M.2 NVME SSD Convert Adapter Card for Upgrade MacBook Air (2013-2017)

It worked as expected for Macbook Pro 15inch 2015 with WD SN5100

Its a Good product - helps to solve the issue for upgrading my Macbook Air

I had to upgrade MacBook Air Early 2015 model's storage from 128G to 256G. I had M2 SSD from my desktop, and wanted to install that to laptop. After finding that this connector make it possible, I ordered and received on time. Inserting SSD to this connector was very easy, and it came with a screw driver and screw. However, after inserting into mac, it wasn't detected in one go. Had to pull it out, insert again (note both time it was locked properly). Finally used an eraser to clean contacts on the connector and then it got detected in next attempt. After that its working fine.

There are 2 reason why tuis product is not good. 1. From the top side the base is thick due to which not able to fit inside the grip. 2. Length of the chip is 2mm bigger than the space available. So I ordered and not able to use it. Total waste of money.

I was looking to upgrade my MacBook Air stock 128 gb with a higher capacity ssd. Google search took me to this item listed in amazon. buying through aliexpress is definitely cheaper but takes more time and returns not easy so decided to buy this adapter on amazon. delivery was quick by the seller and the adapter arrived in 2 days. Tools required: 1) pentalobe 1.2 and T5 screwdriver. both are available on amazon. 2) M.2 nvme ssd 3) pen drive . 4. apple to m.2 nvme adapter. Steps: 1. create a bootable usb using macOS Catalina. 2. open back cover of MacBook using the pentalobe screwdriver. 3. disconnect the battery . 4. unscrew the stock ssd using T5 screwdriver. 5. pull out the ssd from its slot. 6. insert the m.2 adapter into the ssd slot.make sure it goes all the way in . 7. insert the new m.2 ssd into the adapter. 8. put back the ssd screw so that both the adapter and the ssd are firmly secured in position.9. reconnect the battery. 10. put back the back cover plate and screw tight the pentalobe screws. 11. switch on the Mac and boot from the usb drive with macOS Catalina. 12. format the new ssd using disk utility and install new os as clean install or from time machine backup. Important Points to keep in mind: not all drives are compatible with the adapter. Initially I used crucial MX 500 ssd but the system didn't recognise it. Then I tried with WD black 750 SN750. initially the system recognised it but I was unable to format it . Finally, I installed Samsung 970 evo 500gb and the system recognised it instantly and everything went smooth. I would recommend to use ONLY Samsung 970 evo as it worked for me. I have also installed windows 10 using bootcamp and so far no issues.

Installed this adapter in MacBook Air however installation wasn’t smooth as the screw wasn’t properly into the hole. Had to push the ssd so as to make space for the screw. At the end the job was done. Installed 1tb successfully.

⭐️⭐️⭐️ For not fitting properly else functions normal no hibernation or sleep wakeup issue till now I've been using for more than a week quality wise it's good but fitting is little different, attach a picture else go for it... without any thoughts like it if you find this helpful

Bought it at 395/- and used with WD SN570 ssd on Mac Air 2017. I got 1200-1300 Mbps speed on both Mac and Windows (Bootcamp) As max limit for Mac hardware is around 1500-1600Mbps, I'm pretty satisfied with these speeds so far. I hope I dont face any issue of restart as stated by others. It's been 12 hours or so and it hasnt restarted even once thankfully. Definitely worth a try. BTW they sent a Good Quality screwdriver too.

Went smooth on my MacBook Air 2017 would recommend Used with a Samsung EVO 970 500Gb SSD

its not compatible at all with MacBook Pro (Retina) 15” A1398 (Mid 2013). It seems, seller, him selves doesn't know what he selling.

Used for my apple macbook air 2017. It works really well and i am been using it for 4-5 years now.

If you need a large data storage device, consider this option but be prepared to pay a little more.

***Not an employee, and this is a 100% real post** I had gotten a used Mid 2013 Macbook Air from a friend that had the hard drive fail on them. I looked for a replacement drive that was compatible and saw that they were quit expensive for such a low amount of storage space. I decided that I wasn't going to spend that amount of money on a 6 year old home lab computer for a replacement drive and looked for adapter alternatives. Most adapters I found claimed to they would only support certain brands and model NVMe PCIe drives and I wasn't going to spend the money on those name brands either. I found this adapter that didn't have a single review but claimed it just worked and I purchased it in hope that I could buy a cheaper drive and get the Mac-book up and working for a less then $50.00 US. I purchased this and a Sabrent 256GB Rocket NVMe. https://www.amazon.com/gp/product/B07KGLN3HN/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 Got me in under my budget and works great. The packaging was excellent, it arrived via Amazon Prime 2 day shipping and came with screws and a separation nut which allows for the drive and adapter to have air flow. Very happen with this combination purchase and would recommend to anyone.