Elysian Slide-Out Tray Organizer, 32" W × 21" D Pull-Out Cabinet Drawer with Full-Extension 35mm Ball-Bearing Rails, Roll-Out Storage Shelf for Kitchen Base Cabinets

I used this drawer to retro fit an opening that had a trash compacter and make it into a cabinet. The product arrived intact and was well packaged with cardboard, styrofoam, and clear bags separating and protecting the various pieces. The wood on the drawer is decent quality although one dovetail was a knot. The fit was good and the dovetail is a creative design enabled glueless DIY assembly. One joint was a tad deep meaning the siderail went further than it should into the front panel but it remained secure when I pushed it to be plush. The extension glides are good quality and I was pleased that the connecters to attach the rear of the glide to the back of the cabinet were 1) long and 2) metal. The instructions could be modestly better by noted that the use of a rubber mallet should be buffered so the wood is marked or damaged, by explaining how to disconnect the rail affixed to the drawer from the other two extension pieces in more detail and by describing the orientation of the extension rail to the drawer but this can be deduced from the illustrations. The instructions were also silent on ensuring the two rails were level and assumed the cabinet was the standard width and gaps which mine was not. All in all I am pleased with the product and feel it was a good value.

I had a bad run with my original order as well as second order as Amazon send the 30 inch instead of 33 inch drawers. By the time I realized one box was already in recycling as I unboxed it and tried to see how it will look only to find out the wrong size was send. To return I had to send it back in original box, which I didn't have. I contacted Elysian. What a super nice company that stands by their products. Calvin immediately emailed back and after a few back and forth and another wrong order (Amazon's fault, not the company), I returned all to the company, they refunded the wrong ones and they send me back the correct ones in a short amount of time. This is the drawers installed and I am more that thrilled. Easy to install, back breaking, climbing in to cabinets, but easy really. It opens easy and is perfect. Will definately order more. Quality is great and it fits perfect with my maple cabinets. So glad I went with this company.

I'm delighted with this item. It is well made and easy to assemble. Installing it inside a kitchen cabinet might be a little challenging for me, an amateur carpenter. It is far better quality than the cabinet mechanisms installed by my homebuilder, but to their credit the lower quality ones have survived 28 years. I used a rubber mallet to press the drawer sides together. This item has solid ball-bearing steel drawer slides and will most likely outlast me. I would buy from this company again to replace my old drawers. Price was a bit steep, but the quality justifies the price.

Love these for by cabinets. Installation was very easy

Solid and quality. As expected

I have now purchased and installed 8 of these drawers. I have completely outfitted my entire kitchen. First, they look great. So good they look like they're original to the cabinetry. They're made with quality materials as well. Second, the improved functionality of the kitchen cannot be underestimated. I am actually able to see everything in my cabinets which dramatically improves my efficiency in the kitchen and ensures that stuff doesn't get lost in the back forever. Some things to keep in mind. The 33 inch drawers have a spacer included in the box to make them fit your cabinets better. It's great but I wish they were like 2mm wider for my cabinets. In some cases I couldn't get the two sides of the glides to match so I had to shim them. I also think the company could include at least a few more screws. I like things to be in tight especially if they're going to be holding alot of weight. For installation I 3d printed some spacers about 4mm tall so that I could mount the slide easily at the bottom of the cabinet and I would know it was going to clear the front and this strategy worked out perfectly. For the middle drawers I 3d printed shelf pegs and I laid the spacer piece on top of those and this allowed me to very easily get a perfectly level install. It was alot of work to do the whole kitchen and kind of expensive but I have no doubt I've also increased the value of my kitchen as well.

I decided to add roll out drawers to an existing pantry cabinet. This is the review of one of three different products (same size drawer) I purchased to complete the project. When the product arrived the drawer pieces (which I knew was going to be not assembled) were packaged in plain brown cardboard. There was nothing to identify who made this item or where it came from other than I knew I got it from Amazon. The only information on this product is on the Amazon website. It also states “by Elysian” but if you click on that link all you get is a website that sells a lot of stuff and I couldn't find this drawer. It was well packaged though. The instructions were very little help. Item 1 says “Assemble the Drawer box.” That's it. You will need a hammer or mallet and wood glue to put it together. The drawer pieces are also unfinished. You will need seal coat or finish paint in some form or manner. I would also suggest letting the drawer set overnight to allow the glue to set up before attaching the slides. The rest of the instructions aren't real helpful. There are some photos for guidance but are quite small so you can't really see any detail. I relied more on my handy man expertise to compete the rest of the assembly required. The drawer slide provided is 19 5/8 inches long and the rear bracket that the slide fits into is 3 13/16 inches long. Well, the standard dimensions of a 24 inch deep cabinet from the face of the cabinet to the back of the wall is 23 ½ inches. Guess what! The slide and bracket aren't long enough. I got a piece of 2X4 and attached it to the back wall for a stand-off. This allowed enough of the slide to fit into the bracket for sufficient support. As I mentioned this drawer was one of three different products that I purchased. The other two each came in boxes like you would find in a store easily identifying the manufacture which was helpful in getting additional information. These products were also completely assembled, and finished coated. They also fit up properly. They were also each about 10 dollars more than this product. For all the additional work required this product is not worth the money saved. Another note. All three products had full extension drawer slides. But the other two were self closing and this one was not. I would not buy this product again. I gave it three stars because it at least worked when I got it installed.

I needed these to save my back and wrists. Perfect product. Super easy to install and slides easy put doesn’t glide to fast either. Fits perfectly in my cabinets and stores more than I would’ve been able to without them!

Like the functionality and the look. A little tricky to fit exactly into the space. Had to add shims on the door front side to bypass the cabinet door when pulling out. Simple fix !!

Excellent quality, easy to assemble and install. Looks like it was professionally installed with my custom cabinets. I will definitely be ordering more.

A solid product. A bit finicky for installation. Make sure to measure twice!

I ordered this product for my pantry cupboard, the product was delivered more quickly than expected, awesome. Unfortunately it didn’t fit my space. I was very sad as this is exactly what I was looking for. Return was super easy and the refund was very quick. I would recommend this seller, but I can’t say much about the product as I didn’t get to use it.