TS-T15 3/4" 120 W Max Power, Polyester Fiber Soft Dome - Tweeter (pair)

Replaced my factory dash tweeters in my 2014 Kia Soul and WOW! What a difference in sound! The value of these is incredible! My factory system sounds upgraded with just swapping these out. Make sure you use a bass blocker if not already present in system. Really happy with the 10 minute install and the better sound!

I have a 2001 ram 1500 in which i installed a ds18 head unit and 2 pioneer 6x9s for the front doors and 2 = pioneer 6.5s in the back doors , the speakers were placed pretty low from the factory and had the infinity sound system , the only thing I kept from the original system were the infinity tweeters that were up on the A pillars , sounded ok but decided to get these pioneer TS- T15 3/4" 120w tweeters I thought it sounded really awesome before and now its just sounds totally epic , the range on these speakers are astounding, Now , installation was not a simple plug and play if you want to make them sound the best that they were made for , there are 2 resisters that come in the complete installation package, which includes the tweeters already connected to wires, 2 brackets and has a couple ways you can mount them like a pro , surface or inset, you'll need to solder the resister to the stripped wire ,one prong of the resister to the striped speaker wire and the other to the stripped speaker wire coming from the stereo , there is some instructions in the box that shows this in an illustration, once you do that, go ahead and put some black cloth electrical tape around the exposed wires or use heat shrink , to keep the conductors from touching and isolate them from each other . Im so pleased with these that vive decided to installnthem on all my vehicles, you will not regret this purchase if you install them correctly. Enjoy .

These are quality tweeters and fit right into the original stock position on my Lexus. Slight modifications with the original bracket of the original tweeter and BOOM! Sounds great and it's tucked away clean, out of sight! Pioneer quality, enough said!

When I ordered them, they were the wrong speaker for what I needed. I obviously don't know a tweeter from a 2 inch dash speaker. I also ordered connectors which were the wrong ones. But I'm not one to return something. After cutting up the old speaker, placing the tweeter inside so id be able to mount it down and hard wiring them in, they turned out to be amazing tweeters. They are louder and more clear than the stock 6x9s I'll be replacing shortly. Amazing tweeters id buy them again and again.

Installed these to replace a set of dead ones on a 2004 Colorado. As the factory ones were dead, I have no reference to compare the audio quality too. However, installation was a breeze, I ended up just cutting out the grill of the factory tweeters with a pocket knife. It was a perfect fit, and the cup mount for the Pioneer tweeters slipped right into the void like it was made for it. A couple dabs of super glue around the rim and it’s perfect. As far as audio goes, they are a bit tinny for my taste. I know they’re obviously only for high frequency, but I often still feel that they’re a little shrill. However, all in all, they’re a great addition to round-out the whole system. As far as comparing to other tweeters, I really couldn’t tell you where they land. But when compared to a system with NO tweeters, these are a huge upgrade. I’m really happy with them!

This is not just a plug and play setup. You'll need heat shrink connectors, heat shrink sleeving, potentially a wiring diagram, electrical tape, likely a dremel for fabrication, soldering gun, heat gun, knowledge on polarity and working understanding of capacitors and how to solder. I had no idea what I was getting myself into. 3 stars for sound quality but this was not easy and I'm an ex aircraft mechanic. End product was pretty good for the cost.

I haven't installed them yet so I can't comment on sound qty, but, just from looking at them, worth noting, You see that ring around the tweeter? If you think you can separate that from the actual tweeter, and there-by fit it into a smaller cutout, be advised, it is glued in. and not in such a way as you might "exacto-knife" it out. IF it's going under the grill, so you don't care what it looks like, and you need it to be SMALLER probably your only route will be to put the outer ring to a grinder or dremel-tool-it. The listed 1-1/2" diameter includes that ring. Without it it's roughly, .8 to1.1" MY CUT-OUT is supposed to be 1-1/2" so I'm just saying, because the listing doesn't make it clear if that ring comes off. It doesn't. I gave it 5S based on packing, speed of service, and I got a good price, and on faith. MEANING I'LL BE BACK if it turns out that faith was not deserved.

El producto es de buena calidad y recomiendo su campra .

Tienen muy buen sonido y no son chillones pero uno de ellos ya se descompuso y reclamar la garantia es un rollo, aqui en mexicali no hay centro de atencion. enviarlos a reparar sale casi lo mismo que lo que me costaron y no se si me vayan a hacer valida la garantia.

Im powering them off a stock mazda 3 deck im waiting for my pioneer double din

I was looking for some tweeters which would sound good and fit into the same openings as my stock speakers. These fit the bill and they look good too. The metal screen allows them to be exposed to sunlight without long term damage.