Championship Saturn II Billiards Cloth Pool Table Felt

i paid full price for the Felt, so my review is unbiased and based solely on the merits of the company and product.This is the 3rd pool table I have renewed, back to playable.The company sells this felt at a price point below any other supplier I have found.Quality is excellent, there have been no defects detected in the material.Piling is a sign of poor quality felt, the fibers are well bound, and overall no Piling during rub tests which would indicate poor manufacturing.The Piling test passed with flying colors.Color Fast test, passed with flying marks.Color Fast is very important as failure in any part of the cloth can be a disaster leaving any wet spot especially with Burgundy will fade and then you have light and dark spots also a danger if you happen to have a wet sleeve and rub against the felt it could damage the shirt you are wearing as well.Strength test passed as well with flying colors.Lastly quantity, do you get enough material to allow for error, YES YES YES.The Company not only cut the felt with room to spare allowing for less experienced individual to GET ER DONE.Rail felt was not only Cited it was precut with room to spare, very generous cuts.Shipping, very fast and well packaged.Lastly, did I get everything the company claims with the order,,, YES.I received everything they claimed, the two pieces of matching chalk was in the box as was the Spots.Lastly I have in the past paid a little over 300 at a local supplier in the city for felt, the felt was cut so close any error on my part would have been a disaster. Also the expensive felt was no better. The Rails were not Cited and were not pre-cut.The company should be commended for quality, and most important I ordered for an 8 foot table, I had enough to cover a 9 easily with just a bit extra stretching.

I bought a used pool table and can’t afford to have it prof move and install. So I decided to DIY! Installed new bunper and refelt. There are plenty videos on YouTube explaining how to install, leveling, test and replace bumper cushion and refelt. I watched a bunch over and over again to get it down pack. Some video are good other are bad. But The concept is pretty much the same.If you decided to glue your felt. I recommend to do it slow. Take your time. Don’t spray the whole table. Only spray and glue down 1 side at a time. Start with the long side first. Get long wood bar the length of your table to clamp down after glue each side to help support you when stretching the felt/glue on the opposite side.The felt color as expected. Felt feel strong, nice and thick.Test of time will tell if it hold up. If it does, I will surely buy it again for next refelt.

The Championship cloth may not play as fast as Simonis or other speed cloth, but it installs much easier on the rails (stretches easier without wrinkling). Also, I personally like it better because it allows me more cue ball control after contact, since the ball decelerates at a predictable rate, vs. ultra high end cloths which to me, seem like playing on glass. My table had an old green cloth and now it looks absolutely beautiful in burgundy which matches the room. Also, the cost is so low that I'm not at all concerned about any potential future damage. One thing to note is that the cloth has an up and a down side, which look (to me) identical. There are little stickers on each of the pieces indicating which side is up. Make sure you don't remove them when ironing out the wrinkles from packaging.

The felt is nice and I like the color...would have given 5 stars but the darn then wasn’t wide enough to easily cover the center pockets!!! The felt was long enough but not wide enough so now my side pockets look funky and just barely enough felt to staple the sides. So I’m just a little disappointed. The bumpers came cut separate so that was nice and those fit well.

I like the feel and look of it before and after picture looks like a different table took eleven hours to get it done but would buy it again DIY project for me was enjoyable to complete

I found that this material is great and easy to work with. It definitely is durable. The only reason that I gave it 4 stars is that when I ordered Amazon promised next day delivery. When I received my order confirmation, it was changed to 3 days. Not happy, since I had to drive 180 miles twice to finish setting up this pool table. It was already loaded on my truck and I was not going to remove the 300 lb. slate pieces. I am not sure how this happens, but has happened many times before with my promised delivery dates.

So far so good. Only complaint so far is that it didn't come with any directions (minus one star) and I would've preferred a few inches longer and wider to make stretching a bit easier. Each rail took me about 30 minutes and the bed took about 90 but I really went slow. It's probably best if you get some help stretching the bed. I'll update this if I run into any issues.

Just finished installing this burgundy cloth and it looks and feels fantastic. Enough extra for pocket liners. Easy to work with. Looks and plays beautiful. I hope it lasts. If it doesn't I'll update the review. The matching chalk is a nice addition.See Entire Table Rebuild Here:http://s469.photobucket.com/user/wood-n-java/library/Pool%20Table%20Refurbish

Firstly, the red colour is awesome. Couple of issues with the cloth though. The crease marks from being folded for shipment have been hard to remove and my cloth is stretched really tight. Biggest issue for me was fact that there is barely 2” of cloth hanging down the sides of the slate and this was not enough for me to stretch under the slate to reach the wood for stapling. The wood on my table is about 2 inches shorter than the slate. That said, I was able to make some modifications to the wood on my table and make it work. Cloth is 19oz weight.

OK for the price but it is definitely more fuzzy and slower than the speed cloth that I replaced. Also, I bought for an 8 foot table and there was almost insufficient width. In fact I had to put some staples in horizontally inside the side pockets, with slate and particle board underlay showing. I covered them up by making strips from fabric eft over from the length trimming and used spray adhesive. Leaving the staples exposed results in scratches and chips in the balls when they are hit hard into the pocket and rebound against the inside face of the pocket, hitting the staples. The fabric liners were double thick (folded over) and prevent this. Apparently some installers do this on all pockets as a matter of course.

All pieces were plenty big with lots to spare and color is nice and vibrant. My friend said it’s slower than his simonis cloth but we are quite happy with it.

i dont believe that this carpet could handle commercial use i have played arround 50 games on it and have done some jump shots and cue has touched carpet lightly a few times did leave spots on carpet where the material is now missing also you can see where the balls mark where the triange is placed and did have some small holes on it when new but only noticed after instalation didn't bother returning did not want to redo the job i do not think it is 21 oz more like 19 oz it is not the quality/thickness of the carpet that was on the table before it (8 years)will not last as long!! this is my opinion otherwise from that it plays nice fairly fast and descent spin control over all good for light use i have owned for 2 months i will leave another in a few monthes to inform how it holds up

ordered a red and a burgandy color . one for me and my sons pool table . .. received them one at a time . ...same address . ??? two days apart . same color . ???? really . they just changed the color on the label . lol. so much for quality control and customer satisfaction . .