Nano+Poly Penetrating Wood Sealer with Polyurethane - Premium Waterproof Sealant -1 Gallon & Bronze Cedar

Great stuff! Applied to our bare pine ranch table and benches. It goes a long way and the finish is nice, showing the wood grain and color, though slightly milky. You wouldn't know it if I didn't tell you. I light sanded the wood, vacuumed and wiped down with a wet tack cloth. The sealant goes on easily with a brush and a little goes a long way. Didn't use 1/2 gallon to cover a 120" x 40' table and two 108" x 16" benches, top, bottom and legs with two coats! It did require two people to get the second coat down (instructions said to apply second coat when first is damp), as in the Arizona heat, it was drying pretty fast. The ranch table is out on the covered patio and now I can wipe the dust off in minutes. I'm very please with this product.

Good product for the money and sealed my deck very well but after 1 year the high traffic areas wore down quickly. Color is darker than described

Bought the gray tint. Must have changed the lid as mine came with 4 metal clips holding the lid down. Pop off the clips and it opened like a regular can of paint. Shook it well & used a stir stick. I could feel a layer of … thickness on the bottom of the can, it was bumpy and if I pressed hard I could get a little of it up stuck to my stick. It would NOT stir in. I was concerned that the water seal ability would be impacted & tested it on a piece of wood. It does not seem to impact water proofing. Easy to apply. As others have stated, you MUST go back & put on the 2nd coat within about 20 minutes; if you don’t the 2nd coat just beads up & runs off. Had a couple places with knots in the wood & it took the color differently, lighter, so I went back after about 30 minutes to give it another coat (already had 2 coats on it) but it was too late, stain just beaded up & ran off. Consistency is like water, I was doing trim with some of it above my head - runs down your arm, drips on everything - just know this & be careful. I had two ladders set up, by the time I’d painted as far as I could reach on 2nd ladder (it goes on fast!) I would go back to the first & put on the 2nd coat. Easy clean-up. Took a star because of the sludge on the bottom, which I hope does not impact the longevity of the product.

This is the best deck stain and sealer I have ever used. It looks great (we used light brown tint on cedar) and has been durable through heat, rain, snow and ice. Caution must be used in the application to not apply in direct intense sunlight as it can cause variability in the color and appearance (this is noted in the directions)

1/2023 - Update I didn't remember to post in 2022, but I wanted to add a couple of pictures. I will say that am not sure if the product is going to hold up through six years (horizontal surfaces like the deck) as it's going on 3 years and I feel like I am seeing wearing I didn't expect. However, I am not a professional. I applied it with a brush and, perhaps, I didn't apply it as well as I should have. I am not comfortable blaming the product alone. Some sections seem to be holding up better than others. Currently, the furniture is covered up, but most of it seems to be holding up better than certain areas of the deck. It should be noted that most of the deck is probably close to 30 years old if not older. That may be a factor as well. 6/2021 - Update I originally posted last November after treating wooden deck furniture. This June, I treated the deck after having it power washed. Still thrilled with the product and the way it's working. I am adding 2 additional pictures. The first is after the deck was power washed and the second is after I treated/painted it with this product. You can even see beaded water on the deck 🙂 11/2020 I am posting a review of this product along with some pictures. I will plan on updating it each year as the product is said to last approximately 6 on horizontal surfaces and 10 years on vertical surfaces. First, let me say that I wasn't exactly sure what to expect. When the product arrived I found it to be somewhat thin. When I realized it was water based, it made more sense that it wasn't very thick. That being said, I have been very pleased thus far with the results. I did the application with a brush. As you will see in the pictures, it does what it needs to do when it comes to rain. I also wasn't sure what color to get. I picked the bronze cedar and when used on new wood, that is the color you get. It is beautiful! You will see the color is not quite the same (seems a bit darker depending on the light) when used on wood that has already been treated with a previous product (I don't recall what product or color was on the furniture that I re-treated) It doesn't bother me, though, that the color isn't the same. Now for the pictures. The picture of the deck boards that I treated show the true color. I have not yet treated the rest of the deck as I want to make sure to power wash and clean it first and won't be able to do that till spring. When you see the picture of the boards with the water beaded on them and then see the boards around it don't have beaded water, it's because the rest of the deck has not yet been treated. The pictures of the furniture show the "before" of one of the small end tables and the "after." It also shows an "after" of another chair and table set and big picnic table. Mind you, the furniture wasn't in the best of condition. The last time it was treated was several years ago. I am very pleased with the way this product has worked so far. If you do happen to see an area that was missed, it is NOT the fault of the product, but of the person doing the application (me!) I look forward to treating the rest of the deck (and furniture) in the spring with this excellent product!

I've ordered 3 gallons so far. I'm using this to stain the wood deck of a utility trailer. The first gallon was perfect, pitch black and very stain like in terms of consistency. It poured out like water and turned the wood completely black which is what I bought it to do. After realizing I needed more to do a second and even a third coat, I ordered another gallon. This gallon was a much thicker consistency and appeared to be a bluish gray. It had the consistency of paint vs stain. It also did not apply dark at all, and had a gray tint which eventually turned into a dark gray stain. I thought this might just be a bad gallon. I ordered a second gallon which arrived today. The package was crushed and stain was leaking out all over the concrete. The Amazon driver clearly took a picture from an angle of the box that showed no damage. So about 1/4 of the gallon was lost due to leakage. I could instantly tell that the consistency in color was the same as the second gallon I purchased. It's gray blue and very thick compared to the first gallon. I'm very frustrated that I have a trailer taken apart that I can't finish until I get a gallon that is mixed correctly.

Very easy to apply and dries quickly. Used it on old treated lumber that I power washed and made into a boat dock. Water beads up and the color looks great. How long it last I don’t know.

Seems to be good. Time will tell. Ordered twice and the wrong color was sent first time but no biggy. Returned it fine and got it right second time. Application was fairly easy and straightforward. Had just enough to brush on 2 coats within an hour of each other. My deck had to be sanded down to bare wood before applying it but will see how durable it is over the next year or so.

The product was easy to apply, but one needs to be very aware of the 20-30 minute time between first and second coats. Break the deck area down into smaller sections the size that you can apply the first coat in the time period but an area that you will be able to fully reach in order to apply the second coat. I used a brush which allowed me to really work the product in real well to obtain the best penetration on the first coat. My deck is Western Red Cedar which is a very porous and absorbs well so I needed to make sure to apply enough on the first coat to ensure a full penetration seal. The next most critical thing is to keep the leading edge of your application live or you will get a line between the the application stages. I live in the interior of British Columbia in Canada. Winters are long, wet, snowy and cold. Summers are hot and dry. All products that I have used in the past never make it through a single season. I apply them in May - June and they are gone by the end of December. I always have to fully sand and refinish every spring. Claims for Seal-Once Nano + Poly suggest I should get multiple years of use with out refinishing. Only time will tell. I am very hopeful but the jury is still out, as I only just finished the sealing.

I do belive the Quality od the Paint is Good - but frankly looks much more towards orange ( look at the back.of the chest which had no prior colour)- not he Cedar - light wood colour as advertised; yea you may argue the label looks light orange but it's nit still as.light as in picture which looks more pine like; so I'll have to use another colour to paint on top of this one ...good thing I didn't use it for my deck ...

Seal once brushes on easy and does not change color of wood. What is most satisfying is that when it rains you can see the water just laying on the surface as it will not penetrate wood.

Don’t buy it. When you apply it, works perfect and you have the water beads coming off the deck! Coming out of the winter, water just soaks right through and the coating didn’t even last one winter! Followed the instructions perfectly as well!