Park Tool SW-7.2

Fits in the palm of your hand. Made of a durable alloy, is a solid 3-way spoke wrench. Spoke sizes 0, 1, 2. Fits onto the spoke on three sides and the wrench is easy to use. Good value for the money.

Made if a heavy metal, doesnt feel cheap

The spokes on my bike were very loose and the wheel was way out of alignment. I have never re-aligned a bicycle wheel before. But the bike repair shop near me didn't even bother answering their phone, so I was frustrated and ordered this spoke wrench so I could do the job myself. I read some internet articles and watched some videos on how to do spoke alignment. The first time I spent about 1/2 hour and got the wheel reasonably straight. It didn't wobble from side to side. I tried out the bike and it was fine for about 2 days. Then the wheel started wobbling once again because some spokes had come loose. So I did it again and the same thing happened after a couple of days. Then I found out what I was doing wrong -- I was not getting the spokes tight enough! Not even close. So finally I got them all really tight. Months later the wheel is still fine. My advice if you have never done this wheel alignment before is to check a known good wheel and get a feel for how tight the spokes need to be. Otherwise they could come loose just by riding your bike.

Tool feels very high quality but I had to file the largest slot a hair to work on my e-bike spokes. Otherwise it works well, was easy to use, and seems like a good tool for the price

3 sizes in one. Perfect for my needs. Easy to throw in the tool bag to have handy at the park.

Works great. No stripping. It goes where the bike goes.

I was hesitant to mess with my spokes so I approached the task very gingerly. I watched a YouTube video. The takeaways were 1) It's NOT righty-tighty, it's lefty-tighty, and 2) Loosen first (the ones that need loosening), then tighten (likewise), and 3) go easy, like 30 degree increments. The tool itself had a slight burr running along the outside edge of the slots, so I sanded them smooth. But it's a great tool. My bike with steel wheels didn't need much adjusting, but my 2 bikes with aluminum wheels benefited a lot.

They fit on the spokes correctly and do what they are supposed to do.

Park Tools are high quality tools and this spoke spanner continues the theme. It was purchased as insurance for a long bike ride where our party will be away from support. I am hoping that we will not have to use it but should one of the party break a spoke or two, we have the right tool for the job. The spanner is well made with no sharp corners to cut you or damage the bag you put it in. Check that this tool will fit the spoke nipples on your bike - this tool covers sizes 0 to 2 inclusive. There is no hole for a safety cord but space to drill one if you think you might loose it or you want to trim off some of the 62g this tool weighs. I used the 18mm flat area as a suitable place to engrave some identification since this tool is more likely to be “borrowed” because of its looks and simple desirability. A beautifully made tool that, for all the right reasons, I am hoping not to use in anger.

Does the job and decent quality, clearly a budget version of a better tool

Funciona muy bien para el ajuste del centrado de ruedas en los radios

Top Qualität. Durch die langen Vertiefungen werden die Speichennippel schonend und sicher gegriffen, so können auch Alunippeln ohne zu verrunden nachgezogen werden. Genügend klein, um das Tool auch auf Touren dabei zu haben.

Fits perfectly on the spokes - the real thing - tried one from Canadian tire - absolute garbage - is either too big too small. This one is like a glove on the spoke. Yes it more expensive but is well worth the money.