Seville Classics UltraHD 72" W X 25" D Wood Top Height Adjustable Workbench 2000 Lb Capacity

I generally do not take my time to write reviews however this product definitely deserved one. It is so hard because there were a lot of good reviews but I also read some bad ones and that always makes you second guess things. This table is amazing. It is very well built and the top is like a tank. I am serious, the wood top weighs over 100lbs. The packaging was sturdy and they were smart, they faced the bottom of the table top out. There was a minor dent in the box but as I mentioned the bottom was facing out so it didn't make a difference. This thing is very sturdy. It is also pretty easy to put together, it took me around 30 minutes. I also like the screw in feet, it makes it easy to level and keeps it from rocking if the floor is slightly off. On top of all of that, it looks great. The paint is powder coated on and looks really nice. I cannot recommend this enough. It is an amazing bang for the buck

I was searching for an inexpensive and straightforward desk for our new house. I wanted something that was solid wood and not particle board. There are plenty of desks out there made of particle board that look nice but won't hold up over time, and most solid wood desks are just too expensive. I found the Seville Classics UltraHD on Amazon after multiple days of browsing on too many websites. I plan to use the workbench as a desk, and then when I have more money, I'll take it to the garage and use it for its intended purpose as a workbench. After the purchase, I received an email that the workbench/desk would arrive between 3/8-3/11. On 3/9, the FedEx van pulled up with three workbenches. I was shocked and a little scared I had made a mistake and ordered three workbenches instead of one. I reviewed the order and double-checked the credit card statement, ensuring I was not the one who made the error. With no errors on my end, I contacted the seller and told him about the problem. I did check FedEx and found out the price to ship them back to the seller or Sam's Club, and the amount of damage done to the boxes already would cost the seller more money than the desks are worth; however, he was nice enough to let me keep all three desks without any issues. The quality of the desks/workbenches is good, but there are a few gouges on the two that I have opened due to shipping. Each workbench weighs about 150 lbs, so expecting to get a perfect workbench is pretty unreasonable given how they're handled by the delivery service. However, given that we have three for the price of one, they're great! If the benches were being used as a proper workbench, then the gouges wouldn't be such a big deal, and I would use the flaws as a chance to practice my woodworking skills. Fortunately for us, the gouges are on parts of the desks that we seldom touch, and it's not visible unless you're looking for them. Here's how I am rating the workbench/desk. Customer Service: Five Stars Workbench: Four Stars Desk: Four Stars Shipping: Three Stars I'm giving this a Five Star review since this is a workbench and works great as a desk, customer service was excellent, and I received three for the price of one.

I picked this table up to support my Bambu X1C printer and Anycubic 5 Pro resin printer. It is a nice solid table for that task. Set up was pretty easy. The legs and support parts are pretty easy to move, but let me tell you, that table top in very heavy. No one was around the day that table arrived and I jack-assed that table top up a flight of stairs... I'm still not sure how I pulled that off. You are fore warned. If you're looking for a nice sturdy bench for working on or using as a printing platform, I very much recommend this table. If I had more room I'd get another... but have someone else carry it.

Like the table, like the sturdy and size however it came scratched. Which was probably shipping not the product so five stars for me

TL;DR: FAIRLY sturdy, great quality, looks VERY nice, a bit iffy to adjust the height, and I wish the top was of a bit more solid wood and for a bit more rigidity from the frame. The bench looks incredible. If you’re using this inside your house as a table or desk or something of the sort, this thing is perfect for that, minus the weight, so plan on leaving it where it’s at unless you have extra muscle to move it around. The top material is not quite butcher block grade. It’s thick and sturdy but it’s too soft and scratches easily—I gently placed a medium duty vise on the top, lifted it and it scratched easily without any dragging. Other reviewers have mentioned that it might be too nice for a shop or garage environment and I think that assessment is correct. Don’t get attached to the top of you’ll be working and placing heavy objects on it or place a mat or scrap wood on top of it. The frame isn’t as sturdy as it’s mass makes it seem to be. There’s definitely some twisting with a fair amount of torque applied to a corner. So if you’re planning on installing a vise like I did, plan on either adding a cross bracket or two to the frame, or if you’re not a welder or fabricator, simply secure it to a wall. That should fix the issue. It was easy to assemble, but unless you’re a large person that can awkwardly lift more than 100 lbs, you’ll need help to prop it on its legs and move it around. Installing casters will help greatly and the legs are made perfectly for a set of them, if you know what you’re doing. Overall, it’s a great bench/table that looks very nice and it’s of nice quality. However I don’t think it’s made for real heavy duty without showing wear very quickly on the top and twisting from the frame, although it’s mass and basic construction will provide plenty of space and strength to heft heavy loads. If you’re not going to use it in a serious mechanic shop or any kind of fabrication or construction, this is perfect. It’s perfect for the DIYer and ocasional heady stuff if you don’t mind scratches and dents. It’s too heavy for interior work unless you plan on keeping it in place without moving it often as this is a HEAVY bench. Otherwise it’s perfect for light and medium duty work and it does look great.

I have an odd shaped kitchen with no center island. I was looking for a heavy duty commercial workbench to serve as a counter high center island with stools. I shopped it hard for a year. This showed up on sale on Amazon for about 40% the cost of other benches. It arrived quickly and was so pretty! It looks like furniture (especially the butcher block top) and it has a cool industrial look. IT IS VERY HEAVY! As others have noted you can make it almost any height that suits you, but it does have to be turned over to adjust the height. It was very easy to assemble. My boyfriend and I put it together one evening in 30 minutes! If you have "center island envy" but your kitchen doesn't have one, consider this. It would also make a great desk for an office. This will go down as one of my best finds ever!

I took a chance on this and glad I did. Bravo to Seville for a well packaged table that arrived undamaged even though the delivery peeps may have handled it a bit less gentle than I. The design is fabulously simple and uncomplicated to assemble, has seemingly heavy duty quality components, and in the end you have a rock-steady surface with adjustability to complete your projects. Kudos to you, Seville!

Sturdy, durable, and spacious. So good at this price point. Only complaint is to adjust the height you have to either flip it back upside down or squat it from underneath with your back while someone else does the spinners.