Plug-in Electric Panel Wall Heaters for Indoor Use, Energy Efficient 24/7 Heating w/Safety Sensor Protection, Patented Quiet Fan-less Design, Easy 2-Min Install, Space Heater, Made in USA

The Envi wall heater has been a great addition to our home. We put our first Envi heater in a room that stays colder than the rest of our home in the winter, and it has helped to keep the room comfortable. Compared with a space heater, the Envi wall heater does not take away any space in the room since it mounts on the wall and is thin. Also, it runs silently--all the heat with none of the sound! Having no moving parts means there is no filter to clean, and from what I can tell, the way it is designed seems to be as energy efficient as possible for an electric heater. And the design is attractive--not something I feel like needs to be hidden in a nice home. Attached is a photo of our newly installed heater from Amazon along with a video showing me unboxing and installing the heater. Since this was my second Envi heater to install, I felt confident with making a video from start to finish. When I installed the first heater, I thought there was a bit of marketing hype to claim that it "installs in minutes." When I went to install my first heater, I gathered the normal tools…a level, tape measure, drill, screwdriver, etc. But then I was pleasantly surprised to find that the box insert doubles as an installation template that rests against the wall and floor. That means NO level and NO tape measure is required. Also, the drywall in that room was only a few years old, and the included drywall anchors went right into the wall like butter with a cordless screwdriver…NO pre-drilling needed. It was really fast and easy to get the two mounting clips into the wall in the perfect position. From there, the heater just hangs on the two mounting clips for a level, flush-to-the wall installation. I'm also a bit of a perfectionist. Having a long power cord dangling from the wall or tied up next to the heater is unsightly. But they thought of everything…any extra power cord length can be pushed back into the cavity where the cord comes out of the heater, which just leaves the exact length needed to reach the power outlet. And the power cord has a right-angle plug, so the cord rests neatly against the wall instead of sticking out from the wall. There are also electrical punch-out holes on the back of the heater for people who want a direct wired heater with no exposed outlet. The only thing I learned while installing this new heater (which you can see in the attached video) is that this heater was installed in an older home, and the drywall is extremely hard compared with my first installation. If I were to install the heater again, I would just pre-drill the two holes before screwing in the wall anchors. Other than that, installation went smoothly with no surprises. The Envi heater draws up air from the floor and outputs a steady stream of silent heat out the top of the heater. The thermostat lets the heater run when needed and automatically turn off when your room is at or above your desired setpoint. The top vent is angled slightly outward, so the wall above and behind the heater stays at a temperature that is still comfortable to touch. And the front of the heater stays even cooler during operation, so I don't worry about a child or pet getting unpleasantly surprised if they touched the heater while it is in operation. It is easy to set and forget! Here's to a more comfortable room!

I’ve been using the **Envi Plug-in Electric Panel Wall Heaters** for **3–4 seasons**, and they continue to **work fantastic** here in New England. **Heating Performance:** I have a few rooms that tend to run colder, and these heaters do a **tremendous job** warming them up. I currently have **two units in separate rooms**, and both perform reliably, providing consistent and comfortable heat even during harsh winters. **Ease of Use & Installation:** Setup was straightforward — plug in, mount on the wall, and they’re ready to go. They don’t take up floor space, which is perfect for smaller rooms or apartments. **Durability & Longevity:** After multiple seasons of use, they still run efficiently and quietly. The build quality feels solid, and there’s been no decrease in performance over time. **Final Verdict:** If you need **efficient, space-saving electric heating**, the **Envi Plug-in Panel Wall Heaters** are excellent. They handle cold rooms with ease and are perfect for year-round comfort. Highly recommended for anyone in colder climates! ❄️🔥

I was so excited to try these heaters. We have an older home and have used 1500 watt electric space heaters for years, no problem heating rooms. I kept seeing the Envi heater ads on social media, making these look incredible, very safe, efficient and could even help to lower our electric bill. I went all in and purchased three, two of the 500 watt for two approximately 10 x 10 upstairs bedrooms, and one 1000 watt for an approximately 12x 12 downstairs bedroom. Installation was pretty easy, I installed them when our outside temperature was in the forties. One upstairs bedroom seemed to heat the room well, the other, not so much. I kept turning the thermostat on the heater up and up and still couldn’t get the room above 67 degrees. The downstairs bedroom was even worse. I reached out to Envi customer service, thinking the 1000 watt should easily be able to heat our bedroom on a forty some degree day. I figured we had a defective heater and would exchange it. Customer service was a joke, no troubleshooting or anything, just told me that the heater would not work for our space and that we must not have enough insulation. Huh? That was based off of no questions asked by support, so it seems they don’t have much faith in their products working. No help with a return or anything, luckily I purchased through Amazon. This morning is our first truly cold day, outside temperature in the twenties. The heater that seemed to be working well upstairs is struggling, thermostat set the highest, but room temperature is 63 this morning. Second bedroom temperature is 53, that heater is also set to the highest. I just went out to our garage to get our old space heaters. Returning all three Envi heaters. What a joke.

We are on a second one of these having bought the first one 13 years ago. We only use it in a small area with a plug-in thermostat purchased several decades ago. We would had expected the first one to last longer however they are not cost prohibitive. The unit heats well and is the safest we could find for our application. We researched other products when the first one died and did not feel there was are better replacement. Years ago we used heaters that were ceramic style wall heaters that did not have covers in bedrooms. They were not as efficient and without a cover would expose one to a hot surface. We believe, when paired with a separated thermostat, these are a good option for smaller spaces. Compared with most other independent space heaters they are much less likely to cause bodily harm. They are very quiet and attractive. When first initiated they are quite smelly and need to cure over several hours. We would advise opening windows.

Out house has a basement bedroom that is far colder (8-10 degrees) than the rest of the house. If I warm it to a comfortable temperature using our regular house furnace, the rest of the property gets too hot. So, I bought a small fan heater - it worked, but it didn't allow the room to be warmed early in the morning (when someone is still asleep) because the fan is very loud. So, I bought this 500W wall-mounted convection heater. The main reasons for choosing this one were: (i) should be silent; and (ii) it has a pushbutton on/off switch so, by leaving the heater's switch in the "on" position, it should work with a WiFi smart outlet. It took me about 10 minutes to mount to the wall, using the template that is built into the packaging. Plugged it into a WiFi smart outlet. Pushed the heater switch to "on", and turned the thermostat knob all the way to the right. Within moments, I could feel heat rising from the top vents. Bottom line: it works extremely well. It's almost completely silent (I can hear a vague hum when I put my ear next to it, but can't hear a thing normally). I set the smart switch to turn it on at 5AM, so the room is warm when the occupant gets up. Also - for people who prefer a VERY dark bedroom - it has a rather bright red indicator light at the top-right, but it automatically dims in a dark room. All in all, it's a definite 5 stars from me. I'm posting this in May 2025; I'll come back to edit this review if any problems arise.

We purchased the 1000-watt model for a bedroom of about 120 square feet to avoid using noisy central air at night. Unfortunately, the heater did not meet our expectations, and given its high price, it was not worth the purchase. Here’s a closer look at our experience: DESIGN AND QUALITY The heater has a stylish and sturdy design with a high-quality feel. Inside, there is a compartment to neatly hide an extra power cord—a thoughtful touch. INSTALLATION Installation was very simple. All it took was a screwdriver and about 10 minutes to mount it securely on drywall. FUNCTIONS We opted for the model with a rotary thermostat, as we didn’t see the need to pay extra for a display and timer. Instead, we paired it with a Tapo smart plug featuring energy monitoring, which works excellently as a timer and tracks energy consumption. However, the engineers made a baffling decision regarding the power indicator. While it shows whether the power is on, it doesn’t indicate if the heater is actively heating or in standby mode—there is no heating/standby indicator. On the other hand, they did include a twilight sensor that dims the power indicator in the dark, which seems unnecessary. EFFICIENCY Our goal was to maintain a temperature of 68–69°F in the basement bedroom at night so we could avoid using the central air system. At its maximum thermostat setting, the heater performs as expected, but only when outdoor temperatures aren’t too cold. When temperatures drop below 30°F, it struggles to keep up and fails to deliver adequate heating. COMFORT OF USE The advertising promises “dead silence,” but that’s an overstatement. While it is quiet compared to fan heaters, the thermostat makes a loud clicking sound when it turns on and off, which is far from silent. Additionally, there are blue flashes visible inside during this process. After a few months of use, the heating element developed a faint but noticeable hum, similar to the sound of high-voltage power lines.

So we just got our forever home which is 3800 Sq. Ft. Compared to our older 2000 sqft home our bill is the same and this is one of the reasons why. Now to start out we now have a basement (finished) and newer hvac but we DO NOT USE THE HVAC HEAT AT NIGHT. the efficiency end of this come from a lack of a fan and a simple heating element using convection. No motor = less power draw. Now these (400 watt) units do not hear a room very quickly. But being on a thermostat means yoy can just leave it on and it will shut down when the room is warm. The problem with power draw on a full home HVAC is that once Temps drop below a set temp (usually 45 ish degrees farenheit) there is an element that run constantly whether it's blowing air or not. This is to allow system to begin blowing warm air when the blower system kicks on and reduce startup time. This happens always when the system is in heat mode regardless of the set temp of your air handler. (This is why reducing thermostat temp doesn't change your bill a whole lot) so we have 4 of these units. One in each bedroom. We run the central heat to 72 until bed and then turn system OFF. These heaters maintain fine but will struggle to bring a large room to temp if left off but ALL 4 RUNNING USE 1600 WATT TOTAL. that us only 100 watts more than a small desk heater from Walmart. In the morning we run the central heat to catch the rest of the house up, but staying warm without running 3.5 tons of hvac and roughly 5000 watts has kept a power bill of roughly 240 for this large house with all electric appliances. Down to 80 in the fall when demand is significantly less. We are in north Alabama so it's not crazy cold all the time but know how these systems work will help you optimize its efficiency. Lower wattage units tend to last longer, higher watt heat faster. And there will be a smell when you first start it up, INSTRUCTIONS SAY TO LEAVE HEATER ON HIGHEST SETTING FOR 72 HOURS. presumably this is evaporating whatever coating is used in the manufacturing process but it does go away once it's run. This is only my 3rd review ever. 5 stars. Stay warm

Purchased for garage wall where pipes were freezing. It worked all winter , heat was preset and for the first time (and after a horrible winter) we were not afraid of the pipes bursting. I also felt safe with the wall heater (always concerned about a fire) as it did not feel hot to touch

Muy bonito; nada estorboso, incluso pasa desapercibido sobre todo porque no hace nada de ruido! Muy recomendable

There was no heat in my bathroom. I had to find something that was easy to install and wasn't a portable one. This thing is GREAT! It screws to the wall and plugs in to the wall plug. I was worried about it throwing the breaker, but it doesn't. The bathroom is small and it heats it very well. In fact, it is set on the lowest setting and is never turned up any higher unless it is in the winter and I will turn it up a bit before I have a shower. On it's lowest setting, it isn't running non-stop in the winter. It is the perfect little heater!

We purchased this wall heater for our 10' x 15' Boot Room. It came quickly, packaged well with great instructions (I did find the tutorial of installing helpful for those handy "tips") We were going to hardwire it in, but then chose to use the simple plug in - really liked that the "extra cord" can be tucked inside the unit leaving a clean look. The install itself was simple for one person (thanks to the handy template!). It looks great on the wall, is cool to the touch and whisper quiet! I like the added confidence that if it is somehow comes off the wall it will automatically shut off. Worth the purchase!

Buen producto, excelente precio. Se monta fácilmente.

This is an awesome heater for a bathroom or small space. Easy to install. Safe. No moving parts. Heats surprisingly quickly, Energy efficient. Takes up little valuable space. My only wish is that there was a better range of settings on the built-in thermostat (ie an option to make it a bit less warm - lowest setting is a bit warmer than we really need). Perhaps in a larger space that would be less of an issue (we have it in a very small tiny house bathroom)