YESWELDER CUT-55DS Plasma Cutter, 55Amp Non-Touch Pilot Arc Air Power, Large Digital Display 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved

Background: I am a GC Superintendent for medium to large scale commercial construction projects so all the welding crews we contract bring the big boy equipment. They dont always have time to do mockups or small stuff we need done for owners and architects so I picked up the Plasma DS-55 and the yeswelder MIg 250 pro to keep in my trailer to do odd and ends as needed in a pinch. I’m super hands on and came up in the trades, so using tools isn’t foreign to me. Its not exactly my first time trying this type stuff but by no means can I call myself a welder or metal fabricator. I’ve been lucky enough to have learned basics on the Millers by some really talented welders and fabricators. Busting these tools out on the project I knew I was gonna get some side eyes hurled my way, but it’s all good, I don’t plan to quit my day job. The DS-55 set up (and 1 minor issue): Wanted to do it on my own see how easy it was for an average person, Set up is easy for the most part. I’m Using it in the field on a commercial jobsite ran off a temp power spider box, so I can use either voltage. Compressor is my typical 5.2 gallon Makita Big Bor used for framing, tank keeps up with no issues. The fitting installed on the air intake filter is a push connection with a cheap tubing, but it comes with a 1/4”male quick connect (I think type M) which I couldn’t use because we use larger hose fittings similar to automotive, not sure why but that’s what our tool yard insists on putting on. I Ran to the depot and swapped the hose and compressor fittings to match the ones sent. With all the parts put on my hose and compressor, that’s when I realized, they used like a silicone or glue or around the outside of the push fitting into the air filter. I could feel some clear thick substance and the fitting was not easy to unscrew. I don’t know if this was an accident or returned part but in the Amazon add video you see them remove it and swap it out very easy, I had cut the thin layer of whatever off, back the plastic filter with a pipe wrench, use a decent size crescent and slowly break the fitting free. I was already looking up replacement filter because I thought it would snap. I did get it broke free and we were ready to roll. We run commercial electrical OSHA Twist lock plugs so this being a residential style plug I had to grab one of the adaptors I keep around, make sure you know your plug type and the plug type on the machine, or plan to cut the chord and put a new end on which I will be doing next week so I don’t need the adaptor any more. Plugged it In, fired it up, and started cutting everything that was or wasn’t tied down. Worked nicely and cut clean, especially for not knowing the settings very well. I got some extra consumables because not knowing what I’m doing I’m assured to burn some up. They send two of the .8 mm and one 1.2mm which will go quick. The yeswelder consumables you order separately are actually measured in inches so the .8mm is the .03” and the 1.2mm is the .045”. Make sure to get the ones for the correct torch. Honestly it’s a great machine and even my welders came over and started playing with it and all were super impressed for how small and great it worked. Unless you plan to get a Miller or other high end set up, get this one and you won’t be disappointed. Worth its weight 10x over and assuming we take care of it properly I see this being around for a while. If your on the fence just get it and you won’t be disappointed. If something changes I will update the post. You tube: when you search videos they have the old blue DS-55 or the DS-55pro. For the life of me I couldn’t find the standard DS-55 takes the new black and red configuration. The blue set up and filter style is not the same as the new black and red. After watching the DS-55 pro videos I found, it seems this machine is the DS-55 pro it’s just Yeswelder dropped the “PRO”… not sure if there’s any spec or technical differences but if your looking for you tube assist, just watch the 55 Pro, it seems to be the same. Cut through: 1/8” mild steel 16 gauge cold rolled 1/4” hot rolled 1/2” mild steel 1/8” aluminum 1/4” stainless Leg to Trailer railing

I bought this to try instead of buying a new hand torch for my hypertherm. I'm very happy I did because this plasma cutter kicks but. Goes through 1/2 with no issues. Easy to setup and easy to use. Comes with plugs. Small frame. Takes up no space. Works fast.

Great little machine. Have had it about 6 months and not one issue. Have made hundreds of inches of cuts with it. For smaller work, it cuts better and is just more convenient to use than my old H-therm 45 ever was.

I was skeptical at first to be honest, but man am i glad i got this. It is the new red and black CUT-55DS. Where to start, i cut 1/2 in aluminum with ease. you have to cut slower with aluminum is all. i cut 1/2 steel with ease. anything thinner than that it will just slice through like butter at a very fast speed. last year i built a side by side buggy out of a electric golf cart, i spent like 500 dollars in total on cutting wheels and blades and grinding wheels and gas for the torch. if i had only had this at the time it would have made the job so much easier and faster and cleaner. there's not much to clean up with a grinder after these clean plasma cuts. Anyone on the fence thinking this will not do the job should put their mind at ease and just try it. you will be as amazed as me and wish you had gotten it sooner.

Like most of you, I was compelled to buy this machine after seeing so many reviews on YouTube stating that it was a great budget machine to start plasma cutting with. The CUT-55DS was well packaged and the accessories seem of decent quality. Upon firing it up for the first time, it merely hisses air. Also, there is a significant air leak inside the unit itself. No arc happens, no sparks. It is merely an expensive air nozzle at this point. I have gone through troubleshooting steps quite thoroughly to no avail. Multiple outlets have been tried, as well as my 220v outlet I use for my welder. It fires a pulse of air and that is it. It does not matter what current setting, pressure setting, or setting on the machine itself is set to, it refuses to arc. It is not a matter of grounding as the ground clamp is connected firmly. It should also be of note that the ground cable is made of copper clad aluminum, CCA, which is straight garbage. Not that it matters much because the 6-8 ga CCA cable is connected to what is at best a 10 awg connection inside the machine. Get a different machine.

Why did you pick this product vs others?: Used it a quite a number of times and it worked great!!! However the arc would become intermittent and then finally failed. After contacting yeswelder only by email, because no one would pick up the customer support line , you had to leave a voicemail (which no one returned). After about a week of waiting someone from yeswelder contacted me. I told him of the defect and sent pictures .He said he would send it to the appropriate department. I have sent various emails to yeswelder ona touch replacement. No one has yet to contact me. Its been quite some times since my first review. Yeswelder reached out and replaced my entire purchase.

I purchased this mostly to get some experience with plasma cutters. I did have one actual job - which was to cut off a huge number of concrete form ties. The form ties were 1/8" steel. I ran this on a 120V / 20A circuit at a setting of 30A, with air pressure set to 40 PSI. The ties were easily cut in 3-4 seconds. ( cleanup was easy with a little scraping and a wire brush ) I tripped the breaker a few times only when cutting some ties at the bottom of the concrete where the jet of metal could not be easily blown clear and I had the plasma running continuously for maybe 20-30 seconds. To get close enough I had to remove the wire guide/spacer. I also tried cutting some 3/16 steel bar, and some 20ga aluminum and 20ga steel. The thin steel cut very fast and clean. The aluminum was fast enough but not clean. Likely some adjustment of the settings and better technique would help. All in all, I should have purchased one of these long ago and can't believe the utility it provides for not very much money. I might note that I am lucky enough to have an air compressor with a dryer, so it provided very dry air that plasma cutters prefer. At the end of all this I could see some slight wear on the tip, but it was not enough to distort the fine focus of the plasma. Note that the specs say that the post-flow time is 20 seconds, which seems like a lot of air to waste. I didn't really notice that while working, and the 7.5 CFM compressor easily kept up with the demand.

Awesome little plasma cutter when hooked to 220v. The 110 option works but the cutting power is very limited, but when hooked to 220 there are zero issues. Cuts sch 80 carbon steel pipe like butter, Stainless steel plate no issues, very pleased with my purchase, easy to setup,easy to use, good value for your money. Perfect machine for my garage shop.

cumple lo prometido, buena relacion calidad precio

The manual is minimal, but the cutter works well used it on 240v and cut some1/4' and 3/8" steel Went well with 60lb air pressure for 3/8 First time using a plasma cutter, but have some torch experience.

Machine worked good at first. 10.6.23 Update: Machine will no longer arc. It will cut for about 3/4 of an inch and then quits arcing - Downgrading to 1 star because of this. 10.09.23 Update: Machine is working fine again. I am not 100% sure what the issue was but it may have been a humidity problem / my compressed air not getting dry enough.

I was totally taken a back by this unit; I normally shy away from off brands, I wanted something simple to cut and prep steel for projects and voila I'm here and there is the most cost effective plasma cutter you'll find... 5 stars

I used it many times already .I was waiting since they came to buy one.inam very happy when I use this tool because it's very officiant and quick to cut like right now.value for the dollars I paid.very good.thank you.looking at a Tig now that your company makes now