Shotgun Reciever Mounts

Great addition to my CZ 712 g2. Would fit any shotgun with a rib styled rail. Mounts easily without any gun smithing. Very good quality, worth every penny.

I have a youth model 870 in 20 gauge that isn’t drilled and tapped for a picatinny rail. I tried a saddle mount that I couldn’t seem to get mounted correctly. This item seems perfect. It was easy to mount. The hardest thing about it was getting the set screws in place to make sure the mount was centered on the rib of the gun. After that, the main anchor screws went in easily with the metal bars under the mount. I put some loctite on those screws and tightened them down. It seems to extremely solid and in place to stay. I gave it a 4/5 because I have not shot the gun yet, but I am confident it will stay in place. If not, I will update. Upgraded to 5/5 after several rounds. If you correctly install this mount, it should give you no trouble, and it is very easy to install correctly. Just be patient with what I call the “set screws” to center it on the center rib. I bought another one of these mounts for a second shotgun I bought a couple of weeks ago. This time, I secured the set screws and got everything lined up on the rib before I screwed in the main screws that secure the steel bands under the rib. It was literally a 3 minute job. I love these mounts. The rib mounted red dot is a game changer for me.

Works well held tight never lost zero and all I shot through my gun was 31/2 in mags

The TruGlo shotgun rib mount is very well made. Everything fit perfectly to my Browning Gold shotgun and the Burris FastFire 3 fit the base perfectly. The side screws help get the mount centered up on the rib and help secure any sideways movement. The only issue was that the Allen wrench sent with the mount to secure the 4 hold down base screws was not the correct Allen wrench. The other 2 wrenches were correct. I sighted the gun in with 3-1/2” magnum loads and the sight did not move. I give the base a 5 and the kit a 4.75 due to the incorrect Allen wrench.

It is a nice quality piece. But it does not fit the tru glo micro sight. Make sure you select the RMR if you want to use the Tru Glo Micro sight.

Excellent quality product that installs easily. Having said that, I had to shorten the four screws that secure the mount to the vent rib of my REM. 1100 by 0.070” because they were contacting the barrel before the mount was securely tightened down. ETA: When attempting to sight the optic in, my shotgun was hitting 10" low at 10 yards and I was out of elevation adjustment on the optic. I wound up having to add two thicknesses of shotgun shell hull (0.040" total) between the rear of the base and the vent rib in order to bring POA to POI. If this begins to move over time, I will probably drill and tap the base for a brass-tipped set screw for a permanent solution. I also discovered that you can use the set screws on the sides of the base to roughly adjust windage before fine-tuning with the optic's internal adjustment.

Couldn't find a rail to fit a Phoenix Arms hp22 lr pistol until this one emerged. With some minor adjustments (sanding the 2 carriage straps down to fit underneath the barrel ribbing), the rail now fits perfectly. The Sig Sauer Romeo 1 micro red dot sight fit right out of the box! Couldn't be happier with the setup now! Lightweight, well built and a quality item!!

I was pretty disappointed to find out- like about a dozen of the reviews state - that this item just doesn't fit! It fit's the Mossberg shotgun receiver, although not very well. But it doesn't fit any of the optics listed on the item description! I tried 3 of the 4 listed as fitting, and not even close!

Works as it should as simple as that.