Recover CC3H Rail Adapter Compatible with Full Size 1911 - Easy to Install Over 1911 Pistol

Review: (My weapon: Citadel Traditional Fullsize 1911-A1 9mm) Summary: Awesome product, looks and functions great, needs filing to fit properly, shipping was horrible. Fit: It "fit" the gun out of the box, however if I literally would have just taken it out of the box and left it as is the gun wouldn't of functioned. The slide rubbed it and the grip section was too thick to let the grips mate in the middle. The grips themselves are clearly made to be ground to fit per application there are "built up" areas of material around sections that can be easily filed for a custom fit. Bottom line is 45 minutes later and a pile of plastic these grips fit perfectly and look great. Function: The included hardware is functional and easy to install, the grips are not any wider than the set of hogue wrap around grips I took off to install them (they may feel "wider" to people who use panel grips as any wrap around grip does. I was going to stiple the grips when I got them but there is no need the raised grip texture is pretty effective. Feels good in the hand and the rail works perfectly. I have a laser/light combo on there fits perfect the gun does not feel significantly heavier than before even with the light/laser on it. These grips also surround the area where the slide release pin is and helps to keep you from scratching up the frame when you are taking it apart, added bonus. Aesthetics: Confirmed the factory picture does suck as I suspected and the grips are a much tougher looking dark OD green like they should be not the light olive looking color in the photos. The gun looks mean I really like the looks of these grips. Note: Let me say while the item is awesome shipping speed was horrendous it took it like 10 days to drive from LA to PDX which is literally as simple as saying leave LA get on the I5 and stop when you get to Portland 8 hours later... Its not like it came from Hong Kong, from which I have received products faster than I got this. Ill try to add a picture to the customer images.

Perfect fitment on Ruger SR1911(full size). Good feel, looks good, I would recommend it.

I have a Rock Island/Armscor 1911 A1-FS GI Series. I wanted to replace the wooden grips that the model came with, and selected these grips, because they provide a Picatinny Rail System, that the other grip systems do not. Before I go any further, I will say that these grips are an excellent choice for replacements. But I had to do some custom fitting. Read on. First, the top edge of the left-side grip interfered with the slide release/safety detent spring tube. Sanding that down allowed the left grip to snap into place easier. Second, on both grip halves, around the inside edge of the trigger guard, there is a raised ridge. Apparently, the gun's trigger guard is supposed to be slightly larger in order for it to fit properly around that ridge. Not so the Rock Island. The trigger guard and the ridge are the same size, interfered with each other, and prevented the two grip halves coming together. Again, sanding both ridges flat allowed both grip halves to come together properly. Last, on both grip halves, the top edges were tightly binding on the bottom edge of the slide. They were so tight that the slide would not move. Again, sanding these edges provided a clearance between the top edge of the grip halves, and the bottom edge of the gun's slide. In all, the work took about 30 minutes. And I'm completely pleased with the results. Your results may vary, and in fact, you may not need to do any of these modifications depending on the model 1911 you purchase. I would have given the system five stars if they had gone together without me having to work on them at all.

Excellent grip/rail for laser/light. Fits my rugar sr1911 no flaws! The value is wonderful! I was expecting problems that other people were talking about but had it on in less than 5 minutes! Should last a lifetime!

This turned an entry level pew into a totally different pew. Made my budget RIA look like a worthy competitor. It’s very light. Super easy install. Had to file the top just a hair, slide was rubbing. No biggie. Took 5 minutes to shave it down. The grip feels good. For the price, you can’t go wrong. Threw a light on and am super satisfied. Easy way to change the attitude of a pew. Having a light is invaluable as far as keeping the fam protected, kind of a must. Be safe everyone.

I bought this for my American Tactical M1911, so I could mount a laser sight to the pistol. Unfortunately, there are only three rail spots and they're all too far back to allow me to use the Ade Advanced Optics green laser sight that I purchased the grips for. With the laser mounted as far forward as possible on the rail, there isn't enough clearance between the trigger guard and the back of the laser, to plug in the charging cable for the laser. It lacks about 4 mm of clearance, even with a 90 degree micro B cable. There's enough room on a 1911 for it, I wish they would extend the rail enough to add another slot. I could probably hack the cable and/or the grips to make it work, but I'll probably just switch the smaller red laser from my Glock to this one. The green Ade laser works fine on my Glock 19. The fitment isn't too bad, but there's a noticeable gap left between the grip halves under the trigger guard after it's installed. From the picture you can tell the color is just a little bit more of a purple hue than in the ad, but that was a good thing in my book. https://www.amazon.com/Ade-Advanced-Optics-Rechargeable-Sub-Compact/dp/B0764QGBYC/ref=cm_cr_srp_d_product_top?ie=UTF8

Love these grips. I got a Kimber 1911, and it was missing that tactical look I was looking for it. Recover Tactical created the perfect look, color and comfort I was looking for. It feels nice and durable while still keeping me and other at the range safe.

Poor service and quality of the product

Q&Aの欄にも既に書き込みがありますが、マルイMEUピストルは同社M1911A1とはダストカバー周辺の形状が異なっているため、そのまま装着するとダストカバー周辺が反り返り不恰好になります(作動自体はできなくもないです)。 M1911A1には無加工装着が可能です。 ウォーリア･シリーズは後付けアンダーレイルを装着していますが、これはビス2本とフレームの穴でかみ合わせて固定されているだけなので、ビスを抜いてレイルを取り外せば装着可能です。 が、ウォーリア･シリーズは基本的にMEUのフレームにレイル用の穴を開けたものをベースにしていますので、無加工だとMEUと同様の症状が起きます。 これを回避するためにはダストカバー周辺をM1911A1と同等まで削り込むか(結構削る羽目になります)、M1911A1のフレームを入手してビーバーテール対応に加工するかのどちらかになります(ポリマー製のグリップを加工するのは大変なので除外しておきます)。 このグリップを装着することでダストカバー下部に20mmアンダーレイルが追加されますが、しかし基本的にこのグリップは専用ホルスター(Recover Tactical HC11)とのセット運用を想定して設計されていますので、ホルスターと併用をしないのであれば、実用上ではレイルの無いMEUはともかくウォーリア・シリーズに無理をして装着する利点はあまり無いと思って良いと思います(レイルがあるフルサイズが欲しいならナイトウォーリアでいいという話もありますし)。 とはいえ、仮にウォーリア・シリーズに装着する場合は加工部は外付けレイルの下に隠れる位置なので割とラフに削ってもレイルを付け直せば隠せます。 念のためレイルパーツの外淵部分をシャープペンシル等でなぞりガイド線を引いておくと良いでしょう。 なお、マルイ純正のグリップウェイトは当然ながら使えなくなりますので「オモチャか！？」と思うほど軽くなります(オモチャですけど)。 さておき。 まずこのグリップは装着するとグリップフレーム前部を覆うタイプなので若干前後に太くなります(1～2mm程度ですが)。 しかしトリガーにかかる人差し指や親指が当たる位置は薄く作られており、しっかりと握りこむことが出来ます。 また、右側パネル裏はアンビタイプのセフティにも対応するスリットが設けられています。 手にしっかりとフィットするグリップ感もなかなかですが、しかしやはり真価を発揮するのはホルスターHC11との併用でしょう。 お互いをセットで運用する前提で設計されていますので、ガッチリとした固定と素早いドロー、そしてアンダーレイル用アクセサリの装着を全て同時に実現できます。 私はナイトウォーリアへ装着しましたが、純正パネルのダブルスタック並みに横に厚いグリップよりこちらのほうが好みです。 難点を挙げるなら、トリガーガード～グリップ前面を丸ごと覆い隠すためハイグリップには向かない印象があるところでしょうか。マガジンキャッチ付近が3mmほど厚くなります。 余談ですがメーカーのWebサイトを見るに、このCC3Hのほか、CC3Pというグリップフレーム前部を覆わないタイプやスライダー交換式グリップパネル、可変ベルトクリップ搭載型パネル等面白いコンセプトのグリップが多数存在しているようです。 こちらもいずれ国内で入手できるようになると幅が広がって良いなぁ、と思うんですが、いかがでしょう？

Great product looks great Thank you.

I received the product missing a screw but after a couple days of communication with the seller this was resolved. They were very reasonable to deal with so I'm keeping at 5 stars. Any concerns with how cheap or flimsy it looks were immediately gone when opening them package and I was even more impressed with how it felt in the hand upon installation. Give it a shot! Not many options in aware of like this for the 1911's.

I kept this unopened since while. Finally me décides in opening. Me Michel J MaiLLET should have opened the box sooner. Upon reading the package … me Michel J MaiLLET discovered certain elements within me person ~ Michel J Maillet

装着してもあまり太くならず手頃な握りやすさでグリップ性が良くなった感じです また取り付けるとガラッと印象があり変わります 当方マルイ70sに取り付けましたが加工等一切なくポン付け出来仕上がりもがたつき等無くかっちり決まるのでレーザーサイト等を取り付けてもなんら問題は無く使えます