Tripp Lite USB to PS/2 Adapter - Keyboard and Mouse (B015-000)

Adapter works with IBM Model M Keyboards. ONLY WORKED FOR ME BY PLUGGING USB INTO LAPTOP DIRECTLY...NO HUBS POWERED OR NOT WORKED FOR ME. Works with Win 10 Build 1803 as of 10/15/18. To get the adapter to work in Win 10 you have to disable Fast Startup Option in the operating system. First, open up your power options by hitting Windows+X or right-clicking your Start menu and selecting Power Options. In the Power Options window, click “Choose what the power buttons do.” Click “Change settings that are currently unavailable” to make the Fast Startup option available for configuration. Scroll to the bottom of the window and you should see “Turn on fast startup (recommended),” along with other shutdown settings. Just use the check box to enable or disable Fast Startup. DISABLE IT. Save your changes and shut down your system to test it out. If you don’t see the option at all, it means hibernation is not enabled on your machine. In this case, the only shutdown options you’ll see are Sleep and Lock. The quickest way to enable hibernation is to close the power settings window and then hit Windows+X and open Command Prompt (Admin). At the Command Prompt, type the command: powercfg /hibernate on After turning hibernate on, run through the steps again and you should see both the Hibernate and Fast Startup options.

I work in computers for a living and while I can tolerate a laptop keyboard, I have a IBM Type-M Model M13 for most of my productivity work. I recently purchased a MacBook Pro and need a way to connect this PS/2 keyboard to it. This adapter did the trick. Plug it in and start working. No drivers to install. This is a great option to use some of the more legacy keyboards on newer hardware that lacks PS/2 support. I've tested this on Windows, macOS, and Linux without any issues. Lastly, no issues remapping keys. I like to have a traditional UNIX keyboard where control and caps lock keys are swapped.

WORKS GOOD OVERALL. BUT IF TYPING FAST OR USING THE KEYBOARD FOR A PC GAME THERE CAN BE OCCASIONAL DELAYED RESPONSES FROM KEY STROKES.

These saved me, big-time! Before buying this product I used 3 other different types of "converters" that were strait pass thru's (no little box on the cord, just strait cords or just strait adapters). The problem was the straight pass-thru's did not work on certain computers while using my KVM switch. Although the standard converters worked with some of my WinXP and WIN7 computers, I had 2 WIN7 computers where the standard pass thru converters just would not work. It's weird, because one of the computers that worked and one that didn't were both the exact same Dell Machine (both WIN7). They were bought at the same time (basically identical). But on the one Dell that didn't work, the Win7 OS had just been re-installed at the computer store. THE GOOD NEWS, when I plugged in these Real Converters (with the little box), they worked with NO PROBLEMS. I did have to re-boot 1 time to get them working, but after that, the mice and keyboards worked perfectly! Life saver!

UPDATE: It turns out the issue with the mouse pointer freezing was actually a software problem relating to my computer's graphics driver. As a result, I've increased my rating to 5 stars as this adapter was not the cause of the issue. The original review is kept below, but keep in mind the issue mentioned no longer occurs. You can't go wrong with Tripp Lite, and this PS/2 adapter nearly lives up to its brand. The build quality is excellent and certainly what I'd expect from a Tripp Lite product. However, I can't help but notice that my PS/2 mouse will occasionally stop responding for a split second, which causes the cursor to stop until you move it around a bit. I haven't been able to reliably reproduce the issue but I know the mouse works fine with another PC in PS/2 mode. I'm not terribly bothered by it since I don't use it all that often and it only rarely happens. Other than this minor hitch, everything else works exactly as expected. Setup was trivial, everything was plug-and-play. The cables are plenty long enough to reach wherever I needed them, and the converter "box" in the middle is super compact. Overall an almost perfect product, but it's good enough for me.

Of all the PS/2 to USB adapters on Amazon, this was the only one that actually works correctly with an IBM Model M keyboard, correctly performing n-key rollover and mapping all keys correctly. However, it has a tendency to hard reset (all the lights on the keyboard blink and it doesn't accept input for perhaps one second) in the middle of use maybe three or four times a day. I've had it replaced twice thinking it might be poor QA or a bad batch, but the problem persists.

I'm a big fan of the old IBM model M "clicky" keyboards, as my typing is very noticeably better when using them. I first bought a similar "cheapie" USB keyboard/mouse adapter from eBay. It worked, but several times a day it would get into a mode where it would quickly repeat the last keypress over and over, it was extremely annoying. Got this one, plugged it in (Windows 10 system), and it worked fine. No problems at all after using it for several weeks now.

Unfortunately, my new laptop dock did not have PS/2. This works flawlessly with my IBM model M keyboard. Unlike the cheap no-name stuff I've been using before, it does not glitch/hang buttons/stop working at random times. If you can't use PS/2, this looks like the next best thing. I'll update this review if it should stop working correctly at a later time.

Works, helped me connect a new Dell server to an older style KVM switch.

Excelente producto y muy buena calidad y duración

La longitud de los cables es satisfactorio y, tanto el material como los acabados se perciben resistentes. He conectado 2 teclados antiguos y Windows 10 me los ha reconocido sin problema. Lo recomiiendo ampliamente.

I tried using ps/2 to USB individual adapters and did not work, this adapter recommended by Tripplite in KVM instructions.. Works perfectly.