--- product_id: 76470216 title: "Minwax 33060 Fast-Drying Polyurethane, Satin Finish" brand: "minwax" price: "$U2442" currency: UYU in_stock: true reviews_count: 5 category: "Minwax" url: https://www.desertcart.uy/products/76470216-minwax-33060-fast-drying-polyurethane-satin-finish store_origin: UY region: Uruguay --- # Minwax 33060 Fast-Drying Polyurethane, Satin Finish **Brand:** minwax **Price:** $U2442 **Availability:** ✅ In Stock ## Quick Answers - **What is this?** Minwax 33060 Fast-Drying Polyurethane, Satin Finish by minwax - **How much does it cost?** $U2442 with free shipping - **Is it available?** Yes, in stock and ready to ship - **Where can I buy it?** [www.desertcart.uy](https://www.desertcart.uy/products/76470216-minwax-33060-fast-drying-polyurethane-satin-finish) ## Best For - minwax enthusiasts ## Why This Product - Trusted minwax brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Description Keep interior wood projects looking beautiful with Minwax Polyurethane Wood Finish Aerosol Spray. This oil-based clear sealer protective coating protects and adds long-lasting beauty to woodwork, furniture, doors, cabinets and floors. The clear top coat is one of the most durable coatings for wood protection against scratches, spills and more. It can be used on both finished and unfinished wood projects, and is available in a variety of sheens. The fast-drying formula allows for quick recoats in 4-6 hours. Application Directions: 1. Surface must be dry and free of old finishes in poor condition, paint, wax, grease, polish, dirt or other foreign matter.2. Sand to obtain a smooth uniform surface. Remove all dust.3. If desired, apply Minwax stain to unfinished wood surfaces. Follow directions for application and dry times.4. Shake Minwax Fast-Drying Polyurethane vigorously for two minutes. Shake for 10 seconds occasionally during use. 5. Protect adjacent areas from overspray. Wet overspray can be removed with mineral spirits.6. Hold can vertically 12 inches from surface. Depress button fully and spray using an even, sweeping motion with slightly overlapping strokes. On unfinished wood, apply sufficient material to seal open joints, edges and end-grain.7. Apply a THIN coat to avoid runs and sags. Recoat within 2 hours. If unable to do so, wait a minimum of 72 hours, then lightly sand and recoat.8. Apply at least three coats on unfinished wood and two coats on surfaces already finished.9. After final coat, allow 24 hours before normal use. Review: Good stuff Review: horrible ## Technical Specifications | Specification | Value | |---------------|-------| | ASIN | B002PNXU52 | | Brand | Minwax | | Brand Name | Minwax | | Compatible Material | Wood | | Coverage | provides long-lasting protection for wood surfaces against various types of damage | | Customer Reviews | 4.7 out of 5 stars 2,039 Reviews | | Finish Type | Satin | | Item Form | Aerosol | | Item Type Name | Fast Drying Polyurethane | | Item Weight | 0.9 Pounds | | Liquid Volume | 11.5 Fluid Ounces | | Manufacturer | Minwax | | Manufacturer Part Number | 33060000 | | Material | Polyurethane (PU) | | Material Type | Polyurethane (PU) | | Model Number | MINWAX - 027426330603 | | Product Finish Type | Satin | | Recommended Uses For Product | Interior | | UPC | 027426330603 | | Unit Count | 326 Grams | ## Product Details - **Brand:** Minwax - **Finish Type:** Satin - **Item Weight:** 408 g - **Material:** Polyurethane (PU) - **Recommended Uses For Product:** Interior ## Images ![Minwax 33060 Fast-Drying Polyurethane, Satin Finish - Image 1](https://m.media-amazon.com/images/I/61LD4Qup+cL.jpg) ![Minwax 33060 Fast-Drying Polyurethane, Satin Finish - Image 2](https://m.media-amazon.com/images/I/81imVVYm-hL.jpg) ![Minwax 33060 Fast-Drying Polyurethane, Satin Finish - Image 3](https://m.media-amazon.com/images/I/819HUMZKx+L.jpg) ![Minwax 33060 Fast-Drying Polyurethane, Satin Finish - Image 4](https://m.media-amazon.com/images/I/81Cpx6nvUxL.jpg) ![Minwax 33060 Fast-Drying Polyurethane, Satin Finish - Image 5](https://m.media-amazon.com/images/I/81mxRhH0fAL.jpg) ## Questions & Answers **Q: what the difference between this and the polycrylic??** A: I use both for different reasons. This oil base is more durable against wear and water rings than polycrylic for things like table tops and countertops. It is easier to get a smooth finish when brushing because it dries slower and flows out flatter. It WILL impart a warm, yellowish finish that is visible on lighter woods, and it will create a darker patina with age. It gives a warm, amber glow to medium or dark wood finishes. This quality may or may not be desirable. It usually only requires two coats. Use it for durability, a warm, aged patina, and ease of application towards a smooth finish. Polycrylic is not as durable and can show "elbow wear" on table tops after a few year. It will stay crystal clear on white woods, but can impart a milky sheen on darker woods. It dries fast, so you can sand between coats much quicker than oil. However, that can make it tricky to brush it on and get a smooth finish, especially if you brush back over it when it gets tacky. It requires minimum of 3 coats, 4 for long durability. on wearable surfaces Use it when you need a crystal clear finish on light colored woods, and fast drying between coats is desired. **Q: Will it be very shine and smooth for the surface after I use? thanks** A: Yes. I recommend first using a 600 grit sandpaper to lightly remove old finish. Remove all dust with a damp cloth, and then lightly spray on first coat (Thin coat best). Wait 24 hours to dry. Next lightly sand using a 1500 grit sandpaper, remove all dust with a damp cloth, and then lightly spray on first coat (Thin coat best). Repeat this step two more times. Glass feel may require additional applications. Remember thin coats. PS: If you choose the brush method, do not use sponge brushes since it is more likely to leave bubbles, use a good quality sable hair brush. I did a bar top decades ago applying clear polyurethane with about 20 thin coats in the first year about once every other week and I left a penny at the end of the top and coated over it until it disappeared ant the bar top was so smooth. The top was red mahogany that is probably still a luster for the new owner. I could slide a bear from one end to the other end. **Q: Can this be used on floors?** A: Yes, this oil based polyurethane fast drying is absolutely engineered for hardwood floor and definitely in high traffic areas. I used the water based polyurethane in the dining room and this is the hallways, this looks so good and is holding up better than expected. **Q: what is the best way to apply this** A: Use a bristled brush. Those sponge brushes leave bubbles in it. ## Customer Reviews ### ⭐⭐⭐⭐⭐ Good stuff *by G***E on 3 January 2026* ### ⭐⭐ horrible *by D***A on 25 January 2024* ### ⭐⭐⭐⭐⭐ good quality *by D***T on 28 January 2026* ## Frequently Bought Together - Minwax Fast Drying Polyurethane Spray, Protective Wood Finish, Warm Satin, 11.5 oz. Aerosol Can - Minwax Fast Drying Polyurethane Spray, Protective Wood Finish, Clear/Warm Gloss, 11.5 oz. Aerosol Can ( Packaging May Vary) - Minwax Fast Drying Polyurethane Spray, Protective Wood Finish, Clear Semi-Gloss, 11.5 oz. Aerosol Can(Packaging May Vary) --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.uy/products/76470216-minwax-33060-fast-drying-polyurethane-satin-finish](https://www.desertcart.uy/products/76470216-minwax-33060-fast-drying-polyurethane-satin-finish) --- *Product available on Desertcart Uruguay* *Store origin: UY* *Last updated: 2026-04-23*