Amazon Basics Smart In-Wall Outlet, Works with Alexa Only, Individually Controlled Outlets, Voice Control, WiFi, 15 Amps, 2.4 GHz, No Hub Required, White

I have two Echo Dots. For about two years, I used my first Echo Dot, “Alexa”, as little more than an alarm clock, timer, music player, etc. After buying my second Dot, “Ziggy”, I started setting up routines, and decided to set up a way to automatically turn my living room lamps on and off. For that, I needed an Alexa-enabled smart device, and bought the Amazon Basics smart in-wall outlet to control the lamps through Alexa. The installation instructions were clear, and the only ”difficult” part was stuffing the new switch and wiring into the shallow outlet box in my older home. You will be hard-wiring the smart outlet. Figuring out how to set everything up with the Alexa app CAN be relatively easy at times, but using the app is NOT intuitive. For starters, you’ll use the app to set everything up. In my case, I customized the names for each lamp and assigned them to the “living room”. That lets me control each lamp by itself, or both at once. Over time, I recommend you take time to explore the app to see the kinds of things Alexa can do for you. I’ve been using the smart outlet for about 6 months now. From the very first day, the outlet has never given me any trouble. While I sometimes have to reset my Dots, on the other hand, once installed, I NEVER thought about the outlet again until I changed my Internet provider two weeks ago and had to change the WiFi setup for the smart outlet. Bottom line: The smart outlet was inexpensive, easy to install and set up. It has never had any connectivity issues. The outlet instantly responds to voice commands. I can recommend this outlet without hesitation.

I use this to power my landscape lighting transformer. Previous to this I used a smartplug to run the scheduled on-off. The existing outlet on my small entryway didn't have a rain enclosure and by using a smartplug there wasn't enough room install one. While rain hasn't caused an issue yet, I was always concerned. Sometimes the rain would blow into the entryway. This resolved that issue by being able to remove the smartplug and installing this in-wall outlet. Installation was easy (just make sure you flip the circuit breaker) and I used the ENERLITES Extra-Duty Weatherproof Enclosure, also from Amazon, to protect if from the rain. The plug connected instantly to the Amazon app and my wi-fi, and hasn't had any connection issues even though it's outside and essentially encased in the brick wall of my home. I changed my routine to use this outlet and everything works as I hoped for. It's now been raining for several days and no problems. Very pleased.

Super easy setup. Alexa app already alerted me to the new device once I turned on the power. No need to scan the QR code if you purchase the smart outlet on the same account as your Alexa devices. Each of the two outlets are independently controllable just like having two separate smart plugs. There are two push buttons between the outlets to manually activate or deactivate each outlet if needed.

The Amazon Basics Smart In-Wall Outlet is marketed as an easy-to-install and affordable smart home solution. While it does have some positive features, there are also several drawbacks that may make it a less than ideal choice for some consumers. One of the positive features of the Amazon Basics Smart In-Wall Outlet is its affordability. Compared to other smart outlets on the market, this product is relatively inexpensive, making it an attractive option for consumers on a budget. Additionally, the installation process is straightforward, and the outlet can be controlled using a smartphone app or voice commands. However, there are also several drawbacks to the Amazon Basics Smart In-Wall Outlet. One of the main issues is its reliability. Some consumers have reported that the outlet may disconnect from the Wi-Fi network or fail to respond to commands, making it unreliable for use. Additionally, some consumers have had issues with the outlet's compatibility with certain smart home systems, such as Apple HomeKit. Another issue with the Amazon Basics Smart In-Wall Outlet is its design. While it is designed to fit into a standard wall outlet, some consumers have reported that the outlet's size can make it difficult to install in certain spaces, such as cramped electrical boxes. Additionally, the outlet's bulky design may make it difficult to use other outlets in the same location. Finally, some consumers have expressed concerns about the security of the Amazon Basics Smart In-Wall Outlet. While the outlet does have some basic security features, such as encryption, some consumers have reported that they are uncomfortable with the idea of a smart outlet being connected to the internet and potentially vulnerable to hacking or other security threats. Overall, the Amazon Basics Smart In-Wall Outlet has some positive features, such as its affordability and ease of installation. However, its reliability, design, and security features may make it a less than ideal choice for some consumers. Before purchasing this product, it is important to carefully consider your smart home needs and preferences, as well as any potential security concerns.

Exactly what we needed: a smart outlet that had the ability to individually name and control each of the two outlets separately. How we use it: Our home has an extensive Lutron automation system which is fabulous. And a great feature is that it integrates with Alexa to bring voice control to our whole home. However, Lutron does not make a controllable duplex outlet - go figure / makes no sense. That's where these outlets come in a fill the gap. While we cannot control them with the Lutron system, since we now do everything via Alexa voice control (or pre-programmed Routines), these integrated easily with routines and schedules appropriate for our use. We have three of them controlling mood lights, display lights, and holiday lights (including the Christmas tree during season). If you wonder, these are identical to the ones sold at Home Depot with the following exception. If you use the app that comes with the HD ones, you can control them individually. But if you integrate them with Alexa, the duplex is controlled as one, not individually. Since Alexa control was key to how we "speak to our house", the HD ones had to go back and these from Amazon replaced them, working perfectly. Highly Recommended

It works very well. I use it to control lights and other devices, and the integration with Alexa is immediate. Installation was simple, and so far it has been stable, with no disconnections. If you already use the Amazon ecosystem, it is a practical and reliable option.

After having been through several smart wall outlets, this was by far the easiest to set up in the easiest to use!!!

If you’re looking for something to activate on-demand, perhaps this is your item. If you need something that will work on a routine, not so much. In my case I need this to control outside lights to turn on at sunset and off at sunrise. Seems simple enough until you try to set it up in the Alexa app. So far, my experience in a week of screwing around with the app has been everything from not coming on at all, coming on but shutting off a few hours later to coming on and not shutting off at all until I manually shut it off well into the daylight hours. The app does little to inform you of the current operating routine, other than yo inform you that a routine is active (doesn’t tell you what the routine is) and that the light is either on or off, or that it has lost communication (seems to have no problem regaining communication when I send an on or off command). Calls to Amazon customer service have thus far gone unreturned. Unfortunately, this is exactly what I expected from Amazon. The product this is replacing, made by Belkin, worked great for several years until that company decided to no longer sell smart plugs or support their products, rendering their products obsolete and unusable. Apparently now I’m stuck having to buy and return products from a few manufacturers before finding one that functions properly again

Lo compré porque leí en los comentarios que sí se podía utilizar en México. Tuve un inconveniente al colocarlos en la pared porque la caja de instalación está un poco grande, sí cabe en los registros/chalupas, pero si hay más cables no se puede colocar. Me costó trabajo, pero estos fueron los pasos que hice ya instalados para conectarlos con Alexa: 1. Cambié mi cuenta a EEUU. Entré al link de preferencias de Kindle y cambié la configuración de paías a Estados Unidos: https://www.amazon.com/hz/mycd/myx#/home/settings/payment 2. Abrí la App de Alexa desde mi celular > Agregar dispositivos > Enchufe > Marca Amazon Basics 3. Te da varias opciones, yo elegí "Toma de corriente empotrada" > Si > ¿No tienes un Código? 4. Sigues las instrucciones para activar el modo vinculación hasta que parpadee en verde y rojo. 5. Esperas, te pide que selecciones el WIFI y listo. Los nombra Primer Enchufe y Segundo Enchufe. Solo hace la función de conectar o desconectar la corriente, si quieren funciones especiales hay que hacer rutinas en la app.

Easy install and works like a charm. Much better that bulky plugs hanging from the outlet

Justo lo que buscaba, un enchufe que fuera montado dentro de la pared, no tuve que hacer nada para vincularlo a mi cuenta de Alexa, en cuanto subí el switch de la corriente se vinculó en automático, tardo un par de minutos parpadeando uno de los leds verdes y en cuanto recibí la notificación en la app de que se habían agregado 2 dispositivos nuevos, dejo de parpadear. No tuve que cambiar mi cuenta de país, estando en México mi cuenta se configuró el enchufe solo. No sé si tenga que ver que cuando lo estaba comprando, me apareció una opción que acepte de vincularlo a mi cuenta de Alexa para una configuración rápida.

Siendo Noviembre 2024, no tuve problemas para usarlo en México. Se puede controlar con voz en español con cualquier Alexa, o bien desde la app de Alexa. Fácil de instalar porque viene etiquetado con fase, tierra y neutro. Sólo no le pungo cuatro estrellas porque no tiene muchas funcionalidades por defecto. Sólo prender y apagar cada uno de los tomacorrientes. Si quieres timers, apagado automático y demás, debes configurar tus propias rutinas.

Me encanto