WEN Multi-Purpose Rolling Planer and Miter Saw Tool Stand with Extension Rollers (MSA658T)

Much better than I expected. Heavy duty, easy to assemble. Works great. Rolls great. This is not a piece of junk! It took me a long time to make a decision on a rolling table for my DeWalt planer, and am glad I pulled the trigger on this one. Not a single regret.

Sturdy stand, pretty easy to assemble. Perfect for my DeWalt planer. I especially like the ability to move the stand and planer around as need, sometimes I run very long boards through the planer and need a little extra space. The only caveat I have is with the provided bolts and/or nuts. I have a tendency to make sure all of my bolts and nuts are tight, been tightening things like this for years, however, for a couple of these, it seemed as if they may have stripped out or came very close to stripping out. That tells me that they are very soft and that seems odd considering how sturdy the stand itself is formed from. The extension rollers are nice too, but in my case, the DeWalt planer has extension tables attached to the planer and the extension rollers provided on the stand don't actually provide enough additional support to be useful. I will be adding separate extension rollers for longer work. Overall, it's a nice stand and if you have a planer, it is easily sturdy enough to support it.

The good: Love the holes for bolting equipment down Fairly easy to build. Instructions have intelligent order of operation for assembly and should be followed. (Pictures mean I didn’t read) Study enough enough for 90lb dewalt planer. The rollers work but have a single knob so they won’t be perfectly level (risk of snipe on planer). The bad No extra hardware so I always ding a minimum half star, but also no hardware shortage and they did include hardware for attaching tools so, kudos! The wheels are meant for flat smooth surfaces. My garage is 124 years only and the cement is not flat and the previous home owner had carpet and puzzle soft flooring. With about 140lbs or so of weight, the cart is worthless if I want to wheel it. I built a caster base. Which fixed problem two: The cart is a bit short for my planer and me. I’m 6’3” and like things taller to start but I think it might be short for most. The shelf is too low for me. With the spacing and the fact I’m mobile, I’ll probably never use, but it adds strength to the structure. No locktight on nuts so they may become loose over time. Plan accordingly. Overall I think it was good value and while it’s definitely not perfect, I think it is great value.

This tool stand with extension rollers works great with my Dewalt planer. The rollers support the wood well, the table is sturdy, and it was easy to assemble. Great value and functional.

Easy to assemble. Clear instructions. All holes lined up exactly and the final product is very good. I used it for a benchtop jointer. The rollers are not as heavy duty as the table I purchased from Grizzly but they are ok. I don't understand the negative reviews about difficulty of assembly.

Ignore the negative reviews where the poster(s) claim the manufacturing is shoddy and the holes don't line up. In all of those negative reviews which have photos, it can be clearly seen they're assembling the pieces INCORRECTLY. Mario is attempting to attach the top of the leg with the bottom base of the stand - he has it upside down and the holes are different at either end. The poster complaining the welds inside the bottom brackets interfere with the placement of the legs is also incorrect. The legs go on the outside of the brackets not the inside. Again, the pieces will not fit if you put them in the wrong place. I bought 2 of these and they arrived today. Follow the directions. They're decent. Biggest tip: The legs go on the OUTSIDE of the top/bottom assemblies. The directions don't state that, and the photos aren't that great. I assembled the first one (by myself - 1 set of hands) without any difficulty just under an hour. I assembled the second one in about 45 minutes. I'd recommend a FLAT assembly surface, to make it easy. I used a kitchen peninsula counter top being careful not to leave any scratches. Worked like a charm. The stands themselves are sturdy as a rock and the WEN benchtop tools mount perfectly (imagine that). There are plenty of slots on the top to accept mounting hardware in a large variety of positions. I'd wager that your chances to successfully mount other tools from different manufacturers is high. Because of the negative reviews, I was reluctant to make this purchase, but I'm so glad I did. So far, I have nothing but praise for any of my WEN tools. These stands are great.

Excellent quality and easy to assemble. Works well with both planer and mitre saw. Recommended.

The stand is sturdy and stable, and I love the way it rolls around and then locks. The roller extensions on the side are worthless as they tilt sideways because of the design. I, however, used them to stabilize the wings on the base after overlying the base with a solid board.

These are pretty good, solid construction. I bought one for my planer and liked it a lot. My RIDGID planer fits on it pretty well but not all the holes will align. I used a couple of smaller bolts to fit through the smaller holes on my planer to ensure that it was secure. The front wheel swivels and the two rear are fixed so while they are not super maneuverable it’s possible to position them where you need them. I then bought a second one for my mitre saw because I liked the extendable work support arms. These were not too hard to assemble and all the pieces were there and it was well packaged. They are heavy.

Works great. Only 1 issue with the threads on a locking knob. Was not able to thread it into the nut for the bed extension. Contacted Wen & they had a new knob sent to me in a reasonable period of time that fit perfect. As for the stand, it hold my Dewalt 13" planer very well and the mobility system is great.

The only reason this is not a five star review is that I found it hard to get a proper alignment of the bolt holes assembly took much longer than expected. Once it was built I mounted my dewalt 735 planer making it easy to move around the shop.

Great Quality, pricy but sure fills the bill, used it to mount my chop saw, rolls great when needed etc.

Delivery was very quick, cart is very well built, good value for the money. I would buy it again.