DAYUAN 28Pcs Pull and Press Sleeve Kit Remove Bushes Bearings Seals | Bearing & Bushing Press Tool, Removes & Installs Bushings Bearings Seals, 40CR Steel, Universal Application, Storage Case

worked great. used it to press out the bushings on my chevy truck. seems to have every size in the kit. I did end up greasing the bearings on the tool before using them. I would say it is necessary before using.

This tool broke while trying to use it for its intended purpose threaded rod snapped in half. I did get the bushing installed with a smaller threaded rod. Company contacted me and made things right.

thank you very good tool

Works great. I would prefer a couple smaller sleeves and couple less large ones. Do NOT use a high power impact wrench with this. It will mar up the hex head pretty badly.

you need a 23mm wrench and a deep deep deep socket quality parts, very heavy had every size for the big bushings but to big for the small bushings . i used an small impact socket as the pusher

Exactly what i needed to remove the rear diff bushings on my 07 subaru s-gt

Used this for the two axle bushings on a Grand Cherokee front D30, still on vehicle, so I only used the M10 rod, of which there was fortunately two. I initially tried to use it to remove the bushing on the left and it broke at the end of the rod and bent it so badly I couldn't even use what was left. After that I only used it to install (heating the axle and freezing the bushing) the bushings and the rod bent again in several different directions so that it is difficult to thread the nut on one end. I have a Cherokee as well and I'm hoping it can make it thru that job before it is so bent the nuts won't thread. I really don't want to remove the axle just to change the bushings with my larger ball joint tool. I consider this purchase a borderline waste for me. I was only saved because of the extra rod, that's why it is two not one star. The larger rods "may" be better so if you need them, I can't talk about their durability just the M10 but not pleased.

It’s hot alotta sizes but won’t work on a 90-2005 mx5 Miata control arm bushings. Nothing small enough in the kit. I had to use a 7/8th that I modified to work. For the price it should have EVERY SIZE. Not to happy..

En av de bästa avdragare /monteringsverktyg jag har använt.

Didn't last one bushing. Broken 2 threads, and once more pressure given, threads are gone, nut seized on it. Wouldn't buy again ever.

Viene con aros de varios tamaños, tambien viene con varios tamaños de barras roscadas. Es buen producto a un buen precio.

使える、力ないと大変かも。 筋トレして使用するといい。

Good assortment of sizes, also the ez threads work well.