Viozon Monitor and Laptop Mount, 2-in-1 Adjustable Dual Arm Desk Mounts Single Desk Arm Stand/Holder for 17 to 32 Inch LCD Computer Screens, Extra Tray Fits 12 to 17 inch Laptops (Silver)

I did a ton of research and read countless reviews before deciding on the Viozon OL-3L. I’m extremely pleased with my decision! The quality of the product is fantastic, instructions were easy to follow and understand, and the finished result is exactly as I had hoped it would be. You can tell that a lot of thought went into this design, making it sturdy, easy to assemble and added features such as the cable covers and clips. Overall, I would highly recommend this product to anyone, and will be purchasing a second one for my office! A few tips that I would recommend are: 1 - Make sure that you have enough of a lip/edge on your desk. The wing nuts that are used to clamp the mount on the desk are pretty wide and the bolts are long. I was unable to mount it completely flush against my desk because of this. Fortunately it wasn’t a deal breaker and is still very secure. 2 - Read the instructions thoroughly BEFORE you begin and lay out the hardware, ensuring the correct position of installation. I even went as far as labeling the hardware with the corresponding letter ahead of time to ensure accuracy, as this was not done in the instructions. Also, you will not need any additional tools, everything you need is provide. 3 - Go ahead and mount the monitor bracket to the monitor before starting the desk installation. I found that doing this first was easier. Also, as I read in other people’s comments, don’t be surprised if the monitor mount looks crooked after installation. I was concerned of this when I read the reviews - and I did in fact have the same issue. The good news is that the arms have 3 points of adjustment, so you will easily be able to straighten and customize the angle of both, the monitor & laptop. The tension adjustment points, especially “The Adapter (E)”, intentionally have quite a bit of tension, making you think they can’t be moved, but they can - check out Step 6 of the instructions. 4 - The positions will feel a bit off at first when you initially get everything set up. You will need to play around with it until you get the desired positioning.

I am completely happy with this Viozon Computer and Laptop Mount. It is exactly what I needed to get my monitor and laptop off the desk. I was concerned with some of the reviews, and want to reassure others. 1. The brackets that hold the laptop to the laptop shelf do not block either a MacBook or Dell PC ports—not at all. The brackets are only 1/3 up from the bottom and both laptops' ports are in the top 1/2 of the laptop. (One reviewer showed a photo of a PC that is a few years old and the ports on it were being blocked. My 4 year old Dell XPS 15 and my 2020 MacBook Pro both fit the shelf fine.) 2. The VESA mount has been modified by Viozon so it fits LG monitors. LG has the screw holes in a depression, and the VESA mount has been designed to fit this. No trouble at all screwing the mount into the back of my 32" LG monitor. (Several people complained they could not attache their LG monitor.) 3. Several reviews complained the VESA mount was crooked, so when the monitor is mounted it is crooked. My monitor was also crooked until I sat down in front of it and swiveled it. It easily swivels so it can be straightened, and it stays where I want it to stay. I don't know if they redesigned the mount, or what. But it sets up perfect. 4. Some reviews complained the laptop shelf moved too much to type on it. That is probably true for most, but does not affect me. I have a MacBook Pro and a Dell XPS 15. I use an external keyboard (Logitech K850) and mouse (Logitech M720). These two devices can be paired with 3 computers (or 2 computers and a phone). So I never type on my computer's keyboard unless I am traveling with it/them. The Dell sits on the mount shelf and the MacBook sits on another shelf. Both are to the side and my formerly cluttered desk is free. In the photo the grey switch on the desk between the MacBook and the left speaker is an "ezcoo HDMI 2.0 switch 4x1." Both laptops connect to it by HDMI, and it connects to the monitor. I switch between 1 and 2, depending on which laptop I want to appear on the monitor. Then I press a button on the keyboard and one on the mouse to switch control to that laptop. Easy-peasy. 5. I read 2 reviews complaining the monitor mount would not hold a large monitor, and the monitor leaned forward. I have a 32" LG monitor attached, and after 3 days it has not moved at all. I feels very secure. I am completely happy with this purchase. I will update this if something changes.

I have bought two of the Monitor and Laptop Mount, 2-in-1 Adjustable Dual Arm Desk Mounts (non-gas versions) in a span of about a year. The first one I received was great, I love it; 5 stars if I would have written a review back then. These mounts work well for what they are and I like their adjustability and how well they keep their locking power once you get the screws tightened up. The cable management feature is nice but I don't use it. I tried to use it but didn't work out for me; not something I would knock stars off for. Now, since I loved my first mount, I decided to get a second pair. My disclaimer up front, I did buy this as what looks like a returned item so it could be that I am drew a bad card. But to be clear, I'm not knocking points for the scratches that I already expected and am ok with. My issue is the change in the "quick vesa" mount mechanism that I got with my second stand. The mechanism is completely different. I've uploaded a video to show everyone what I mean, but the short of it is that my new laptop tray is wobbly. I'm not sure if it something in the design tolerance or of they did this on purpose but it has some slop. My original stand "quick vesa" mounting mechanism is WAY tighter. Admittedly, the original quick adapter is slightly harder to pull out but I find that ok. It's not like I'm swapping out often. Perhaps this is why they decided to make the change to a "looser" mechanism? This wobbly-ness isn't that big a deal but it did bother me enough to write the review and post the video. It's not bad on the monitor since the monitor is on the vertical plane and its weight keeps it sturdier; my slight grief is with the laptop side. So yeah, I recommend this product with that caveat but I would have been more enthusiastic about recommending it if I would have received the same original hardware from the first time. I get it, manufacturers change for x or y reason but if the wobble factor is something that bothers you, then you can either try your luck or look elsewhere. Again, I did buy one that was not new. However, I doubt that this has anything to do with it because both new vesa quick mounts have this wobble factor. As a workaround, I cut and folded some paper and put it in the receiving end to close the gap.

I am so happy that I got this mount. I got my new desk and was afraid that if I just put the monitor on it like normal, it would take up way too much space. When I’m sitting at my desk, I connect my Surface Pro to my monitor to have two screens, and the laptop mount arm is perfect for my Surface Pro! I do use a pen drive for a good portion of my storage, so for a little while I was using a pen to give it a little more height so that the pen drive would clear that side clasp, but I realized that I’d I leave the keyboard attached and fold it behind it, it takes care of that issue. Another small issue is that clasp holds on to it right at the end of where my charger plugs into it, but I’m actually able to plug the charger in and allow the clasp to hold on to the end of the charger as well, so that was good. The clasps are tight enough to hold it but not so tight it squeezes it. It was fairly easy to assemble. The directions were confusing and it took me longer than it should have to put it together because of that confusion. But I figured it out and got it working. It seems very sturdy and I like that I can adjust the tensions of the moving parts as I see fit. I am very glad I got this mount and I highly recommend it!

I always wanted to have a computer display stand and a laptop stand until viozon products perfectly solved my problem. I searched a bunch of those stand, but usually they are pretty ugly. I really want something looks good (high end), and sturdy with great quality, since majority of my time is spending on the screens. My problem really solved until I found Viozon. This Viozon mount looks astounding. Pretty elegant, with silver cover, goes pretty well with Mac. It's also feels very sturdy, reliable, definetly not some cheap stuff. It holds both laptop and additional screen really nice. Now I could really enjoy my time at my desk. I believe the material is high quality aluminum. The hinge can move what ever I wanted to be. I also really love the good wiring system which make everything very neat. It was also pretty easy and straightforward to setup the mount. I like it. I think it's great. I recommended to a bunch of my colleagues. They are pretty interested and impressed.

Nice product at a decent price. The installation instructions are very basic but still difficult to follow. I highly recommend watching the installation video referenced in the instructions....makes much more sense. This product does as promised however one downside is that it seems to be made for a larger desk. My desk is 24” x 48”, and against a wall. The arms are too long for a decent set up, so I have to pull the desk out a bit. Not really a big issue but still a little inconvenient. The laptop arm is pretty much a novelty. You can get the same result with a $25 laptop stand though. Still, it IS unique as I’ve never seen a product like this before. It seems sturdy...good quality and I have no concerns it will break apart. If I had a bigger desk I’d rate this product higher, since I don’t...solid 3.

I bought two of these units, one for my wife's standing desk and another for my own. Both were super easy to set up, had good wire management, and are sturdy enough. Adjusting the position, horizontally, is quite easy but for anyone who anticipates changing the height of either the monitor or laptop often, I recommend spending a bit more for a gas-spring unit. Though the quick release mounts were helpful during installation, they don't seem too useful beyond that. I do like how you can adjust the preload on almost every joint to make some positions fixed and others reposition able. Overall a really nice unit, especially for a standing desk!

Having owned 6 different monitor mounts in the past I can honestly say the build quality, look and usability of this Viozon mount is a cut above the rest. I purchased the combination laptop and monitor mount and is it simple to install, very steady connection with the desk, good adjustment ability for height and positioning, a nice spring loaded mount to keep your laptop safe, a lovely finish on the materials and good cable guide to reduce clutter. I will definitely buy again.

n'est pas conçu pour des portables plus grand que 15,6 pouces, j'en ai poser un de 17 pouces dessus et ça tient par enchantement, en plus il a fallut mettre le bras a l'envers sinon le portable se retrouve tellement haut qu'il est impossible de l'utiliser. Ça fait le job mais d'autres marques sont plus joli et plus pratique.

Je n’ai qu’un mot et c’est wow! C’est complètement fou l’espace sauvé sur le bureau. Qui plus est, l’installation d’une simplicité déconcertante offre une ergonomie beaucoup mieux adaptée. Pourquoi ai-je attendu si longtemps?!?!

The joint at the back holds the screen in position through tightening the joint with the provided allen key. Unfortunately regardless how hard you tighten this, friction alone wont hold the monitor and it droops down. Tried to hold it in place with som cardboard as a temporary measure. Easily fixable for the manufacturer to use a ratchet system that you tightened too. You wouldn't simply be able to tilt then, and need to release, position tighten each time, but thats workable for a stable solution. So far not tried the laptop tray with my 16" Macbook Pro, but could see same issue on that arm. for now using for iPad only. If you have something like a Macbook Air and a smaller lighter monitor, will probably work well.

This stand has been great! Very sturdy and no dipping as of yet. I’ve had it about 6 months now, with a 32 inch screen and Laptop hanging on it.

Eficienta espacio