5
url: https://www.desertcart.uy/products/323938699-winsinn-40mm-blower-fan-24v-3d-printer-micro-24-volt
store_origin: UY
region: Uruguay
---

# WINSINN 40mm Blower Fan 24V, 3D Printer Micro 24 Volt Fans Blower 4020 Dual Ball Bearing, Brushless Cooling 40mmx20mm 2PIN (Pack of 2Pcs)

**Brand:** winsinn
**Price:** $U1541
**Availability:** ✅ In Stock

## Quick Answers

- **What is this?** WINSINN 40mm Blower Fan 24V, 3D Printer Micro 24 Volt Fans Blower 4020 Dual Ball Bearing, Brushless Cooling 40mmx20mm 2PIN (Pack of 2Pcs) by winsinn
- **How much does it cost?** $U1541 with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.uy](https://www.desertcart.uy/products/323938699-winsinn-40mm-blower-fan-24v-3d-printer-micro-24-volt)

## Best For

- winsinn enthusiasts

## Why This Product

- Trusted winsinn brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

WINSINN 40mm Blower Fan 24V, 3D Printer Micro 24 Volt Fans Blower 4020 Dual Ball Bearing, Brushless Cooling 40mmx20mm 2PIN (Pack of 2Pcs)

## Features

- ✔️WINSINN 40mm blower fan 24V which micro size and lightweight design, suitable for 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place.
- ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours.
- ✔️Rated Voltage: DC 24V, Current: 0.09A, Power: 0.96W, Speed: 6500PRM, Air Pressure: 8.34mmH₂O, Airflow: 3.5CFM, Noise: 33.4dBA
- ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pi / TV box / VR glasses and any small electronic equipment cooling ventilation.
- ✔️Packing List: 2 x 40mm Blower Fan - 24v - Dual Ball Bearings, Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 20mm

## Product Details

- **Product Dimensions:** 1.57"L x 0.79"W x 1.57"H
- **Brand:** WINSINN
- **Power Connector Type:** 2-Pin
- **Voltage:** 24 Volts
- **Cooling Method:** Air
- **Compatible Devices:** Desktop, Printer
- **Noise Level:** 33.4 dB
- **Material:** Plastic
- **Maximum Rotational Speed:** 6500 RPM
- **Air Flow Capacity:** 3.5 Cubic Feet Per Minute

## Images

![WINSINN 40mm Blower Fan 24V, 3D Printer Micro 24 Volt Fans Blower 4020 Dual Ball Bearing, Brushless Cooling 40mmx20mm 2PIN (Pack of 2Pcs) - Image 1](https://m.media-amazon.com/images/I/61BWDn2+y1L.jpg)

## Available Options

This product comes in different **Style** options.

## Customer Reviews

### ⭐ 







  
  
    Typical Winsinn Fans, Useless Junk
  

*by N***P on Reviewed in the United States 🇺🇸 on 7 May 2021*

These fans are horrible. I was going to use them for a 3D print head, but they sounded like a miniature jet engine and had horrible vibrations. I could tolerate the noise, but thr vibration was severe, and it would not work for my intended use. I ordered a recplement set, but they were also very loud and shaky. Ended up returning both.Avoid these fans if you don't want noise or vibration. It seems like every fan (including some 3010 and 4010 box fans) I have gotten from this seller has been really poor quality. The performance needed just isn't there. I would buy noctua fans if they made 24V models.

### ⭐⭐ 







  
  
    The wires on them are junk
  

*by A***R on Reviewed in the United States 🇺🇸 on 9 September 2021*

Fans both worked but the wires on them both broke off in very short order at the circuit board under the stickers.  I'm pretty decent at soldiering so I replaced the wires with better quality 24ga silicon wire which solved the problem but its a bit small and fiddley to do if you don't have good soldering iron and a steady hand.  If you can't solder shop elsewhere they really are not that good even the dual row bb ones.  Problem is there is little choice unless you want to pay $20 a fan from somewhere like digikey or wait a month for something to come from china that might be the same crummy quality.  I will say they do blow air fairly well and if you keep them around 50% of their max rpm they are liveable until you can get something better for your 3d printer.  They fit the vorob 2.4 print head perfectly btw

### ⭐⭐⭐⭐ 







  
  
    Much louder than original from 3d printer
  

*by M***M on Reviewed in the United States 🇺🇸 on 2 September 2021*

This thing blows like it says but is much louder than original from 3d printer. I know they claim to use dual ball bearings but that is not evident without tearing it apart. The standard 40mm fans that claimed to have dual ball bearings (same brand) died in less than a month of use and upon disection no ball bearings were found just the standard bushings. This blower has lasted several months so maybe it does have the ball bearings but... All in all I give it 4 stars. Price was good but noise level lost it a star.

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.uy/products/323938699-winsinn-40mm-blower-fan-24v-3d-printer-micro-24-volt](https://www.desertcart.uy/products/323938699-winsinn-40mm-blower-fan-24v-3d-printer-micro-24-volt)

---

*Product available on Desertcart Uruguay*
*Store origin: UY*
*Last updated: 2026-03-07*