Nuvo Lighting SF77/194 Transitional Six Light Vanity in Chrome finish

Looks great ,,, works great Easy install

I can not tell you how much I am in love with these lights. Most Vanity Mirror with Lights cost well over $200-$300 and I did not want to pay that much. I researched a few DIY Vanity Mirror with Lights and thanks to YouTuber, 4theloveofkelz, I was able to make my own DIY Vanity Mirror with Lights for under $100. You can check out my blog post on how I made my DIY Vanity Mirror with Lights [...]**Diary of a Makeup Addict** There are many ways this light strip can be used. It is important to note that this light does not come with a power cord or on/off switch, you have to buy one separately to hook this item up. Check out the "customers who bought this item also bought" list and suggestions should be offered. I also listed links to all the items I used on my blog post. Check out the deets [...]. It was very easy to hook it up. These lights are very sturdy and provide a great light source. Although I do not have mine mounted, I imagine they are easy to mount, as they come with holes for easy mounting. I am very impressed with this vanity light strip and would recommend it to others!

Two important tips to help you install this six light fixture. First, to separate the wall plate from the decorative face plate simply remove the six cylindrical socket covers by pulling them straight up and away. This will allow the back cover to fall from the decorative plate. Second, for the six light fixture, there are two sets of wires inside the wall plate that must be connected to the house current wires. If you don’t do this, only three lights will light up, and you’ll have to take the fixture apart to connect the other set (which I hade to do). These two things are not mentioned in the instructions. Other than the poorly written instructions, this is a nice fixture for the price.

Bought used, and saved a few dollars. Replaced a very ugly fixture with this more modern fixture. It was very easy to install with minor electrical knowledge (basic install, match the black wires to the black wires and white wires to the white wires. Came with mounting screws and wire caps. Some notable things about this fixture: - This fixture has two sets of wires that get connected to your lead wire. Easy enough to do, but make sure you find both sets inside the fixture otherwise only half of the lights will work. - Cheaply made and when it arrived had a small bend in one corner and some broken porcelain on the inside of light bulb sockets. Bent it back in and damage was minor to the sockets so no need to worry.. - The fixture comes apart by removing the 6 pieces on front around the light sockets. They pull right off. Don't try to remove the clips on back, they are the light bulb sockets. - Shows fingerprints! Wear gloves or be ready to wipe it down. - Did not include anchors for the mounting screws. I'd recommending getting some if installing on dry wall.

Very nice, well packaged

I havent installed on wall yet, but i put it all together and works perfect. I did not install it into a wall fixture, rather a Craft Light Plug with a switch for easy on/off, also purchased on amazon (amazon recommended it as a frequently bought together item); it has 2 exposed wires on one end. Full instructions that i wish would come with the light: To remove backplate from front plate, grip chrome bulb covers that would sit at bulb base and slightly twist or just pull; the covers will slide off exposing just the bare ceramic; once all 4 are removed, youll be able to remove front plate. For the plug, the plug wont match the instructions; the plug will have two white wires and the light has a white & black. If you look closely at the two white wires one is grooved and the other is smooth. The smooth one is your black wire, the grooved is white. Very important; your light wont work if you get it backwards. Pinch your two wires closely together and insert into orange wire crimper thingy; once your wires are fully inserted, firmly pinch your two wires at topto keep in place and keep twisty orange piece over and over until it stops or wires want to bend with it. Repeat for other set of wires. To test pull on wires to make sure they dont come out and are very firm and tight into crimper. Seperate your black wires from your white wires into seperate sides of box; you want to do this because if any copper wire inside your crimper is exposed and touches exposed wire from the opposite colored set, it could potentially start a fire, so just seperate them for 100% safety. Run your plug wire along the edge and have it coming out side of light. Take the green screw and screw it half way into spot marked ground wire. Take your ground wire thats attached to front plate and make a small hook on end of it. Hook the ground wire around the ground wire screw on light back plate, and screw in the screw the rest of way to tighten the wire firmly behind the screw. At this point, it is fully operational and you can test it by screwing in a bulb and making sure it works. Once verified, remove bulb, put the front plate into place the same way you removed it, remove the blue protective film on the chrome, and put light base pieces back in place. Once you remove film, be mindful of fingerprints. It will look identical to when you first opened box, just with a wire coming out the side and no longer has the blue film on it.. Take the small silver screw and put into small screw hole on side of unit; this will help keep it secure so the front/back plate cant come apart unless you remove screw. Screw in your 4 bulbs; some of mine were a lil cock eyed so i unscrewed the bulb and adjusted the ceramic base a tad to align it correctly then put the bulb back in. Hang up, and enjoy! Another note; i plugged a remote sensor box in and plugged this light into it, then put velco on back of remote and attached it to front of vanity so i didnt have to reach go turn off/on, just a nice simple click of a button. The remote sensor plugs into a single outlet and has 2 plugs on it. This leaves one outlet with 2 plugs for the remote, and one normal outlet open for non remote functions. I got a surge protector and plugged my curling iron, hot iron etc into it and then used this for the other port on the remote sensor; so when i use the remote off button for my light, my curling iron etc all turn off and i eliminate fire danger that beauty causes lol

This has got to be the worst design of any product I have bought to date (and I buy a lot). When unpacked the product looks quite sturdy and has protective film over the metal body. There are some screw mount holes on the back and a hole through which the electrical wires can pass. All seems well. But the manufacturer forgot that people actually need to connect the wires... The wires with the connector are tucked safely inside, with no way to access them or extract unless you disassemble the back of the unit. Unfortunately, the only way to open the back is to pry open 6 pairs of metal clamps that not only hold the back to the front, but at the same time hold the 6 lamp fittings to the front. Once the back is removed it is impossible to re-attach it with both sides of each pair of clamps in their original spot. They are either tight enough to hold the fittings, but impossible to line up with their holes, or they can be lined up with the holes (very cumbersome and tricky) but then miss any tension to hold the fittings. As a result the fittings are wobbling in their spots. I kept this only because it was cheap and it is tucked away out of sight behind a ledge inside a closet with sliding doors. But if you intend to mount this in any place where you will see it or where it may be prone to vibration (e.g. a closing door nearby) causing the fittings to dangle out of the base, I would strongly urge to find a better product.

Hello everyone! First, do not remove the protective film until the very last moment. Second, read the instructions carefully. Carefully remove the decorative caps from the electrical sockets, they are also the clamps for attaching the decorative front panel. Decide on the cable. Make all connections inside. Do not try to pull the wires out. Do not remove the electrical sockets from their positions in the base. The fasteners are very fragile and break, then it will be difficult to fix them. I personally made additional corners from a plastic board and a slot and secured them with GORILLA glue to the base of the medical cabinet, if you go this way, wait a day for the glue to dry. Glued tightly and there is no need to drill holes in the wall and spoil the tiles. I aligned the front panel flush with the surface of the mirrors. LED lamps 1680 lumens, which corresponds to 100 W of ordinary lamps. But in reality it consumes no more than 20 W. That for all five lamps approximately real electricity consumption of only 100 W. The thing is delicate, be careful with it, do not leave dents, once again do not remove the protective film until the very moment you screw in the lamps. If you do everything correctly, you will get a sea of ​​​​beauty and light. I mistakenly first bought a smaller size with 4 lamps, but the company returned my money minus the cost of sending it back. But that was my mistake. I bought a second time but already the right size 30 inches. And this time everything fit just perfectly. I think you will see everything you need in the photo. The only thing I can add is that my outlet has a switch on the wall. When I did the renovation in the bathroom, I foresaw this in advance, making an outlet that can be turned on and off as you usually turn the light on and off with a switch on the wall. The only thing is that I placed the outlet a little high. And everything is fine there.

Justo lo que esperaba de este producto, fácil de instalar, se ve bastante bien con las 6 luces encendidas, buena calidad de materiales, gran compra, recomendado 100%

I knew I wanted vanity lighting in the master bathroom. Everywhere I looked it was either way to expensive and way out of my budget, or within my budget but worked terrible and looked worse. Then I found this one and I am so happy with it. It was important to me that it was dimmable too. I like to take showers in low light to really set the I'm-in-relax-mode mood. It's a great light fixture!

Muy buena calidad del producto, cumplió mis expectativas. La entrega fue más pronto de lo esperado.

The construction is a little cheap, but once they're up you can't see any of the cheap bits. I bought two of these to frame a mirror, and ended up cutting small chunks out of the bottom to hook them up to extension cord adapters since I wasn't mounting them over lighting hookups. Worked perfectly. Look great. Used with Philips LED lights and girlfriend is very happy with the vanity setup.

Looks great. Easy install. Could be a bit more sturdy in my opinion.