SPACECARE Workbench Casters kit 600Lbs Quick Release 2 Mounting Options 4P

Works great. Put this on my portable legs. Now I can move her around in the garage when I need more room when not in use.

These casters were exactly what I needed. My workbench is built from square tubing with adjustable feet, and installation was straightforward—I welded the back plates to the legs, painted them to match, then slid the casters in and secured them with the pins. The whole process was quick and hassle-free. This upgrade has made a big difference in my small shop. Being able to move the workbench easily has made rearranging and optimizing my workspace much more convenient. Highly recommend.

Just a little difficult to install. Works great.

The quick release plate fits beautifully on my 4080 profile based sim rig (Sim Lab GT1 Evo). Already this sets it apart from a lot of other casters I tried for this purpose that wouldn't fit into the profile slots as well as this one. The rig gets moved occasionally for cleaning and etc and being able to detach these casters afterwards is amazing to be able to use them elsewhere or just to not stub my toe on them. The wheels do retract up to near level with the bottom of the mount plate but perhaps not quite; you might want to make sure your rig has a bit of elevation from rubber feet underneath it or something for ease of sliding it in and out of the quick detach mount if using this for simracing or some other aluminum profile based application. Manually lifting a side up to put the retractable caster on is an option too. EDIT: I should note I'm using the 600 lb variant with a 4080 profile rig. It would appear the 900 lb variant has a different sized mounting plate. Also I wish the quick release plates were sold separately.

These casters have been a great addition to my workbench. The quality is excellent, and everything feels solid and well built right out of the box. Installation was straightforward, and once mounted, they worked exactly as expected. The quick-release mechanism is reliable, making it easy to move the bench when needed and set it back down securely for work. The casters roll very smoothly, even with a loaded workbench, and they inspire confidence when moving heavy equipment around the shop. They’ve been dependable from day one and have held up well with regular use. If you’re looking for a quality workbench caster kit that’s easy to install, rolls smoothly, and performs reliably, I would definitely recommend these.

UPDATE: so when I pick up one side to move my desk through the sliding glass door, the wheels just fall under the feet of the desk. My plan is to fabricate 4 pieces of metal to bolt through the same holes as the bolt that holds everything together. The goal is to create a stop so that the wheel does not fall under the foot of my desk. I will update with a photo when I complete this part of the project. (My goal with all of this is to give the manufacturer ideas on product improvement, because I genuinely like the idea, I just want something better. While these were reasonably priced, Installation is not always easy. I bought angle steel at the local home depot, and some 1/4" bolts and nuts. I put 3 bolts in all but the one in the front of this shot (oversight to be corrected) Everything has a drop of red Loctite on it so I don't have to revisit any of this. If not screwing these into wood, use the machine screws that come with that have the counter sink head on them. 2 of these hold the bracket with the pin that makes for easy removal. The 1/4" bolts with the countersunk screw head stuck out too far and made it impossible to slide the wheels in. while this might not be a terrible solution for some, I DO want to take them off at some point. Regarding the wheels themselves. Everything kind of flops around, and while a better design would involve some type of spring system where the wheels don't flop under everything when picking up the desk and putting it down, that will require a design upgrade.. Positives. The angle steel I bought is really heavy. I don't believe it is going anywhere. The bottom counter sunk screw for the bracket is bolted onto the leg, the second on the angle. everything is really tight, and I am excited to use the new wheels, roll the desk out onto my deck, and work OUTSIDE when I work from home! I shared a picture (before I cut off the long screw and paint the angle semi-matte black) so you can sort of see what I did. One screw that is not visible went into the bottom part of the leg. The bracket hangs below that leg but not quite touching the floor when the wheels are up or off.

Quality product, well built, $ fair price. The directions were brief, written in English with customary inch measurements, but in decimals instead of fractions. I used the brackets so that I can remove them to keep them out of the way. I’d highly recommend them for at least 600 lbs.

The product itself is pretty good, but the installation instructions are all but useless. I ended up mounting the caster on a 2 x 4 then clamping that to the bench leg. Then I played around with it till I found the optimal height for the mounting plate to make the caster lock in the down position at the point where the bench leg would be 3/4" off the floor, then attached the quick plates to all 4 legs at that height. The legs on my bench are 3" thick - none of the included bolts were long enough. I didn't have bolts on hand for this so I mounted the plates with 3" deck screws. If this proves unsuitable over time, I will get the appropriate bolts. I highly recommend using mounting option 2 where you can remove the caster assemblies when not needed. I don't need those levers sticking out like they do, just waiting to take a chunk out of my ankle.

Delivery early well packaged top items

Roues super faciles à installer et très pratique car en les enlevant on ne se prend pas les pieds dedans,

estaba en perfecto estado

Good product. Just need to place centre of holes at 50mm. Works fine

Las ruedas están bien, pero llego incompleto el paquete como se ve en la foto, faltaba una placa de fijación Devolví el producto pero................... los precios se triplicaron al querer volverlo a comprar Paso de 790 pesos a 2,100 pesos Al parecer es un gancho para llevar primero a la compra para después vender más caro el producto