Auxbeam 8 Gang Switch Panel BA80, Universal Circuit Control Relay System Box with Automatic Dimmable On-Off LED Switch Pod Touch Switch Box for Car Pickup Truck Boat UTV ATV, Blue 2 Years Warranty

Had an issue with this product, but the seller sorted it in a very professional way, I wouldn’t hesitate to recommend this seller, The Auxbeam product is a very useful tool for your van/4x4 build.

👍

Excelente producto, ya que cumple su función y claro que da aspecto diferente a tu vehículo, me gustaría que trajera alguna seña que se identifique manualmente para encender las luces y no voltear a ver el panel directamente.

The received package is very nice, all parts as described, I am using it since two weeeks. So far good. One thing, i didn't notice that has auto dim, may be due to location of switch- fixed on the roof ( inside)

Overall I'm very impressed with this kit. It's super easy and straight forward to install, and the quality is pretty good for only around $150 compared to some of the more expensive switch panel kits out there. Everything was great except for 2 major things - The first issue is that the circuit breaker is cheap and fragile. Weirdly it seems that the quality of the circuit breaker is a lot worse than literally everything else in this kit. I didn't drop it or anything but it just jammed up for some reason before I had even finished installing this kit on my truck so I ended up having to use my own circuit breaker which cost me an extra $20. Not a huge deal if you don't wanna use the circuit breaker but I would highly recommend using it. This is probably just an unlucky thing, but it's still an issue. My second issue is that the length of the actual switch panel cable doesn't really seem long enough. Maybe it would be fine for an atv but for a truck it may not reach far enough to mount the switch panel where you want to. In my case there was only about 2 ft of cable in my cab by the time I had ran it through the firewall and into the control box under the hood which greatly limited my mounting options. This can be mitigated by purchasing an extension separately but then you're spending extra money and waiting longer for it to arrive if you didn't know you'd need it until you started installing the kit. This is an issue in my case and may not be for others, however I imagine many people are buying this for their truck as well so this may also be an issue for lots of other people. Other than these 2 issues, I am very impressed with the quality (aside from the circuit breaker) and value of this kit, however I can't really say that it's well thought out because of the length of the switch panel cable. If these issues don't apply to you then I highly recommend this kit to anyone because it's a good value and it's easy to install. If you're putting this in a truck like me make sure the cable will be long enough and if not then order an extension or 2 with the kit so you're not waiting for it to mount your switches.

First >> one should go to YOU TUBE for installing instructions on your UTV. The longer Red 12 volt cable was not long enough to reach under the hood from the battery area to the fuse box. Now hooking Positive cable up on the battery. One has to raise the square nut under the screw, I used a Zip tie with a washer, to give a lift to the nut. Also I shrink wrap and dialectic greased>> all bare wire connections. The fuse tap to power the controller worked. One has to modify the fuse box by drilling a hole and maybe notch the case. To keep water out of fuse box. I put some sturdy gorilla type tape down the side. Covering the hole in the fuse box. Mounting the 8 switched controller I put heavy 1 1/2" x 3" velcro from 3m. plus>> 2 sheet metal screws into the plastic dash up high and to right of steering wheel. I did hook up a 12 volt digital monitor with USB in a vacant switch port/hole. Hooked it to the 10 amp fuse in the controller. It is switched now....great for checking the battery output. And if one needs to charge a cell phone, etc. Had to buy some wire and connectors. Some loom also>> from the 60 amp breaker to the fuse block area. Works good for my needs.