Allturn Plastic Welder, 2 in 1 Plastic Welding Kit, Hot Staples Weld Gun, Car Bumper Repair Kit for Most Plastics, Patent Number D970324(Yellow)

Bought this to fix one innocent broken item and now I skitter around the house at night looking for injured plastic to save. Laundry basket handle? Resurrected. Cracked bins? Reborn. Busted 4-wheeler fender that was one wobble away from retirement? Back on active duty like nothing happened. This thing heats up fast, the staples sink in nicely, and the repairs are way stronger than I expected. Once you get the hang of it, it’s wildly satisfying — like giving your stuff little plastic stitches instead of sending it to the landfill abyss. There is a tiny learning curve and you do need to pay attention because the hot tip is hot (shocker!), but after a couple practice runs it’s smooth sailing. Pro tip: trim the staple ends and reinforce stress points while you’re in there. Cleaner look, stronger repair, maximum gremlin efficiency. If you enjoy saving money, saving plastic, and feeling like a chaotic good repair wizard doing favors for Mother Earth, this tool is absolutely worth it. Reduce, reuse, re-fuse. Gremlin approved.

Honestly this thing is super cool! This was my first time ever using something like so. I was repairing my quads plastics and it did such a good job repairing and making it strong again. Its really fun to use and satisfying seeing the time and effort you put into it with the cool patterns it has. I will say the only complaint I do have is that it doesn't come with enough S shaped staples. Sure you get 200 but I ran through all of them which to be fair was a very big project BUT all the other staples just are only used for very specific breaks. The thinner one with little wiggles works good but I feel the S is definitely the better of the 4. Oh and it gets very very hot very fast! Use a fan or something while doing it as well so you dont inhale any of the smoke from the melted plastic. I'd buy it again and the people I showed were impressed and fascinated how it works.

Picked this up to help fix a front bumper on a car that we had just purchased. It worked well and the accessories really helped out and made the job easier getting the bumper back on and looking good. The price wasn't bad at all, saving us a few dollars from local sources.

Works really well for plastic repair here and there. Fixed a few kids sleds and a big push scoop snowshovel. Actually pretty satisfying to use. Not sure about all the accessories and there might be better models if you use it a lot, but you can’t go wrong for a starter kit. Absolutely paid for itself the first time I used it.

I hit a deer, cried for three seconds, then remembered I’m cheap. This yellow plastic welder showed up like a tiny superhero with a hot stapler. Ten minutes later my cracked bumper looked like it had a minor disagreement with a shopping cart instead of a full-on wildlife collision. The hot staples melt in perfectly, the gun heats up faster than my ex’s temper, and it works on basically every plastic part I’ve thrown at it. Zero leaks, zero regrets, and the insurance company still has no idea. Five stars because my wallet and I are laughing all the way to not-the-body-shop. Buy it, love it, hide the evidence.

First off, I love that it comes with a carrying case and a form-fitting box for easy storage, otherwise I’d have parts everywhere. I like yellow color to distinguish from other tools. 100W is more than enough; staple gets red hot in <5 secs. Also cools just as quickly - big plus when storing away. The tiny tool-tip holes are slightly less wide than the metal staples so they stay in place even upside down. Worked flawlessly on my first application - broken swivel on headphones (son sat on them, 1st pic). 4 staples later and it’s solidly repaired, no wiggle after the 2nd staple (see photos). My only beef are the wire-cutting snips (aka “dikes”, for diagonal cutters) ) which are not flush to the bottom, so I used my pair (red, in photo). Since I’m buying the plastic stapler not the accessories, per se, I still give it 5-stars. You can get a flush-cut pair of dikes here: https://www.amazon.com/IGAN-P6-Precision-Clippers-Spring-loaded-Handmade/dp/B087P191LP/ Tips for usage: (i) Welding goes quick, so mount the piece to be repaired leaving one free hand for welding. (ii) Have ventilation (fan) over the work area, as the plastic sends up an acrid smoke. (iii) After inserting, hold the work for 5-8 seconds while it cools. (iv) Seemed that the flat hot cleanup blade was a bit more risky; though I used it, I got better overall results with my Dremel as it grinds off sharp metal edges as well as smooths the plastic. Overall a most valuable addition - shout-out to Chickacanic on YouTube for her suggestion. This has the best features all-around.

I have only used this product seldomly. I do plan on using it to fix my car's front bumper but for smaller projects that I have used this for, it works amazing. For example, on my protein shaker cup, the lock latch that closes the mouth piece on the lid snapped when it fell (it was a post workout session and I accidentally opened it too strongly). Heartbroken, I thought I would need to purchase another lid ... until I remember I had this plastic welder. I was able to staple the broke piece back to the latch and now it can reattach to the lid! This was my first project working with the plastic welder and it was easy to use. The build quality is strong. It heats up fast. It is easy to use. Is there anything more I need to say? My only gripe is that the wire cutter that it comes with is a bit lacking and its use is for more larger, plastic pieces. For smaller things, like cutting off the portions of the staple that stick out, I would use another tool. Other than that, this tool works great and if you consider yourself a DIYer, you should give this tool a try!

Works great for short cutting projects and plastic welding. The 2nd time I used it was for a larger project welding my taillights coarse after making them clear. Towards the end of the second one the gun stopped working and after letting it sit for a while it worked again for about 30 minutes and then not at all again. I reached out to the manufacturer and they sent me another one overnight to finish my project. Absolutely amazing customer service.

en general buena compra, siento que se calienta un poco después de usarla un para de horas

exactly like the photo, fast delivery, works great after a few trials, chairs are still holding together

this thing works great, would reccommend!

Conforme à la description, très facile à utiliser et fonctionne tel que promis. Je suis satisfaite de mon achat.

This would be a 5 star, as I absolutely love this tool! Just takes a quick modification to be perfect, and then you can finally repair all those broken plastics! The thing is....when doing lots of melting/smoothing with the spreader tip, the unit will overheat, and takes some time to cool off (10-15mins) So...remove all the screws in body, carefully pull apart, look at how everything is supposed to be seated as you pull it apart so you can put it together right. Then cut away excess plastic as desired from body to create venting. Then put back together. You should now be able to use the tool 4x longer, and when it overheats, set it down in front of a fan, and in 1min, you're ready to go! See pic for what I did.