SHA CERLIN Heavy Duty Metal Bed Frame Queen Size, Platform Base with Wooden Headboard Footboard, 13 Strong Slats Support, No Box Spring Needed, Mattress Foundation, Easy Assembly

Quality great and setup was easy.

I was looking for really nice and really inexpensive bedframe for a spare bedroom and feel lucky I found this. The look is very easy to work with & neutral so it's very easy to design around. It's sturdy for the price and can handle up to a 14 inch mattress without taking up to much of the headboard. I have a 16 inch mattress on it, but it still looks OK. Would I rather have a 12 inch? Sure. It was easy to put together and didn't take very long. This would also be a great kids bedframe in a pinch. FYI you will always have better options on mattresses if you spring for the queen over the full, if you have the space. Oh and it was delivered much sooner than the timeframe they gave, I was shocked at how fast it came in. Great customer service. Honestly shocked at how well this worked, I'm super picky Also it's barely more than the cheapest metal only bedframe, so I'm wondering what some of these folks are expecting at this price???

Pros: Pretty bed Priced decently--cheaper is always better...well only if the quality is good LOL Not too difficult to assemble Cons: My headboard is dented on the right corner (didn't feel like taking a pic but I will if necessary--not asking for anything) and I know that this is due to shipping. It was packaged well but since it gets banged around, more cushion would be nice. Only reason I'm not returning is because I put it together LMAO Can make a squeaking sound here and there but I assume that's because it's against the wall. I'm used to a fabric headboard Putting the slats in was hell, DO NOT tighten the rails first (save yourself!!!) and the things that go on top of the slats are useless (to hold them in place). All in all, I like it so far!

it came early, package was in great shape, and everything i needed was in the box! Just a few things i would like to make certain that are explained. first, please read the directions, the first thing when putting anything together is to NOT tighten the screws all the way, until its completed. If you do you might have trouble getting the center slat rails to fit into their slots. Second, all the parts labeled, and are supposed to go where the directions say they go. Before i made this purchase i found a 1 star review with pictures written by Marlissa Butler, i read the review and made the purchase, crossing my fingers that i didnt get a defect in MY order! After building the bed i went back to her review, looked at the photos and noticed immediately that she didnt put the feet from the headboard on the correct sides. the screws pictured on the outside are actually supposed to be on the inside, and having them in the incorrect position would make all the cross bars not fit on the frame correctly. (it also would make the bed more narrow on one end then the other) Just make sure you go slow and put things where they are supposed to go. All of that being said, I love this bed. I personally havent slept on it as its for my 13 year old son and hes way over the age of sleeping with mom :) he is using his mattress from the old frame and he absolutely loves it. The colors in the "woodgrain" at the headboard and footboard they also have some texture n its really nice! The bed frame is supported by 9 "feet" (including the 4 you see on any normal bed frame). I really like this because im sure my son just throws himself on the bed like any other kid. There are like 2 inch rails on the sides that you screw in to make sure the mattress stays in place, i love that the company also gives you these lil rubber things that slide over the metal to keep your mattress (or you) from getting cut by them. We havent come into contact with them at all, but just incase, as a mom i appreciate the nice safety precaution! The center slats that support the mattress can jiggle a little bit and they make noise, the company did put something on the center long bar to help keep them from making noise. I squeezed a lil hot glue under each one to just stop them from making the metal jingle sound. If you have double sided tape that will work too. All in all i gave it 5 stars, i think its beautiful, only took me about 30 mins to build it alone, all of the parts are excellent quality, and the directions were really easy to understand. ill write back in a few weeks to leave an update as we have only had the frame for a few days now!

This bed frame is exactly what I wanted. It went together easily by myself, maybe an hour total. It is very sturdy & makes no noise whatsoever. My mattress doesn't move an inch either. The frame looks like the pictures & has a low profile, which makes the room feel bigger. The low profile doesn't make the bed awkward to use, though. Under bed storage is a little awkward due to foot placement, so even though there's technically more space under it than my old full-sized bed, I can only store 2 roller tubs under this as opposed to the 3 under my other bed. This is only a minor inconvenience. The bed LOOKS medium- to high-end despite the low price point. As soon as you touch the faux wood, it's clearly cheap, but that's irrelevant since it looks so nice. I'm very pleased with this purchase & glad I waited until the seller had it available again. Definitely recommend.

Grrat bed, easy to assemble, still using it, very nice end board graphics, nice color, easy to move around, comfortable,

This bed frame is well designed and well manufactured. The parts fit! Only one screw hole had a burr in it and I was able to carefully ream it out with a Phillips bit. The manual is well written ​​except for the last two steps. 1. Placement of cross members. ( Don’t worry about the little plastic pieces​, "buckles", until later. ) The ​first goal is to insert the cross members between the side rails.​ All of the cross members, "K", should be securely in place before proceeding to step 2. In order to do this, one side rail must be loose​ned in order to accommodate the length of cross members. In addition, cross members must be placed in order starting at the midpoint of the frame and working towards the head or foot of the bed, respectively. This allows for the necessary width between bed rails for sequential placement of the cross members. As each cross member is placed sequentially, the distance between left and right side rails gradually decreases until all the cross members for the top half or bottom half of the bed frame , respectively, are in their proper place. The trick is to keep each cross member in place while fitting the next one. When all the cross members are in, ​and side rails are again tightened, you are ready for the last step. 2. Inserting ​t​he buckles on each end of all cross members. The manual gives a brief instruction but the graphic and instructions need additional information. Notice the shape of the square holes in the side rails. They are square with a notch at the bottom. (p. 8, Fig. 1 & 2) Notice that when the cross member "K" is properly fitted, the bottom of "K" is flush with the bottom of the rail. It may be necessary to jiggle the cross member back and forth until it is properly seated. Take a good look at one of the little ​b​lack buckles. Notice the slot at the bottom.​ (p.3, Fig."L") This slot needs to straddle the top of the flat end of the cross member​, K. Also notice the ​top of the barbed flanges. This part needs to fit into the ​top of the square hole in the side rail. ​With the buckle positioned at a 45' angle, it must then be squeezed into the hole until the flanges are inside the hole and hooked inside the wall of the hole​. Pliers are helpful! Protect the outside of the rail from scratches. I tried to other add photos here but no go. See pages 3 and 8 of the manual. The bottom notch of the buckle must straddle the top of K while the top of the barbed flanges must be inserted into the top of the square hole. With K fully seated, place the plastic "buckle" atop K at a 45' angle, / , and with the top of the flanges entering the top of the square hole. With fingers or pliers press the buckle into the hole until the barbed flanges SNAP into place.

I purchased this frame in Queen to replace a crappy ~$125 frame I purchased a few years ago. This frame is twice the price but 10x the bedframe of the previous. I'm only a week in and will update review if anything drastically changes but I am extremely happy with this product. It is dead silent at night when shifting my hefty body around (I'm 6'2 280). Everything about it feels solid. No noticeable squeaks, groans, moans, or shakes. The rubber inserts are an interesting feature and I think add significantly to the quietness of the product. The product details indicate ~1/2 hr assembly time but I spent a little over 2 hours assembling. I am very methodical about this process, sorting pieces, measuring 4 or 5 times before applying screws, also took a few breaks. However, I imagine If you have help it should go significantly quicker. The instructions are pretty good, I've seen a few better and a lot that were much worse. Said instructions state to wait until the frame is put together before tightening and I took them very literally on this instruction. It seems to have paid off. After hand tightening I used a hex drill bit to give it a little extra at each screw.